VIZULO AP004 Micro Martin Toolless Smooth LED Street Luminaire Instruction Manual

June 13, 2024
VIZULO

VIZULO AP004 Micro Martin Toolless Smooth LED Street Luminaire Instruction

Manual

VIZULO AP004 Micro Martin Toolless Smooth LED Street
Luminaire.JPG

FIG 1 Feature.JPG

  • Depends on configuration. Check label or technical specification.

SIA VIZULO
Laucu Lejas, Iecava, Latvia, LV-3913
www.vizulo.com

Dimensions

FIG 3 Dimensions.JPG

Average Netto Weight

FIG 4 Average Netto Weight.JPG

FIG 5 Average Netto Weight.JPG

WARNING!

• Do not touch LED modules!
• Do not put any tools or other items on LED modules!
• In case any LED is physically damaged (example shown below) the warranty is void.

FIG 7.JPG

FIG 8.JPG

*The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than shown in the table above is not expected.

FIG 9.JPG

FIG 10.JPG

Standard configuration

FIG 11 Standard configuration.JPG

Configuration with terminal block

FIG 12 Configuration with terminal block.JPG

FIG 13 Configuration with terminal block.JPG

Watertight cable connector has to be ordered separately

FIG 14.JPG

Configuration without cable

FIG 15 Configuration without cable.JPG

FIG 16 Configuration without cable.JPG

ATTENTION! In case of NEMA Socket.
IP66 applies only for luminaire body and for connection between luminaire body and NEMA Socket, and do not applies to any mounted control device and connection between control device and NEMA Socket.

FIG 17 Configuration without cable.JPG

Energy efficiency class of contained light source(s)-

FIG 18 Energy efficiency class of contained light
source.JPG

MCB/Inrush current table

FIG 19 MCB Inrush current table.JPG

FIG 20 MCB Inrush current table.JPG

Terms of use and maintenance
Before luminaire is turned on, it should be mounted according with this mounting instruction or any other applicable regulations.

Mounting instructions

Mounting of luminaire must be performed by a qualified person according with following instructions:

  • The warranty of luminaire does not apply, if the mounting of luminaire has been performed in precipitation (rain, snow, hail).
  • The warranty of luminaire does not apply, if a control system unauthorized by VIZULO or an inapplicable LED driver has been used to drive the luminaire.
  • The warranty of luminaire does not apply, if it has been used in an unsuitable ambient temperature or has been supplied by voltage outside of the specified range.
  • The warranty of luminaire does not apply, if the LED driver program has been changed in any way.
  • The warranty of the luminaire does not apply, if the logged history data of the LED driver has been deleted without the permission of VlZULO.
  • The warranty of luminaire does not apply, if it has been mounted in unspecified angles or upside down (luminaire glass directed up), or it has been completely submerged under water.

Safety instructions

Any actions with the luminaire must be performed by a qualified person, who is certified according with national regulations and requirements.
To prevent any accidents person installing the luminaire must follow national safety requirements and following instructions:

• The label containing technical parameters of the luminaire has to be studied before the work on it has begun.
• Any luminaire build or design changes are prohibited.
• The luminaire must be used in good technical condition and according with this instruction.
• Only VIZULO authorized spare parts and accessories can be used to repair the luminaire.
• The repair of luminaire has to be performed by a qualified and certified person.

Maintenance and repair
Luminaire has to be disconnected from electrical grid before it is opened and/or repaired!

  • The person working with the luminaire must follow national regulations and legislations that apply to maintenance and testing of electrical or electronic appliances.
  • The luminaire may need to be cleaned depending on its environment. Only a damp cloth or a sponge may be used to clean the luminaire. Use only household detergents diluted by water.
  • Only VIZULO authorized spare parts may be used for the luminaire. Instruction for changing spare parts must be requested from VIZULO and studied before the repair is attempted.
  • LED modules, lens and LED drivers can be changed on an installed luminaire, but it is advised to perform this task indoor to avoid water entering the luminaire.
  • Spare parts (lens, LED modules and drivers) should be ordered from the information available on the luminaire label.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals