Giada F108D Fanless Digital Signage Player User Manual

F108D User Manual

F108D Fanless Digital Signage Player

Statement
The copyright of this manual belongs to Shenzhen JIEHE Technology Development Co., Ltd.
(Giada, JIEHE’s global brand) and all rights are reserved. The company reserves the right to change this manual at any time without notification. Specifications here are for reference only, please take the real product as standard.
Without official authorization of Giada, other company or individual may not copy, plagiarize, translate or disseminate this manual for commercial purpose.
The information provided in this manual is accurate and reliable. The company does not take any legal responsibility for the consequences of infringement use of this manual.
Safety Notice

• Read the user manual carefully before setting up the Giada product.
• Disconnect the power cord before installing the internal components
• Most electronic components are sensitive to static electrical charge, please wear a wrist-grounding strap when installing the internal components.
• Don’t disconnect the power cord when the system is running to avoid damage to the sensitive components caused by instantaneous surge voltage.

Contact Information
Shenzhen JIEHE Technology Development Co., Ltd.
Website: www.giadatech.com
Phone: +86-755-3330 0336
Email: [email protected]
Address: 1~2/F, Block A, Tsinghua Information Harbor, North Section, Shenzhen Hi-tech
Park, Nanshan District, Shenzhen, China

Product Introduction

Based on Intel® Alder Lake-N platform, Giada F018D offers both fan and fanless design options. The standard version is fanless, while the picture in the manual shows the fan design. It features with dual LAN ports and dual COM ports. With one DP and two HDMI displays output, it can support 4K 60Hz display. The player is suitable to be applied in mainstream digital signage applications.

Interface Description and Hardware Specifications

2.1 Interface Description
Front I/O Port

Left I/O Port

Rear I/O Port

Right I/O port

2.2 Hardware Specifications

2 x HDMI (Max.4096 x 2160 @60Hz)
Network| Controller| 2 x Realtek RTL 81111-1 Gigabit Ethernet
Interface| 2 x RJ45 (Optional: 1 x RJ45)
WI-FUBT| 1 x E-Key M.2 (2230) for Wi-Fi/BT, Support Wi-Fi 5, Wi-Fi 6
Mobile Network| 1 x B-Key M.2 (3042) for 3G/4G
1 x SIM Slot
I/O Interface| USB| 2 x USB3.2 Gent, 4 x USB2.0
Serial Port| 2 x RS232
Audio| 1 x MIC-IN, 1 x AUDIO-OUT
Button| 1 x Power on, 1 x CLR-CMOS
Antenna| 2 x Connector for Wi-Fi/BT
Storage| M.2 (2280)| 1 x M-Key M.2 (2280) for PCIe3.0 X4 SSD
JAHC| JAHC| Watchdog Timer / Auto Power On / RTC
Operation System| OS| Windows 11 (64bit) Linux Ubuntu (64bit)
Power| Power Type| DC-IN
Input Voltage| 19 V/2.37 A
Mechanical| Construction| Metal
Mounting| VESA Mounting Kit (JZ183)
Dimension (W x D x H)| 189.6mm x 148.3mm x 26mm (7.46″ x 5.83″ x 1.02″)
Color| Black
Environment| Operating Temperature| 0°C -45°C (32°F-113°F) @0.7m/s Air Flow
Relative Humidity| 95%@40 t (non-condensing)
Certification|  | CE, FCC Class B, UKCA

Accessories Installation Steps

** For safety reasons, please ensure that the power cord is disconnected before opening the case.
How to open the top cover and bottom cover**
Unscrew the four screws and open the top case. (1 x M-Key M.2 (2280) for SSD, 1 x B-Key M.2 (3042) for 3G/4G, 1 x SIM Slot, 1 x E-Key M.2 (2230) for Wi- Fi/BT are on top side).
Unscrew the four screws, push the bottom cover and remove it. (1 x SO-DIMM DDR4 is on bottom side).

3.1 Memory Installation
**** This product only supports DDR4 SO-DIMM memory modules.

1. Locate the SO-DIMM slot on the board.
2. Gently insert the module into the slot at a 45-degree angle.
3. Carefully push down the memory module until it snaps into the locking mechanism.

3.2 SIM Card Installation
**** This product supports standard SIM card with the size of 25mm × 15mm.

1. [Open] the SIM card holder and pull it up.
2. Insert the SIM card.
3. [Lock] the card holder.

3.3 3G/4G Installation

• 3G/4G Installation

**** Default external antennas are for WIFI. Please change one external antenna for 3G/4G.

1. Plug the 3G/4G module into the M.2 slot.
2. Secure the module to the standoff screw by tightening up the screw.
3. Connect the cable to Main and install the antenna.

3.4 SSD (M.2) Installation

1.  Plug the SSD (M.2) into the appropriate slot.
2. Secure the module to the carrier by tightening up the screw.

3.5 WIFI (M.2) Installation

1. Plug the WIFI module into the appropriate slot.
2. Secure the module to the carrier by tightening up the screw.
3. Connect the two cables to WIFI module and install the antennas.

BIOS Setup

Notice:
The descriptions relating to BIOS setup in this Manual is for reference only when the BIOS version of the product might be upgraded. Giada provides no guarantee that all the contents in this Manual are consistent with the information you acquired.
BIOS is a basic I/O control program saved in the Flash Memory. Bridging the motherboard and the operation system, BIOS is used for managing the setup of the related parameters between them.
When the computer is activated, the system is first controlled by the BIOS program. Firstly, a self-detection called POST is performed to check all hard devices and confirm the parameters of the synchronous hardware.
Once all detections are completed, BIOS will hand over the controlling to the operation system (OS).
As BIOS serves as the only channel that connects the hardware and software, whether your computer can run stably and work in optimized state will hinge on how to properly set the parameters in BIOS.
Therefore, the correct setup of BIOS plays a key role for stably running the system and optimizing its performance.
The CMOS Setup will save the set parameters in the built-in CMOS SRAM on the motherboard.
When the power is shut off, the lithium battery on the motherboard will provide continuously power to CMOS SRAM.
The BIOS setup program will allow you to configure the following items:

1. HD drive and peripheral devices
2. Video display type and display items
3. Password protection
4. Power management characteristics

A. State of BIOS Setup
When the computer is started up, BIOS will run the self-detection (Post) program. This program includes series of diagnosis fixed in BIOS. When this program is executed, the following information will appear if any error is found:
Press [F1] to Run General help
Press [F2] to Load previous values and continue
To enter BIOS, you can press F2 to load the default values and enter the system, you can press DEL to enter the BIOS interface if no error is found. If the indicative information disappears before you operate, you can shut off the computer and turn it on again, or you can press the RESET key on the product case. To restart your computer, you can also simultaneously press < Ctrl > +

B. Function Keys definitions

C. Auxiliary information on Main interface
When the system enters the main interface of Setup, the major selected contents will be displayed at the lower part of the interface with the change of the options.
When you set the value for each column, you can view the preset value of the column and the values that can be set if you press F2, for example, the BIOS default values or CMOS Setup values.
To exit the interface for auxiliary information, press [ESC].

1. Main menu
   When the system enters the CMOS Setup menu, you can see the main menu on the upper part of the screen, as shown in Figure 1.
   In this main menu, you can use the left and right direction keys to select the setup items.
   Once the item is selected, the lower part of the computer screen will show the details of setting.

1. Main (standard CMOS setup)
   This item is used for setting the date and time.

2. Advanced (advanced BIOS setup)
   This item is used for setting the advanced functions provided by BIOS, such as specifications of PCIe facilities, CPU, HDD, etc.

3. Security (set the administrator/user password)

4. Boot (startup configuration characteristics)

5. Save & Exit (option of exit)
   This item includes load optimal defaults /load failsafe defaults value/discard changes/discard changes and exit.

6. MEBx

4.1 Main (Standard CMOS setting)

1. System time (hh:mm:ss)
   Use this item to set the time for the computer, with the format as “HH / MM / SS”.

2. System date (mm:dd:yy)
   Use this item to set the date for the computer, with the format as “week, MM / DD / YY”.

4.2 Advanced (Advanced BIOS setup)

4.2.1 ACPI Setting

hibernation
Suspend Disabled: Disable system Suspend.
♦ S3 (Suspend to RAM): Enable S3(Suspend to RAM)
State After G3| ♦ State After G3 means after restore power supply.
♦ S5 State (Default): If set it as S5 State, it means the system will remain shutdown state
♦ S0 State: If set it as S0 State, it means the system will be power on automatically.
JAHC Enable| JIEHE Active Hardware Control (JAHC) management system includes both hardware Micro
Control Unit (MCU) and software (JAHC Technology Manager).
♦Disabled: The JAHC is disable by default.
♦ Enabled.

4.2.2 CPU Configuration

CPU Configuration
Boot performance mode| ♦ Max Non-Turbo Performance: the best performance.
♦ Max Battery.
♦Turbo performance.
Intel (VMX) Virtualization Technology| Intel Virtualization Technology is enabled by default. User can
enable and disable the Intel Virtualization Technology function.
Intel（R） Speed Step（tm）| Intel（R） Speed Step Technology dynamically increases the processor’s frequency as needed by taking advantage of thermal and power headroom to give you a burst of speed when you need it, or increased energy efficiency.The option is enabled by default. You can disable the function if it’s necessary.
Race To Halt（RTH）| The Race To Halt（RTH） function is enable by default. It can adjust the CPU base frequency work in C-state.
Optional: C-state.
Intel（R）Speed Shift Technology| Intel speed shift function is enabled by default. Intel® Speed Shift
Technology uses hardware-controlled P-states to deliver dramatically quicker responsiveness with single-threaded, transient (short duration) workloads, such as web browsing, by allowing the processor to more quickly select its best operating frequency and voltage for optimal performance and power efficiency.
C states| The C-State function is disabled by default.
Turbo Mode| ♦Disabled.
♦Enabled.

4.2.3 Wake Configuration

WAKE Configuration
Wake Up On RLT LAN| Wake On LAN Function.
♦ Disabled: The WOL is disabled by default.
♦ Enabled.
Wake up By USB KB/MS| ♦ Enabled/Disabled Wake Up by USB KB/Mouse from S3 Status.
Wake system from S5| ♦ Disabled: By default, the functions is disabled.
♦ Fixed Time: You can use the fixed Time menu to modify the wake time.
♦ Dynamic Time: You can set multithreaded to wake system from S5 after enabling Dynamic Time.

4.2.4 Trusted Computing

♦Enabled. This item is enabled by default.
SHA256 PCR Bank| ♦Disabled. This item is Enabled by default
♦Enabled.
SHA384 PCR Bank| ♦ Disabled This item is Disabled by default.
♦  Enabled.
SM3_256 PCR Bank| ♦Disabled This item is Disabled by default.
♦Enabled.
Pending operation| ♦ It includes None and TPM Clear function.
Platform Hierarchy| ♦  Disable or Enable the Platform Hierarchy.
Storage Hierarchy| ♦ Disable or Enable the Storage Hierarchy.
Endorsement Hierarchy| ♦Disable or Enable the Endorsement Hierarchy.
Physical Presence Spec Version| ♦ You can choose 1.2 or 1.3. The version is 1.3 by default.
TPM 20 Interface Type| ♦ PM2.0 Interface Type is CRB by default.
Device Select| ♦ You can select TPM1.2 or TPM2.0 or Auto. Auto is set up by default.

4.2.5 HW Monitor & Smart fan

Pc Health Status
**Smart Fan 2 Mode**| It includes “Automatic mode” and “software mode”.
♦ Automatic mode. Automatic mode is enabled by default.
♦Software mode.

Fan off temperature limit

| ♦ FAN will stop work If temperature is lower than the Fan off temperature limit value.
**Fan start temperature limit**| ♦ If the temperature is higher than fan off temperature limit, FAN will start work.

Fan Full Speed Temp limit

| ♦ If the temperature is higher than the FAN Full Speed temp limit value, the FAN will work at full speed.
**Fan start PWM| ♦ If the temperature is higher than the FAN start PWM value, the FAN will start work.
****PWM slope setting**| ♦ 0.125 PWM
♦ 0.25 PWM
♦0.5 PWM
♦ 1 PWM
♦ 2 PWM
♦ 4 PWM
♦ 8 PWM
♦ 15.875 PWM

4.2.6 System Devices Configuration

♦ Enabled
♦Disabled.
SATA Mode Selection| ♦Determines how SATA controller(s) operate.
HD Audio| ♦Control Detection of the HD-Audio device.
♦HAD will be unconditionally disabled when disabled.
l HAD will be unconditionally Enabled when Enabled.
Network Stack| The Network Stack is disabled by default.
♦Enabled
♦Disabled.

4.3 Security Setup (set the administrator/user password)

If this function is selected, the following information will appear:
Enter New Password hhhhhh
Then enter a password which is no more than eight characters and press