AXIS COMMUNICATIONS W102 Body Worn Camera Installation Guide

: June 1, 2024
: AXIS COMMUNICATIONS

Table of Contents

AXIS COMMUNICATIONS W102 Body Worn Camera
Product Information
Usage Instructions
What’s In The Box
Using Instruction
Daily Use Guide
Legal considerations
Regulatory information
Disposal and recycling
Warranty information
Safety Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AXIS COMMUNICATIONS W102 Body Worn Camera

Product Information

The AXIS W102 Body Worn Camera is a compact and powerful camera designed for body-worn surveillance purposes. It comes with a user manual and AXIS Body Worn Manager for efficient management of recorded footage.

Specifications:

Format: A7
Installation guide: 1p
User manual: 5p
AXIS Body Worn Manager: 1x
Daily Use Guide: 5x
Legal considerations: 24p

Usage Instructions

Installation Guide:
Before installing the product, carefully read through the installation guide provided. Keep the guide for future reference. Ensure compliance with local laws regarding video and audio surveillance.

Legal Considerations: Before using the camera for surveillance, check and comply with local laws regarding video and audio surveillance.
Equipment Modifications: Follow the instructions in the user documentation strictly. Do not attempt any unauthorized modifications as it may void regulatory certifications and approvals.

FAQ:

Q: Where can I find additional support for the AXIS W102 Body Worn Camera?
A: For additional support, visit axis.com/products/axis-w102-body-worn- camera/support or refer to the user manual provided.

What’s In The Box

$AXIS-COMMUNICATIONS-W102-Body-Worn-Camera-Fig- $1$$

Using Instruction

$AXIS-COMMUNICATIONS-W102-Body-Worn-Camera-Fig- $3$$

User manual

axis.com/products/axis-w102-body-worn- camera/support

Daily Use Guide

axis.com/products/axis-w102-body-worn- camera/support

Read this first
Read through this installation guide carefully before you install the product. Keep the installation guide for future reference.

Legal considerations

Video and audio surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

This product includes the following licenses:

one (1) AAC decoder license
one (1) H.264 decoder license

To purchase further licenses, contact your reseller.

Liability
Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind about the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Intellectual property rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at axis.com/patent and one or more additional patents or pending patent applications in the US and other countries.
This product contains licensed third-party software. See the third-party license information in the product’s user interface for more information.
This product contains source code copyrighted by Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see opensource.apple.com/apsl). The source code is available from developer.apple.com/bonjour/.

Equipment modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners.

Apple, Apache, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, and WWW are registered trademarks of the respective holders. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates. The UPnP Word Mark and UPnP Logo are trademarks of Open Connectivity Foundation, Inc. in the United States or other countries.
WPA, WPA2 and Wi-Fi Protected Setup are marks of the Wi-Fi Alliance.

Regulatory information

Europe
This information applies to the AXIS W102 BODY WORN CAMERA product variant only.

This product complies with the applicable CE marking directives:

Electromagnetic Compatibility (EMC) Directive 2014/30/EU. See Electromagnetic compatibility (EMC).
Radio Equipment Directive (RED) 2014/53/EU. See Radio transmission.
Low Voltage Directive (LVD) 2014/35/EU.
Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and 2015/863, including any amendments, updates or replacements. See Disposal and recycling.

A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact information.

Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfil applicable standards for:

Radio frequency emission when installed according to the instructions and used in its intended environment.
Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.

USA
This information applies to the AXIS W102 BODY WORN CAMERA US product variant only.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The product shall be connected using a shielded network cable (STP) that is properly grounded.

Contact information

Axis Communications Inc. 300 Apollo Drive Chelmsford, MA 01824 United States of America
Tel: +1 978 614 2000

Canada

This information applies to the AXIS W102 BODY WORN CAMERA US product variant only.
This digital apparatus complies with CAN ICES-3 (Class B). The product shall be connected using a shielded network cable (STP) that is properly grounded.

Europe
This information applies to the AXIS W102 BODY WORN CAMERA product variant only.

This digital equipment fulfils the requirements for RF emission according to the Class B limit of EN 55032. The product shall be connected using a shielded network cable (STP) that is properly grounded.

Australia/New Zealand

This information applies to the AXIS W102 BODY WORN CAMERA product variant only.
This digital equipment fulfils the requirements for RF emission according to the Class B limit of AS/NZS CISPR 32. The product shall be connected using a shielded network cable (STP) that is properly grounded.

Radio transmission

This information applies to the AXIS W102 BODY WORN CAMERA product variant only.
This device may generate or use radio frequency energy. The user could lose the authority to operate this device if an unauthorized change or modification is made.
The device shall be positioned and fastened on the outside of clothing at the chest or waist belt, using an Axis fastening clip.
The transmitter operates at:

Transmitter frequency range (MHz)| Maximum peak radio frequency output power (dBm)
---|---
2402–2480| 3.231
2412–2472| 16.901
Transmitter frequency range (MHz)| Maximum peak radio frequency output power (dBm)
---|---
5150–5250| 12.811
5725–5825| 12.331

Equivalent isotropic radiated power

USA

This information applies to the AXIS W102 BODY WORN CAMERA US product variant only.
This device complies with FCC-specific absorption rate (SAR) limits for portable devices. This device is designed to be used near the body.
For body-worn operation, this device has been tested and found to comply with the FCC RF exposure guidelines when used with Axis accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
More information about exposure to radiofrequency electromagnetic fields can be obtained from Axis Communications AB.

Canada
This information applies to the AXIS W102 BODY WORN CAMERA US product variant only.

This device complies with the Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with IC-specific absorption rate (SAR) limits for portable devices. This device is designed to be used near the body.
For body-worn operation, this device has been tested and found to comply with the RSS-102 RF exposure guidelines when used with Axis accessories supplied or designated for this product. Use of other accessories may not ensure compliance with RSS-102 RF exposure guidelines.
More information about exposure to radiofrequency electromagnetic fields can be obtained from Axis Communications AB.

Europe

This information applies to the AXIS W102 BODY WORN CAMERA product variant only.
Hereby, Axis Communications AB declares that this product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Safety
This product complies with IEC/EN/UL 62368-1 ed. 3, the safety of audio/video and IT equipment for outdoor use.

Disposal and recycling

When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. By local legislation, penalties may be applicable for incorrect disposal of this waste.

Europe

This information applies to the AXIS W102 BODY WORN CAMERA product variant only.
This symbol means that the product shall not be disposed of together with household or commercial waste.

Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly. This product complies with the requirements of Directive 2011/65/EU and 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).

China
This product complies with the requirements of SJ/T 11364-2014, Marking for the restriction of hazardous substances in electrical and electronic products.

Disposal and recycling

Taiwan
Declaration of the Presence Condition of the Restricted Substances Marking.

Contact information

Axis Communications AB Gränden 1 223 69 Lund Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
axis.com

Warranty information

For information about Axis’ product warranty and thereto related information, go to axis.com/warranty.

Note
Do not replace the 3.7 V ID1058 battery during the period under which the Axis Hardware Product is covered by the Axis 3-year Limited Hardware Warranty. Replacement of the battery carried out by any other party than Axis during the warranty period voids the main item’s warranty. Contact Axis Support or your reseller for matters regarding the battery or other service-related matters.

Support
Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

download user documentation and software updates
find answers to resolved problems in the FAQ database, search by product, category, or phrase
report problems to Axis support staff by logging in to your private support area
chat with Axis support staff
visit Axis Support at axis.com/support.

Learn more!
Visit Axis learning centre axis.com/learning for useful training, webinars, tutorials and guides.

Safety Information

Hazard levels

DANGER
Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in damage to property.

Other message levels

Important
Indicates significant information which is essential for the product to function correctly.
Note
Indicates useful information which helps in getting the most out of the product.

Safety instructions

NOTICE

The Axis product shall be used in compliance with local laws and regulations.
Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to the product.
Do not use chemicals, caustic agents, or aerosol cleaners.
Use a clean cloth dampened with pure water for cleaning.
Use only accessories that comply with the technical specifications of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
Use only spare parts provided by or recommended by Axis.
Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.

Transportation

NOTICE
When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.

Battery

The Axis product uses a 3.7 V ID1058 rechargeable lithium battery as the power supply for the product.
The Axis product also uses a 3.0 V MS621T rechargeable lithium battery as the power supply for its internal real-time clock (RTC).
The 3.0 V MS621T and 3.7 V ID1058 batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME), CAS no. 110-71-4.
The 3.7 V ID1058 battery contains 1,3 Propanesultone, CAS no. 1120–71–4.

DANGER

Do not dispose of the product or batteries in a fire or a hot oven. Risk of explosion.
Do not leave the product or batteries in any high-temperature environment over 80°C (176°F).
Do not leave the product or batteries in extremely low or high-temperature surroundings, which can result in leakage of flammable liquid or gas.
Do not subject the product or batteries to low air pressure that may result in an explosion or leakage of flammable liquid or gas.

WARNING

Always charge the product using an Axis body-worn docking station or a 5.0 V USB-C power supply that meets the UL/IEC LPS or PS2 requirements. Never attempt to charge the product by any other means.
The 3.0 V MS621T battery is not designed to be replaced. Please contact Axis support or your Axis reseller for service matters.
If needed the 3.7 V ID1058 rechargeable lithium battery can be replaced using the AXIS TW1906 Battery Kit 5P.
Never expose batteries to excessive heat such as sunshine, fire or similar.
Always dispose of used batteries according to local regulations or the battery manufacturer’s instructions.

Note

Do not replace the 3.7 V ID1058 battery during the period under which the Axis Hardware Product is covered by the Axis 3-year Limited Hardware Warranty. Replacement of the battery carried out by any other party than Axis during the warranty period voids the main item’s warranty. Contact Axis Support or your reseller for matters regarding the battery or other service-related matters.

USB connector

WARNING
Use the product’s USB connector to charge the product and power AXIS TW1200 and AXIS TW1201 only. Never power any other devices using the product’s USB connector.

Installation guide