GIADA SYSTEM GSW-LTE Smart Light Driver User Manual
- June 1, 2024
- GIADA SYSTEM
Table of Contents
GIADA SYSTEM GSW-LTE Smart Light Driver
FEATURES
- Domestic and industrial smart light driver
- Manage lamps, rooms, colors and scenarios with GIADA app
- Operating with a reliable mesh network for a wider coverage
- Upgradable software through GIADA app
- Easy integration and setup
Find out latest news, availability of new products and more on GIADA SYSTEM.
HOW TO SETUP
- Install GIADA device according to the instructions in the HOW TO WIRE section.
- Install GIADA official app available for Android and iOS (see link below), then go to HOW TO CONNECT section to reach your new GIADA device.
- Configure the device: see the HOW TO CONFIGURE & MANAGE section to discover all the function to manage your lamp.
- Turn on the light!
HOW TO CONNECT
- Connect your Android or iOS device to the Wi-Fi network chosen for your lamps.
- Make sure your GIADA device is powered on and that is less than five meters away, then start GIADA app. Your new device will be automatically recognized and added to the available lights: just tap on Configure and insert your network password when prompted.
- If correctly added, your lamp will appear in your lights menu. Change the lamp default name tapping on settings button, select the lamp and input the desired name.
HOW TO CONFIGURE & MANAGE
- Create a room to manage a group of lamps: settings, add room
- Add a lamp to a room: settings, select lamp, assign a room and select the desired room.
- Manage a room: tap on your lights and select the desired room.
- Tune brightness and color of your lamps!
- GIADA app will inform when device updates are available.
the options actually available depend on the model.
HOW TO WIRE
Pin description
- DC IN (1,2) DC power input
- OUT1 (3,4) Output 1
- PUSH (5,6) Button input (WA)
- OUT2 (7,8) * Output 2
- OUT3 (9,10) * Output 3
WARNINGS:
- Only qualified personnel should make the connections.
- Use only wire of proper section for both input and output.
- Use suitable power supply according to voltage and power requirements of the load(s).
- Choose a SELV power supply to obtain a SELV system.
- Make sure to connect input and output correctly.
- The PUSH input can be used with a NO (normally open) push button. Keep wire length as short as possible and do not exceed 5 meters in length.
- Use suitable load.
- In order to prevent damage and to maintain product reliability ensure proper aeration and keep the device away from heat sources.
TWO CHANNELS DEVICES
THREE CHANNELS DEVICES
ELECTRICAL DATA
Input
- Supply voltage DC 12 ÷ 48 V
- Max. supply current 6,2 A
- Standby power (@24V) < 0,3 W
- Efficiency > 90%
Output
- Type Voltage controlled
- Channels 1 to 3
- Max. current per channel 6 A / number of channels
Radio data
- Wi-Fi frequency 2,4 GHz – no band steering (*)
- Wi-Fi standard 802.11 b/g/n
- Wi-Fi security WEP, WPA, WPA2
- Wi-Fi max. output power +20 dBm
- Bt operating band 2,402 – 2,481 GHz
- Bt maximum output power +9 dBm
System data
- Max. network devices 100
- Devices max. distance 10 m
- Operating temp (Ta) -20 ÷ +45 °C
DEVICE OS REQUIREMENTS
- iPhone/iPad iOS 13.0 or later
- Apple watch WatchOS 6.0 or later
- Android 8.0 or later
MECHANICAL DATA
Mechanical data
- Dimensions LxWxH 48,0 x 48,0 x 19,7 mm
- Weight 31 g
- International Protection IP20
Wiring data
- Wire section 0,75 ÷ 1,5 mm2
- Wire strip length 6 mm
- Connector max tightening torque 0,6 Nm
GIADA SYSTEM – www.giada-system.com – models GSW-LTE* user manual UM-LTE-DxC-LOW_VOLTAGE-VOLTAGE_CONTROLLED-A4
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>