CARVIN CM68 Unidirectional Dynamic Microphone Instruction Manual
- June 13, 2024
- CARVIN
Table of Contents
CARVIN ENGINEERING DATA
MODEL CM68
INSTRUCTIONS
UNIDIRECTIONAL DYNAMIC
MICROPHONE
CM68 Unidirectional Dynamic Microphone
The Carvin CM68 is a rugged unidirectional microphone with a highly effective
built-in wind and “pop” filter.
The CM68 is Carvin’s finest hand held microphone designed for the vocalist
requiring a tight, natural sound with crisp highs and strong bass without
boominess. We recommend this microphone to performers who work close to their
mics, where high volumes can be obtained without distortion or explosive
breath “pop’s”. An excellent choice for club use, rock singers, or any
vocalist requiring the best in vocal reproductions. Designed for high end
studio recording and broadcast applications.
Microphone Features:
- Bright, clean sound.
- Spherical filter to control explosive breath sounds (“pop”) and wind noise in outdoor locations.
- Wind and “pop” filter readily removable for cleaning or replacement.
- Effective cardioid pickup pattern to minimize background noise and undesirable effects of studio and location acoustics. Rear and side rejection uniform to very low frequencies and completely symmetrical about microphone axis.
- Versatility – designed for both stage and studio use.
- Cartridge shock-mounted for protection.
- Includes professional 20’ XLR cable.
Polar Pattern
Cardioid — rotationally symmetrical about microphone axis, uniform with
frequency (see Figure 2)
TYPICAL POLAR PATTERNS
FIGURE 2
INTERNAL CONNECTIONS
ARCHITECT’S SPECIFICATIONS
The microphone shall be a moving coil (dynamic) type with a frequency response
of 45 to 15,000 Hz. The unit shall have a cardioid polar characteristic. The
cancellation at the sides shall be approximately 5 dB and the cancellation at
the rear shall be 15 to 20 dB. The microphone shall have a rating impedance
of 300 ohms designed for 600 ohmspreamps
The microphone connector shall be a 3-pin professional audio type designed to
mate with a XLR male connector. The microphone shall be provided with a swivel
adapter adjustable through 90° from vertical to horizontal. The adapter will
mount on a stand having a 5/8”-27 thread. The overall dimensions of the
microphone shall be 5.125” (130 mm) in length and 2.080” (53 mm) in diameter.
GUARANTEE
This Carvin product is guaranteed to be free from electrical and mechanical
defects for a period of one year from date of purchase. Microphones dropped,
misused or exposed to moisture are not covered under warranty. Please retain
proof of purchase date. This guarantee includes parts and labor.
This guarantee is in lieu of any and all other guarantees or warranties,
express or implied, and there shall be no recovery for any consequential or
incidental damages.
SHIPPING INSTRUCTIONS
Carefully repack the unit, have it insured, and return it prepaid to:
Carvin
Service Department
12340 World Trade Drive
San Diego, CA 92128
CM68 FREQUENCY RESPONSE
MODEL CM68 UNIDIRECTIONAL DYNAMIC MICROPHONE SPECS:
Type: Dynamic
Frequency Response: 45 to 15,000HZ
Output Level (at 1,000 Hz, 300 ohms): Open Circuit Voltage -74 dB, (0.19 mV)
Cable: CM68: 6.0m (20 ft) three-conductor shielded broadcast type with XLR
professional audio connector
Case: Dark grey enamel die casting and dark grey enamel steel mesh grille
Swivel Adapter: Slip-in positive-action, adjustable from 0° to 90°, with
standard 5/8“-27 thread
Net Weight: (less cable) 8.5 oz.
12340 World Trade Drive, San Diego, CA 92128
800.854.2235 carvin.com
References
- Carvin Audio Great Sounding Gear For Musicians and Sound Professionals
- Manual-Hub.com – Free PDF manuals!