CHI 13108 Dry and Steam Iron User Manual

CHI 13108 Dry and Steam Iron

Product Information

This is an iron appliance designed for household use. It has various safety features and parts that allow for dry ironing as well as steam ironing. The iron has a titanium ceramic soleplate, a steam shot lever, and a temperature setting dial. It also includes a spray nozzle, water fill door, spray button, power/ready light, handle, heel rest, water window, max fill line, steam control levels, and a steam shot control panel.

Important Safety Precautions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

1. Read all instructions.
2. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
3. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
4. Use appliance only for its intended use.
5. To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
6. Always turn the iron to OFF ( ) before plugging or unplugging the iron from the electrical outlet. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
7. Do not let the cord touch hot surfaces. Let the iron cool completely before putting the iron away. Coil the cord loosely around the iron when storing.
8. Always disconnect the iron from the electrical outlet before filling the iron with water, emptying the water from the iron, and when the iron is not in use.
9. Always close the filling aperture when operating the appliance.
10. Do not operate the iron with a damaged cord or in the event the iron has been dropped or damaged or there are visible signs of damage or it is leaking. To avoid the risk of electric shock, do not disassemble the iron. Supply cord replacement and iron repairs must be conducted by a qualified serviceman or the manufacturer. Incorrect assembly might result in a risk of electric shock when the iron is used after reassembly.
11. The iron must be used and rested on a stable surface.
12. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
13. Do not leave the iron unattended while the iron is connected or on an ironing board.
14. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down—there might be hot water in the reservoir.
15. To avoid a circuit overload, do not operate an iron on the same circuit with another high-wattage appliance.
16. If an extension cord is absolutely necessary, a cord with an ampere rating equal to or greater than the maximum rating of the iron shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.

Other Consumer Safety Information
This appliance is intended for household use only. Direct steam at clothing only. Directing steam toward any other surface may damage that surface.

• Do not steam clothes that are being worn.
• Do not use the steam in the direction of people or pets.

WARNING Electrical Shock Hazard : This appliance is provided with a polarized plug (one wide blade) to reduce the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, have an electrician replace the outlet.
To avoid an electrical circuit overload, do not use another high-wattage appliance on the same circuit with this appliance.

Product Usage Instructions

Dry Ironing

1. Plug the iron into an outlet. The red power/ready indicator light will flash.
2. Turn the temperature setting dial to select the desired temperature.
3. Wait for the temperature to be reached, indicated by the light no longer flashing.
4. Move the steam shot lever to the “Dry Iron” position.
5. You are now ready to iron.
6. To turn off the iron, move the steam shot lever to the “Dry Iron” position and turn the temperature setting dial to the minimum position. Unplug the iron.

Steam Ironing

1. Fill the iron with water through the water fill door, ensuring not to exceed the max fill line.
2. Plug the iron into an outlet. The red power/ready indicator light will flash.
3. Wait for the temperature to be reached, indicated by the light no longer flashing.
4. Move the steam shot lever to the desired steam level.
5. Ensure the garment or fabric to be steamed is in a location that is not susceptible to heat or moisture damage.
6. Slowly move the iron vertically from top to bottom of the garment.
7. Always point the nozzle away from yourself and others to avoid burn hazards.
8. When finished steaming, move the steam shot lever to the “Dry Iron” position and wait until steam stops.
9. Turn the temperature setting dial to the minimum position. Unplug the iron.
10. Empty water from the iron after use.

Note: Always check the garment label for fabric composition and ironing instructions to avoid garment damage.

Parts and Features

1. Spray Nozzle
2. Water Fill Door
3. Spray Button
4. Power/Ready Light
5. Handle
6. Heel Rest
7. Water Window
8. MAX Fill Line
9. Steam Control Levels
10. Temperature Setting Dial
11. Steam Shot Lever
12. Titanium Ceramic Soleplate
13. Steam Shot

How to Dry and Steam Iron

CAUTION Burn Hazard. Attempting to steam iron on a lower temperature setting or failing to allow the iron to preheat for 2 minutes can result in hot water dripping from the soleplate.

1. To Steam Iron: Make sure iron is unplugged and the steam shot lever is at (Dry Iron) position. Lift Water Fill Door and add untreated tap water to the MAX Fill Line through the opening. If you have extremely hard water, mix 50% untreated tap water with 50% distilled or demineralized water for use in the iron. Press to snap cover closed. Plug into outlet. The red Power/Ready Indicator Light will flash. Turn Temperature Setting Dial to select temperature setting; linen/cotton, or wool should be used for steaming. When temperature is reached, the light stops flashing. The Steam Shot Lever can now be moved to (Steam Iron) position and is ready to steam.
2. To Dry Iron: Plug into outlet. The red Power/Ready Indicator Light will flash. Turn Temperature Setting Dial to select temperature setting. When the temperature is reached, the light stops flashing. Move the Steam Shot Lever to (Dry Iron) position and you are ready to iron.
3. To turn iron off : Move Steam Shot Lever to (Dry Iron)  and turn Temperature Setting Dial to min. Unplug.

How to Use Steam Shot

CAUTION Burn Hazard. Steam is hot. Avoid contact with escaping steam.
NOTES:

• To avoid garment damage, check garment label before using Steamer. The label inside the clothing should recommend fabric care instructions.

• Steaming garments will give a relaxed, not pressed, look.

• Do not use Steamer if garment label has this symbol ( ).

  1. To Steam: Make sure iron is unplugged and the Steam Shot Lever is at (Dry Iron) position. Lift Water Fill Door and add untreated tap water to the MAX Fill Line through the opening. If you have extremely hard water, mix 50% untreated tap water with 50% distilled or demineralized water for use in the iron. Press to snap cover closed. Plug into outlet. The red Power/Ready Indicator Light will flash. Turn Temperature Setting Dial to the linen/cotton setting. Only the maximum setting should be used with the Steam Shot. When the temperature is reached, the light will stop flashing. The Steam Shot Lever can now be moved to the (Steam Shot) position and it is ready to steam.

  2.  Steam garment or fabric in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, a window, or a mirror. Slowly move iron vertically from top to bottom of garment.
     CAUTION Burn Hazard. Steam is hot. Always point nozzle away from yourself and others. Never steam clothes while they are being worn.

  3. When finished steaming, move Steam Shot Lever to (Dry Iron) position and wait until steam stops.

  4. Turn Temperature Setting Dial to min. Unplug.

  5. Empty water from iron. See “Care and Cleaning” section.

PREPARE TO IRON

NOTE: To avoid garment damage, check garment label for fabric composition and ironing instructions.

Steam Setting| Temperature Setting| Ironing Instructions
---|---|---
Dry Iron| MIN| | MIN
Synthetics| •
Low| Dry iron using spray if necessary.
Silk| ••
Medium| Iron silk on wrong side.
Steam Range| Wool| Between Low and Medium| Iron wool on wrong side.
Cotton, Linen| •••
High| For cotton, iron while still damp or use spray. For linen, iron fabric on wrong side.

Tips for Best Ironing Results

FABRIC FACTS AND LABELS:
Every fabric is different and should be treated accordingly. The label inside clothing or linens should recommend fabric care instructions that include ironing treatment. As a general rule, these instructions should be followed. If the fabric is a blend, use a low temperature setting. If you do not know what the content of the fabric is, use the lowest temperature first and test on an inside seam.

PREPARE TO IRON:

1. Cover your ironing board with a padded, heat-resistant cover. Brush or wipe off any dust, dirt, or debris so it doesn’t transfer to clothing.
2. To set the height of the ironing board, stand with your elbows bent at right angles; then drop your hands slightly so that your arms are in a comfortable position. Set the height of your ironing board to this height.
3. Check the soleplate for mineral deposits or scorched material before you begin ironing. Follow “Soleplate Care” instructions.

FAST FACTS:

• Always iron with a lengthwise motion. Ironing in a circular motion may stretch fabric.
• Natural fibers such as cotton and linen should be ironed slightly damp for faster, easier ironing. If they are completely dry, use maximum steam while ironing or mist them with water prior to ironing.
• Any portion of a garment that has two layers of fabric such as pockets, seams, collars, and cuffs should be ironed inside out first.
• To press a collar, iron from the points in using small strokes of the iron. After wrinkles are removed, crease the collar into place by hand. Treat French cuffs similarly, gently creasing by hand after ironing.

IRONING VERSUS PRESSING:

• You may have heard the terms “ironing” and “pressing” used interchangeably, but they are actually quite different. When ironing, you slide the iron back and forth over fabric. When pressing, the iron is placed and held on the fabric in one spot, lifted up, and this process is repeated until the areas that need attention are smooth. A “pressing” technique is helpful to avoid stretching fabrics.
• A pressing cloth can help reduce unwanted “shine” on fabrics. You can purchase a pressing cloth in the laundry care section, or a clean white dish towel or 100% cotton pillowcase works equally well. You do not need to increase the recommended iron temperature when using a pressing cloth.

Steamer Tips

• To avoid garment damage, check garment label for fabric content and any steaming instructions.
• Hang garments on a plastic hanger for easier steaming. Wooden hangers will get damaged if used for steaming clothes.
• Allow steamed garment to cool and dry before wearing or storing in a closet.
• For more difficult wrinkles, try steaming from underside of fabric. This allows fibers in fabric to relax.
• Pants are more easily steamed upside down, with pants hanging from cuffs.

Care and Cleaning

1. Unplug. Allow iron to cool.
2. To empty water from iron, lift Water Fill Door and slowly tilt pointed end of iron over a sink until all the water has poured out.
3. Store iron on the Heel Rest. Allow iron to cool before storing.

Soleplate Care
To clean an iron’s soleplate, preheat the iron to the linen (•••) setting and iron over a damp, 100% cotton cloth. This creates heavy steam that transfers residue from the soleplate to the cloth.

NOTES:

• Care should be used while cleaning; steam can burn.
• Never iron over zippers, pins, metal rivets, or snaps since these may scratch the soleplate.
• Do not use abrasive cleansers or metal scouring pads.
• Do not use chemical cleaners or hot cleaners, as this will damage the soleplate finish.

Troubleshooting

Iron won’t heat.

• Plug iron into a working outlet.
• Select a temperature.

Water is leaking.

• Too much water is in the water tank.
• Make sure temperature dial is set in the steam zone (wool, linen/cotton).
• Wait until Power/Ready Indicator Light stops flashing, indicating that selected temperature in the steam zone has been reached. Then, move Steam Shot Lever to (Steam Iron).
• If dry ironing, make sure the Steam Shot Lever is in the (Dry Iron) position.

Iron won’t steam.

• Ensure there is water in the water tank.
• Make sure temperature dial is set in the steam zone (wool, linen/cotton).
• Wait until Power/Ready Indicator Light stops flashing, indicating that selected temperature in the steam zone has been reached. Then, move Steam Shot Lever to (Steam Iron).
• Move the Steam Shot Lever to the (Steam Iron) position.

Water spitting from Steam Shot.

• Ensure Temperature Setting Dial is set to linen/cotton (•••).
• Minor water spitting is normal during the start of steaming.

Limited Warranty

This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of two (2) years from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or any component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you. If the product or component is no longer available, we will replace with a similar one of equal or greater value. This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120 V ~ 60 Hz). We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you. To make a warranty claim, do not return this appliance to the store. Please call CHI Garment Care 1.844.882.9038 in the U.S. or visit www.chisteam.com in the U.S. For faster service, locate the model, type, and series numbers on your appliance.
Distributed by CHI® Garment Care
4421 Waterfront Drive, Glen Allen, VA 23060

References

• CHI Steam - High-performance clothing irons and steamers | Chi Steam
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>