Giada F106D – 4K Jasper Lake Fanless Digital Signage Media Player User Manual

F106D – 4K Jasper Lake Fanless Digital Signage Media Player
User Manual

F106D – 4K Jasper Lake Fanless Digital Signage Media Player

Statement
The copyright of this manual belongs to Shenzhen JEHE Technology Development Co., Ltd.
(Giada, JEHE’s global brand) and all rights are reserved. The company reserves the right to change this manual at any time without notification. Specifications here are for  reference only, please take the real product as standard.
Without official authorization of Giada, other companies or individuals may not copy, plagiarize, translate, or disseminate this manual for commercial purpose.
The information provided in this manual is accurate and reliable. The company does not take any legal responsibility for the consequences of infringement use of this manual.
Safety Notice

• Read the user manual carefully before setting up the Giada product.
• Disconnect the power cord before installing the internal components
• Most electronic components are sensitive to static electrical charge, please wear a wrist-grounding strap when installing the internal components.
• Do not disconnect the power cord when the system is running to avoid damage to the sensitive components by instantaneous surge voltage.

Contact Information
Shenzhen JEHE Technology Development Co., Ltd.
Website: www.giadatech.com
Phone: +86-755-3330 0336
Email: support@giadatech.com
Address: 1~3/F, Block A, Tsinghua Information Harbor, North Section, Shenzhen Hi-tech
Park, Nanshan District, Shenzhen, China

Product Introduction

Based on Jasper Lake platform, Giada F106D has both fan and fanless design options. Giada F106D adopts LPDDR4 dual-channel memory as well as M.2 and mSATA  storage interface design. With one DP and one HDMI displays output, it can support 4K 60Hz display. The player is suitable to be applied in mainstream digital signage  applications.

Interface Description and Hardware Specifications

2.1 Interface Description

2.2 Hardware Specifications

F106D| | |
---|---|---|---
Processor| CPU| Inter Jasper Lake Celeron N5095(Fan)/N5100 (Fanless)
BIOS| AMI EFI 64 Mbit
Chipset| SoC
Memory| Type| LPDDR4-2666MHz
Socket| Onboard
Channel| 2
Size| 4GB (Optional: 8GB)
Graphics| GPU| Intel` UHD Graphics
Graphic Engine| DirectX 12.1, OpenGL 3.0. OpenCL 1.1, OpenGL ES 2.0. H.264, MEPG2
Interface| 1 x OP (Max.3840 x 2160 Q60Hz)
1 x HDMI (Max.4096 x 2160 /160Hz)
Network| Controller| RTL 8111I-1 Gigabit Ethernet
---|---|---
Interface| 1 x RJ45 (Optional: 2 x RJ45)
110 Interface| USB| 2 x USB3.2 Gen2. 4 x USB2.0
Serial Port| 1 x RS232
Audio| 1 x MIC-IN. 1 x AUDIO-OUT
Wireless| 1 x E-key M.2 (2230) for WiFi/BT
SIM Card| 1 x SIM-Slot
JAHC| WatchDog Timer| 0-255 Second Time Out Support
Auto Power On| Power Activated Automatically Start
RTC| Set Up Independently Every Day
Remote Control| Wake on LAN
Storage| Socket 1| 1 x M-key M.2 (224212280) for SSD
Socket 2| 1 x Full-size Mini-PCIe for MSATA 3G/4G
Onboard| eMMC 5.1 (optional)
Operation System| Windows| Windows 10 (64-bit )
Linux| Ubuntu 18.04
Power| Power Type| DC-IN
Power Adapter| 12V/19V
Mechanical| Construction| Metal
Mounting| VESA Mounting JZ183
Dimension (Wx D x H)| 189.6mm x 148.3mm x 26mm (7.46″ x 5.83″ x 1.07)
Color| Black
Environment| Operating Temperature| 0-40-0 ( 32°F- 104°F) at 0.7m/s Air Flow
Relative Humidity| 95%©40C (non-condensing)
Certification| | CE. FCC

Accessories Installation Steps

**For safety reasons, please ensure that the power cord is disconnected before opening the case.
How to open the cover**
Unscrew the four screws and push to open the case. (1 x M.2 for SSD are on top side).
Unscrew the four screws, push the bottom cover and remove it. (1 x Mini-PCIe for 3G/4G or mSATA, 1 x M.2 (2230) for WiFi/BT, SIM card slot are on bottom side).

3.2 WIFI (M.2) Installation

1. Plug the WIFI module into the appropriate slot.
2. Secure the module to the carrier by tightening up the screw.
3. Connect the two black cables to Main and AUX. Install antennas.
   

3.3 3G/4G/ Installation
Default SMA connector and cable is for WIFI. Please change to 3G/4G/5G SMA connector and cable.

1. Plug the 3G/4G module into the Mini-PCIe slot.
2. Secure the module to the carrier by tightening up the screw.
3. Connect the cable to Main and install the antenna.

3.6 SIM Card Installation
****This product supports standard SIM card with the size of 25mm × 15mm.

1. [Open] the SIM card holder and pull it up.
2. Insert the SIM card.
3. [Lock] the card holder.

Bios Setup

Notice:
The descriptions relating to BIOS setup in this Manual is for reference only since the BIOS version of the product might be upgraded. Giada provides no guarantee that all  the contents in this Manual are consistent with the information you acquired.
BIOS is a basic I/O control program saved in the Flash Memory. Bridging the motherboard and the operation system, BIOS is used for managing the setup of the related  parameters between them.
When the computer is activated, the system is first controlled by the BIOS program. Firstly, a self-detection called POST is performed to check all hard devices and confirm  the parameters of the synchronous hardware.
Once all detections are completed, BIOS will hand over the controlling to the operation system (OS).
As BIOS serves as the only channel that connects the hardware and software, whether your computer can run stably and work in optimized state will hinge on how to  properly set the parameters in BIOS.
Therefore, the correct setup of BIOS plays a key role in stably running the system and optimizing its performance.
The CMOS Setup will save the set parameters in the built-in CMOS SRAM on the motherboard.
When the power is shut off, the lithium battery on the motherboard will provide continuously power to CMOS SRAM.

The BIOS setup program will allow you to configure the following items:

1. HD drive and peripheral devices
2. Video display type and display items
3. Password protection
4. Power management characteristics

A. State of BIOS Setup
When the computer is started up, BIOS will run the self-detection (Post) program. This program includes series of diagnosis fixed in BIOS. When this program is executed,  the following information will appear if any error is found:
Press [F1] to Run General help
Press [F2] to Load previous values and continue
To enter BIOS, you can press F2; to load the default values and enter the system, you can press DEL to enter the BIOS interface if no error is found. If the indicative  information disappears before you operate, you can shut off the computer and turn it on again, or you can press the RESET key on the product case. To restart your  computer, you can also simultaneously press < Ctrl > + < Alt > + < Delete >.

B. Function Keys definitions

C. Auxiliary information Main interface
When the system enters the main interface of Setup, the major selected contents will be displayed at the lower part of the interface with the change of the options.
When you set the value for each column, you can view the preset value of the column and the values that can be set if you press F2, for example, the BIOS default values or  CMOS Setup values.
To exit the interface for auxiliary information, press [ESC].

1. Main menu
   When the system enters the CMOS Setup menu, you can see the main menu on the upper part of the screen, as shown in Figure1.
   In this main menu, you can use the left and right direction keys to select the setup items.
   Once the item is selected, the lower part of the computer screen will show the details of setting.

2. Main (standard CMOS setup)
   This item is used for setting the date and time.

3. Advanced (advanced BIOS setup)
   This item is used for setting the advanced functions provided by BIOS, such as specifications of PCIe facilities,CPU, HDD, etc.

4. Chipset

5. Security (set the administrator/user password)

6. Boot (startup configuration characteristics)

7. Save & Exit (option of exit)
   This item includes load optimal defaults/load failsafe defaults value/discard changes/discard changes and exit.

4.1 Main (Standard CMOS setting)

1. System time (hh:mm:ss)
   Use this item to set the time for the computer, with the format as “HH / MM / SS”.

2. System date (mm:dd:yy)
   Use this item to set the date for the computer, with the format as “week, MM / DD / YY”.

4.2 Advanced (Advanced BIOS setup)

4.2.1 ACPI Setting

when the SUSPEND button is pressed.
Enable Hibernation| • Enables or disables system ability to Hibernate (OS/S4 Sleep). This option may be not effective  with some OS.
State After G3| • State After G3 means after restore power supply.
• S5 State (Default): If set it as S5 State, it means the system will remain shutdown state
• S0 State: If set it as S0 State, it means the system will be power on automatically.
• Last State: If set it as Last State, it means the system will keep State of last setup.
Resume On RTC| • Enable or disable System wake on alarm event. Select FixedTime, system will wake on the  hr::min::sec specified. Select DynamicTime,System will wake on the current time + Increase minute(s).

Wake Configuration

Status.
• Disabled: The wake on USB is disabled by default.
• Enabled.
Wake Up On LAN| Wake On LAN Function.
• Disabled: The WOL is disabled by default.
• Enabled.

4.2.2 CPU Configuration

l Max Battery.
l Turbo performance.
Intel (VMX) Virtualization
Technology| Intel Virtualization Technology is enabled by default. User can enable and disable the Intel  Virtualization Technology function.
Intel（R） SpeedStep（tm）| Intel（R） SpeedStep Technology dynamically increases the processor’s frequency as needed by  taking advantage of thermal and power headroom to give you a burst of speed when you need it, or  increased energy efficiency. The option is enabled by default. You can disable the function if it’s
necessary.
Race To Halt（RTH）| The Race To Halt（RTH） function is enable by default. It can adjust the CPU base frequency  work in C-state.
Optional: C-state.
CPU Configuration Menu| Description
---|---
Intel（R）Speed Shift Technology| Intel speed shift function is enabled by default. Intel® Speed Shift Technology uses hardware-controlled  P-states to deliver dramatically quicker responsiveness with single-threaded, transient (short  duration) workloads, such as web browsing, by allowing the processor to more quickly select its best  operating frequency and voltage for optimal performance and power efficiency.
C states| The C-State function is disabled by default.
Turbo Mode| • Disabled.
• Enabled.

4.2.3 Trusted Computing

device. OS will
not show security device. TCG EFI protocol and INT1A
interface will not be available.
SHA-1 PCR Bank| l Enabled/Disabled SHA-1 PCR Bank
SHA256 PCR Bank| l Enabled/Disabled SHA256 PCR Bank
Pending operation| l Schedule an operation for the security device. Note: Your
computer will reboot during restart in order to change State of
security device.
Platform Hierarchy| l The user can enable or disable this item.
Storage Hierarchy| l The user can enable or disable this item.
Endorsement Hierarchy| l The user can enable or disable this item.
TPM2.0 UEFI spec version| Select the TCG2 SPEC version support.
l TCG_1_2: The compatible mode for win8/win8.
l TCG_2: Support new TCG2 protocol and event format for win10 or later.

4.2.4 Hardware Monitor

4.2.5 Serial Port 1 Configuration

after entering the
Serial Port 1 Configuration. It can be set according to user’s
needs.
Serial Port 1 Configuration
Serial Port| The serial port is enabled by default.
l Enabled
l Disabled.
Device Settings| IO-3F8h; IRQ=4;
Change settings| User can set the serial port by change settings option.
l Auto
l IO=3E8H；IRQ=4；
l IO=3F8H；IRQ=3，4，5，6，7，9，10，11，12；
l IO=2F8H；IRQ=3，4，5，6，7，9，10，11，12；
l IO=3E8H；IRQ=3，4，5，6，7，9，10，11，12；
l IO=2E8H；IRQ=3，4，5，6，7，9，10，11，12。

4.2.6 OEM Configuration

l Disabled: The JAHC is disable by default.
l Enabled.

4.2.7 OEM ME Configuration

When disabled ME will be put into ME Temporarily disabled Mode.

4.2.8 System Devices Configuration

4.3 Security

If this function is selected, the following information will appear:
Enter New Password hhhhhh
Then enter a password which is no more than eight characters and press