HAY Shelving Unit Instruction Manual
- June 13, 2024
- HAY
Table of Contents
HAY Shelving Unit
PARTS
INSTALLATION INSTRUCTION
- Slide the gliders C onto the uprights A .
- Align the shelves B with two uprights A as shown in the drawing below. Screw the uprights A onto the shelves B , using the bolts D and nuts E . Refer to the details in the drawing below concerning the recommended number of holes between each shelf.
- Align the two remaining uprights A with the shelves B . Screw the uprights A onto the side and front of the shelves B , using the bolts D and nuts E . Make sure they are not completely tightened.
- Turn the shelf over (2 persons recommended) and screw the uprights A to the back of the shelves B , using the bolts D and nuts E .
- Turn the shelf into an upright position (2 persons recommended).
- Adjust the top shelf until it is almost level with the uprights. Then tighten all bolts completely.
- As an extra precaution, screw the shelf to the wall.
- Done!
CARE & MAINTENANCE
Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your furniture.
- Please find our Care & Maintenance guide by scanning the QR code
- You can find more relevant information on Shelving Unit by scanning the QR code
- You can also find the same information here hay.dk/downloads
- Havnen 1 8700 Horsens Denmark +45 4282 0282 / [email protected]
References
Read User Manual Online (PDF format)
Loading......