GEORGE KOVACS P5570-44B Entwined 1 Light Pendant Ceiling Light Installation Guide

GEORGE KOVACS P5570-44B Entwined 1 Light Pendant Ceiling Light

Product Information

The P5570-44B/66A and P5571-44B/66A are lighting fixtures that require installation. These fixtures come with a mounting plate,ground screw, mounting screws, and necessary wiring components.

Product Usage Instructions

Installation Preparations:

1. Before starting the installation, ensure that the power is shut off at the fuse box or circuit breaker box.
2. Remove the old fixture, including the mounting hardware.
3. Carefully unpack the new fixture and ensure that all parts are present.

Suggested Installation Steps:

3. Remove the two mounting screws (E) from the side of the canopy (D) and detach the mounting plate (B).

4. Attach the mounting plate (B) to the junction box using the provided outlet box screws (C).

5. Loosen the allen screw (H) with the allen wrench (F) provided.
   Determine the desired height for hanging wire (I), then tighten the allen screw (H).
   Connecting the Wires:

6. Refer to Fig. 2 for wire connections. Connect the fixture’s electrical wires to the corresponding house wires, making sure all wire connectors are secured.

7. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (B) using the provided green screw.\

8. Tuck the wire connections neatly into the junction box.

Completing the Installation:

1. Attach the canopy (D) to the mounting plate (B) and secure it with the mounting screws (E).
2. Install one medium base bulb (K) up to 60 watts or CFL/LED equivalent (not included) into the socket (J).

Your installation is now complete. Restore power to the junction box and test the fixture.

INSTALLATION INSTRUCTIONS

FOR P5570-44B/66A & P5571-44B/66A

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

PREPARING FOR INSTALLATION (Fig. 1)

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
   SUGGESTED INSTALLATION (Fig. 1 and Fig. 2)

3. Remove two mounting screws (E) from the side of canopy (D) and remove mounting plate (B).

4. Attach mounting plate (B) to the junction box (not included) with the two outlet box screws (C) provided.

5. Loosen allen screw (H) with allen wrench (F) provided, determine the designed height for hanging wire (1), then tighten allen screw (H) with allen wrench (F) provided.
   CONNECTING THE WIRES (Fig. 2)

6. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to mounting plate (B) using the green screw provided. Tuck the wire connections neatly into the junction box.
   COMPLETING THE INSTALLATION (Fig. 1)

7.  Attach canop (D) to mounting plate (B) and secure it with mounting screws (E).

8. Install (1) one medium base bulb (K) up to 60 watts or CFL or LED equivalent (not included to the socket (J).

Your installation is now complete. Return power to the junction box and test the fixture.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>