GE APPLIANCES GE RealMAX GG40T08BXR 40-Gallon Tall Natural Gas Atmospheric Water Heater Installation Guide

June 13, 2024
GE Appliances

GE APPLIANCES GE RealMAX GG40T08BXR 40-Gallon Tall Natural Gas

Atmospheric Water Heater

Product Information

The product model is GG40T08BXR.

The product dimensions and installation information are as follows

  • Local installation regulations : 20
  • Installation must comply with local codes, utility codes, utility company requirements, or the latest edition of the National Electrical Code.
  • Vertical pitch of at least 1/4 per foot is required for typical horizontal installation.
  • Thermal expansion tank, shut-off valve, hot water outlet to fixtures, unions, vent pipe to chimney, vent hood, and cold water supply are necessary for installation.
  • Power requirements should be checked on the rating plate of the water heater to ensure the power supply corresponds to the water heater requirements.
  • Location: The water heater should be placed in a clean dry area close to the area with the highest demand for heated water. Long uninsulated hot water lines can lead to energy and water wastage.
  • Required clearances: There must be sufficient clearance around the top, rear, and sides of the water heater for service access. Clear access to the controls and drain at the front of the unit is essential. Additional clearance may be needed on the opposite side of the unit for earthquake straps.
  • Minimum sediment trap catch pan, drain valve, combustion air inlets, and relief valve discharge within 6 inches of the floor (no closer than 2 times pipe diameter per local code) are required.

The product is listed by Underwriters Laboratories and certified to NSF/ANSI 372.

For specific model listing specifications, please refer to http://info.nsf.org/Certified/Lead_Content/.

Product Usage Instructions

  1. Ensure compliance with local installation regulations, codes, utility company requirements, and the National Electrical Code.
  2. Install the water heater with a vertical pitch of at least 1/4 per foot for typical horizontal installation.
  3. Connect the necessary components for installation, including the thermal expansion tank, shut-off valve, hot water outlet to fixtures, unions, vent pipe to chimney, vent hood, and cold water supply.
  4. Verify that the power supply meets the requirements specified on the rating plate of the water heater.
  5. Choose a location for the water heater that is clean, dry, and close to the area with the highest demand for heated water. Avoid long uninsulated hot water lines to minimize energy and water wastage.
  6. Ensure sufficient clearance around the top, rear, and sides of the water heater for service access. The controls and drain at the front of the unit must have clear access for operation and service. If earthquake straps are required, provide additional clearance on the opposite side of the unit.
  7. Install a minimum sediment trap catch pan, drain valve, combustion air inlets, and relief valve discharge within 6 inches of the floor (no closer than 2 times pipe diameter per local code).
  8. Refer to the product photograph for the actual appearance of the water heater.
  9. For warranty details, refer to the written warranty provided with the product.

GG40T08BXR

GE RealMAX® Choice 40-Gallon Tall Natural Gas Atmospheric Water Heater

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

LOCAL INSTALLATION REGULATIONS
This water heater must be installed in accordance with these instructions, local codes, utility codes, utility company requirements or, in the absence of local codes, the latest edition of the National Electrical Code. It is available from some local libraries or can be purchased from the National Fire Preventions Association, Batterymarch park, Quincy, MA 02169 as booklet ANSI/NFPA 70.

  • INSTALLATION INFORMATION: For complete information, see installation instruction packed with your water heater.
  • POWER REQUIREMENTS: Check the markings on the rating plate of the water heater to be certain the power supply corresponds to the water heater requirements.
  • LOCATION: Locate the water heater in a clean dry area as near as practical to the area of the greatest heated water demand. Long uninsulated hot water lines can waste energy and water.
  • REQUIRED CLEARANCES: There must be sufficient clearance between any object and the top, rear and sides
    of the water heater in the event service is needed. The controls and drain at front of unit must have clear access for operation and service. Installations that require minimal clearance on the sides or rear of the water heater for earthquake straps are also acceptable. In these cases, additional clearance should be provided on the opposite side of the unit to allow for service access.GE-APPLIANCES-GE-RealMAX-GG40T08BXR-40-Gallon-Tall-Natural-Gas-
Atmospheric-Water-Heater \(2\)

Above illustration intended for dimensional reference only. Refer to photograph for actual product appearance.

For answers to your GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

FEATURES AND BENEFITS

  • Real Capacity – Get the most hot showers from the only natural gas water heater that holds a true 40 gallons of water (Compared to 40 gallon gas steel tank water heaters per DOE rated gallon capacity).
  • Leading Performance – Live comfortably with this best in class unit that delivers up to 84 gallons of hot water in the first hour of use (Measured through DOE First Hour Rating).
  • Household Size – Provide hot water for the whole family of 2 to 4 persons.
  • Quick Recovery – Quickly replenish hot water with a max-performance 40K burner.
  • Anode Rod – Durable design offers long-lasting protection against corrosion to extend the life of your water heater tank.
  • SmartShield™ Safety System – Monitors the surrounding air and automatically shuts off the unit if abnormal temperatures are detected.
  • Self-Diagnostic – Monitors and reports on gas system status via LED status indicator.
  • Drain Valve – Rust-proof construction can be counted on to provide long-lasting service.
  • Easy Installation – Replace your old water heater quickly and easily using standard water and gas connections.
  • Built-To-Last warranty – RealMAX™ Choice water heaters carry an 8-year tank and parts limited warranty*.
  • Model GG40T08BXR – Diamond Gray

*See written warranty for full details

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

GE Appliances User Manuals

Related Manuals