JBC FAE070 Flexible Arm With Clamp ø50 mm Instruction Manual

: June 13, 2024
: JBC

Table of Contents

Packing List
Assembly Example
Usage Guidelines
Accessories
Nozzle Replacement
Clamp Dimensions
Specifications
Documents / Resources

www.jbctools.com
INSTRUCTION MANUAL FAE070
Flexible Arm with Clamp ø50 mm

This manual corresponds to the following reference:
FAE070

Packing List

The following items are included:Flexible Arm ………………………………………… 1 unit already assembled:
Ref. FAE083 Round Metal Nozzle for FAE
Clamp …………………………………………………. 2 units![JBC FAE070 Flexible Arm With Clamp ø50 mm

Packing List 1](https://manuals.plus/wp-content/uploads/2023/10/JBC-FAE070 -Flexible-Arm-With-Clamp-o50-mm-Packing-List-1.png)Screws …………………… 2 units
DIN-965 M4x20 – black
Washers …………………. 2 units
DIN-9021 ø4.3 mm – black
Manual ………………………. 1 unit
Ref. 0019184

Assembly Example

JBC FAE070 Flexible Arm With Clamp ø50 mm - Assembly * Not included, sold separately.

Usage Guidelines

JBC FAE070 Flexible Arm With Clamp ø50 mm - Guidelines To avoid breaking the arm, do not extend the arm more than 70 cm / 27.6 inches from the center of its base and do not go below the minimum bend radius of 20 cm / 7.87 inches.
Do not install the flexible arm on shelves or higher levels than the work bench. Forced bending radii can cause the arm to break.
Note: In case of a breakage, the windings can be plugged back into each other. To do this, align the windings with one another and push them back together with strength.
When the flexible arm loses firmness, it must be recompressed.
For a greater compression, turn it slightly clockwise.
Once the arm is compressed, adapt its position again. JBC FAE070 Flexible Arm
With Clamp ø50 mm - Guidelines 1

Accessories

The Suppied nozzle can be replaced by one of the following nozzles. Choose the one that best suits your needs.

| |
---|---|---
FAE080
Rectangular Nozzle for FAE aprox. 170 x 90 mm / 6.69 x 3.54 in| FAE081
Round Nozzle for FAE aprox ø 120 mm /
ø 4.72 in| FAE082
Large Rectangular Nozzle for FAE aprox. 227 x 107 mm / 8.94 x 4.21 in

Nozzle Replacement

JBC FAE070 Flexible Arm With Clamp ø50 mm - Accessories
3 The bayonet system makes it easy to change the nozzle. To do this, hold the tube with one hand and with the other turn the nozzle counter-clockwise and pull it out to remove the nozzle.
To install a new nozzle, turn the nozzle bayonet clockwise to lock it in place.
The nozzles are designed in such a way that they can be used with a hanging arm or be lying on the workbench.

Clamp Dimensions

JBC FAE070 Flexible Arm With Clamp ø50 mm - Dimensions Notes…………

Specifications

FAE070
Flexible Arm with Clamp ø50 mm
Ref. FAE070

– Net Weight:	2.2 kg / 4.89 lb
– Inner Tube Diameter:	ø50 mm / 1.97 in
– Fixing Clamp:	For a table thickness of approx. 60 mm or less
– Total Package Dimensions / Weight: (L x W x H)	1050 x 170 x 120 mm / 3.0 kg

41.34 x 6.69 x 4.72 in / 6.61 lb

Complies with CE standards.
ESD Safe. Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
**** This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

www.jbctools.com
0019184-080623

Documents / Resources

| JBC FAE070 Flexible Arm With Clamp ø50 mm [pdf] Instruction Manual
FAE070 Flexible Arm With Clamp 50 mm, FAE070, Flexible Arm With Clamp 50 mm, Arm With Clamp 50 mm, With Clamp 50 mm, Clamp 50 mm
---|---