HAY TURN ON Table Lamp Instruction Manual
- June 12, 2024
- HAY
Table of Contents
HAY TURN ON Table Lamp
Product Information
The product is a lamp designed by Joel Hoff. It has an integrated LED light source with a power of 4.5W and a color temperature of 2700K warm white. The expected lifespan of the LED light source is 25,000 hours, which is equivalent to 8-10 years of general use. When the light source reaches its end of life, the entire luminaire should be replaced. The product is designed for indoor use only.
Product Usage Instructions
- Unpack all the parts and make sure you have received all the parts listed.
- Twist the sphere of the lampshade clockwise onto the base of the lamp to secure the shade. Apply gentle force to prevent the glass from breaking.
- Plug the trailing cable into the power supply.
- Attach the correct adapter for your region.
- The lamp is now ready for use.
- To turn on the lamp, twist the body clockwise until it clicks. Continue twisting to reach full brightness.
- To dim the lamp, twist the body in the opposite direction. Clockwise makes it brighter, and counter-clockwise makes it dimmer.
GENERAL INFORMATION
TECHNICAL DATA
This product is supplied with an integrated LED light source. The expected
lifespan of the LED light source is 25,000 hours, which equates to 8-10 years
of general use. When the light source reaches its end of life, the whole
luminaire should be replaced.
- FITTING TYPE | Integrated LED
- POWER (W) | 4,5W
- COLOUR TEMPERATURE | 2700K warm white.
ATTENTION
- Ensure that the power supply to the circuit has clearly been turned OFF before installing the product. In some countries, electrical installation must be carried out by authorised electricians/ contractors; please check with your local authority for guidance.
- The product must not be modified in any way. HAY accepts no responsibility for any products that have been modified or tampered with. The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire should be replaced. This lamp is designed for indoor use only.
CARE AND MAINTENANCE
The product can be cleaned with a soft damp cloth and mild detergent, or a dry
microfibre cloth. Do not use alcohol or any other solvents to clean the
product and avoid using abrasive or rough sponges. Ensure that the power
supply has been turned OFF before cleaning the product.
PARTS
ASSEMBLY
- Unpack all the parts and check that you have received all the parts listed. Twist the sphere of the lampshade clockwise onto the base of the lamp to secure the shade. Only use light force to prevent the glass from breaking.
- Plug the trailing cable into the power supply. Attach the correct adapter for your region. The lamp is now ready for use.
- To operate the lamp, twist the body clockwise until it clicks to turn on. Continue twisting the lamp to reach full brightness. The lamp can be dimmed by twisting the body n the opposite direction. Clockwise makes it brighter, and counter-clockwise makes it dimmer.
CARE & MAINTENANCE
Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your lighting.
Please find our Care & Maintenance guide by scanning the QR code
You can find more relevant information on Turn On by scanning the QR code
You can also find the same information here hay.dk/downloads
Havnen 1 8700 Horsens Denmark
+45 4282 0282 / [email protected]
www.hay.com
References
- HAY.dk – latest products, designer news and retailer info
- HAY – Danish-Inspired Furniture + Accessories for Modern Living