The Big Dig 109 Big Dig and Roll Ride-On Working Excavator Instruction Manual
- June 13, 2024
- The Big Dig
Table of Contents
The Big Dig 109 Big Dig and Roll Ride-On Working Excavator
Included Hardware
-
Seat Assembly
-
Base Assembly
Boom Assembly
CAUTION: Inspect for damage and missing parts before and after use. If damaged, do not use. Product is designed and intended for use by one child at a time only. Parental supervision is recommended to prevent other child/person from getting too close while The Big Dig® is in use. Max weight of child using The Big Dig® must not exceed 110 lbs.
FOR BEST RESULTS : The Big Dig & Roll® works best on level ground in
sand, dirt or grass.
CAUTION: Skill is required to avoid falls or collisions causing injury to
the user or third parties.
BOOM ASSEMBLY
Slide both pieces together and screw into place with washers as illustrated below. Then, tighten the hex nut onto the end of the screw.
TOP VIEW
Turn The Big Dig & Roll® upside down and slide the seat onto the metal plate, making sure the plate is inside the grooves on the underside of the seat.
Tools Required:
- Screwdriver
- Wrench
Weight limit: 110 Ibs
WARNING:
CHOKING HAZARD – Small parts.
Not for children under 3 years.
WARNING:
ADULT ASSEMBLY REQUIRED.
Unassembled toy contains parts that may have sharp points and sharp edges.
Keep away from children under 8 years until fully assembled.
CAUTION:
ADULT SUPERVISION RECOMMENDED.
As always read instructions before use.
Place The Dig & Roll® right side up and enjoy digging!
How to operate
Always keep both hands on the handle grips. Never operate without enough clearance. Do not operate around pets.
Storage & Maintenance
Keep stored away from stairs or paths. Wash clean with damp cloth.
Reeves International, Inc.
14 Industrial Road
Pequannock, NJ 07440 U.S.A.
©2022 by Reeves International, Inc.
Made and printed in China.
