HAY LBM LED Table Lamp Instruction Manual
- June 12, 2024
- HAY
Table of Contents
HAY LBM LED Table Lamp
Product Information
The LBM Table Lamp is a modern and stylish lamp designed for indoor use. It comes with an integrated LED module that emits a warm white light with a color temperature of 3000K. The LED module has a power rating of 8W and produces a brightness of 300-350 lumens. The expected lifespan of the LED module is 25,000 hours, which is equivalent to 8-10 years of general use. When the LED module reaches its end of life, the entire luminaire should be replaced. The lamp is equipped with a three-step dimmable feature and a magnetic cable management system for convenient cable placement.
Technical Data
- Fitting Type: Integrated LED
- Power: 8W
- Color Temperature: 3000K warm white
Attention
Before installing the product, ensure that the power supply to the circuit has
been turned off. In some countries, electrical installation must be done by
authorized electricians or contractors, so please check with your local
authority for guidance. The product should not be modified or tampered with.
HAY does not accept responsibility for any modified or tampered products. The
external flexible cable or cord of the luminaire cannot be replaced. If the
cord is damaged, the entire luminaire should be replaced. The replacement of
the light source should be done exclusively by a qualified electrician to
avoid electrical hazards.
Care and Maintenance
To unpack and set up the table lamp:
- Carefully unpack the lamp from its packaging. No assembly is required.
- Reposition the magnetic cable management feature on the back of the lamp according to your preference for cable placement.
- Plug the trailing cable into the power supply and attach the appropriate adapter for your region. The lamp is now ready to use.
- The lamp’s inline switch has a three-step dimmable feature. The first push sets the lamp to maximum brightness, the second push to medium brightness, the third push to the lowest brightness, and the fourth push turns the lamp off.
For detailed instructions on cleaning and caring for the lamp to prolong its life, please refer to the Care & Maintenance guide provided. You can find the guide by scanning the QR code or visiting hay.dk/downloads.
For more information about the LBM Table Lamp, you can scan the QR code or visit hay.dk/downloads.
Contact Information:
HAY
Havnen 1 8700 Horsens
Denmark
+45 4282 0282
[email protected]
www.hay.com
Date: 04/05/2022
TECHNICAL DATA
This product is supplied with an integrated LED module (3000K warm white,
300-350 lumens). The expected lifespan of the LED module is 25,000 hours,
which equates to 8-10 years of general use. When the light source reaches
its end of life, the whole luminaire should be replaced.
FITTING TYPE | Integrated LED
POWER (W) | 8 W
COLOUR TEMPERATURE | 3000K warm white
ATTENTION
Ensure that the power supply to the circuit has clearly been turned OFF before
installing the product. In some countries, electrical installation must be
carried out by authorised electricians/contractors; please check with your
local authority for guidance.
The product must not be modified in any way. HAY accepts no responsibility for
any products that have been modified or tampered with. The external flexible
cable or cord of this luminaire cannot be replaced. If the cord is damaged,
the luminaire should be replaced. The light source contained in this luminaire
should be exclusively replaced by a qualified electrician in order to avoid an
electrical hazard. This lamp is designed for indoor use only.
CARE AND MAINTENANCE
Do not use wet or damp cloths for cleaning and maintaining the shade. Please
use a dry, lint-free cloth or duster to remove any dirt. The product can be
cleaned with a soft damp cloth and mild detergent, or a dry microfibre cloth.
Do not use alcohol or any other solvents to clean the product and avoid using
abrasive or rough sponges. The external flexible cable or cord of this
luminaire cannot be replaced; if the cord is damaged, the luminaire shall be
destroyed. Ensure that the power supply has been turned OFF before cleaning
the product.
PARTS
Unpack the table lamp carefully from its packaging. There is no assembly
required for this lamp. 
Mounted on the back of the lamp is a magnetic cable management feature. This can be manually repositioned anywhere on the backside of the lamp, depending on how you would like the cable to trail away from the lamp.
Plug the trailing cable into the power supply. Attach the correct adapter for your region. The lamp is now ready to use.
The lamp’s inline switch has a three-step dimmable feature. First push sets the lamp to maximum brightness, second push to medium brightness and the third push to lowest brightness. Fourth push turns the lamp off.
CARE & MAINTENANCE
Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your lighting.
Please find our Care & Maintenance guide by scanning the QR code
You can find more relevant information on LBM Table Lamp by scanning the QR code
You can also find the same information here hay.dk/downloads
Havnen 1 8700 Horsens Denmark
+45 4282 0282 / [email protected]
www.hay.com
References
- HAY.dk – latest products, designer news and retailer info
- HAY – Danish-Inspired Furniture + Accessories for Modern Living
- HAY.dk – latest products, designer news and retailer info