CHIGEE MSFP0089 CG Remote Control Pro Instruction Manual
- June 13, 2024
- CHIGEE
Table of Contents
CHIGEE MSFP0089 CG Remote Control Pro
Product Information
- Product Name: CG Remote Control Pro
- Product Model: CGPro MSFP0089
- Product Size: 65.726.818.9mm
- Product Material: PC+GF10 Type-C
- Operating Frequency: 2400 – 2483.5MHz
- Battery Type: Rechargeable Lithium-ion
- Battery Capacity: 300mAh
- Charging Interface: Type-C
- Input Voltage: 5V
- Input Current: 0.5A
- Manufacturer: CHIGEE Technology Co.,Ltd
- Production Address: 2nd Floor, Building 2, Sanlian Industrial Park, Shiyant Street, Bao’an District, Shenzhen
- Compliance Standard: GB4943.1-2022
Product Usage Instructions
- Before using the product, read the user manual carefully and keep it for reference.
- To charge the remote control, connect the Type-C charging interface to a power source using a suitable cable.
- The charging indicator will be red while charging and turn green when fully charged.
- The button light on the remote control will be blue when clicked.
- The remote control can be used for various functions on Carplay, Auto, and Hicar screen projection pages.
- In Bluetooth mode, briefly press the left and right buttons to switch songs. The middle button can play/pause.
- During video recording, you can switch between camera preview, lock the video, and take photos using the remote control.
- The remote control supports Carplay, Auto, Hicar, and Bluetooth modes for screen projection control.
- To pair the remote control with the device:
- Go to System Settings – Devices – Remote Control – Click on ‘Pair’.
- Press any button on the remote control (the blue indicator light will flash quickly) and wait for the device to display “paired”.
- If pairing timeout occurs, repeat the above operation.
- Follow the safety guidelines provided in the user manual to ensure safe operation of the remote control.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 0cm between the radiator and
your body.
Introduce
Function Introduction
-
Link
The application operation control can be carried out through the remote control on the screen projection pages of Carplay, Auto, and Hicar. -
Video
When in the recording screen, you can switch between camera preview, lock the video, and take photos. -
Bluetooth
When in Bluetooth mode, briefly press the left and right buttons to switch songs, and the middle button can play/pause. -
Any state
Under any screen, you can long press to switch to the homepage, screen projection camera screen, and short press to control incoming and outgoing calls.
*The projection control supports Carplay, Auto, Hicar, and Bluetooth modes.
pairing
- Go to System Settings – Devices – Remote Control – Click on ‘Pair’
- Short press any button on the remote control (the blue indicator light on the remote control flashes quickly) and wait for AIO-5 to display ” paired
If pairing timeout occurs, please repeat the above operation
OPI
Name | CG Remote Control Pro |
---|---|
P/N | MSFP0089 |
Size | 65.726.818.9mm |
Material | PC+GF10% |
Charging interface | Type-C |
Operating
frequency
| 2400 – 2483.5MHz
battery| 3.7V 300mah
charge| 5V – 0.5A
FCC
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuan t to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterferenc e to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or reloca te the receiving antenna.
- Increase the separation between the equi pment and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference r eceived, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
GB4943.1-2022
Compliance Standard:GB4943.1-2022
Manufacturer: CHIGEE Technology Co.,Ltd
Production Address: 2nd Floor, Building 2, Sanlian Industrial Park, Shiyant Street,Bao’an District, Shenzhen
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>