BROILMASTER SKSS2 Stainless Steel Side Shelf Instruction Manual
- June 13, 2024
- Broilmaster
Table of Contents
BROILMASTER SKSS2 Stainless Steel Side Shelf
IMPORTANT INFORMATION
Thank you for choosing a Broil master Premium Gas Grill. This shelf kit has
been designed to fit perfectly and function flawlessly – to provide years of
service.
Please read the entire manual and compare the parts list to the parts provided
with this kit before you begin the installation. If this shelf kit is missing
any parts, contact your Broilmaster dealer. Keep this manual in a safe place
to help you identify and order repair parts if they are ever required.
This manual covers the SKSS2 stationary shelf and the SKFPB2 and SKFB2 folding
shelves. Refer to the illustration for your shelf, and follow the instructions
carefully.
NOTE: These side shelves are designed to support approximately 25 pounds.
Exceeding this weight limit may cause damage and void the warranty.
CAUTION: Parts may have sharp edges. Wear leather work gloves and handle
parts carefully.
To order repair parts, contact your Broilmaster dealer. See the dealer locator
at www.broilmaster.com. When ordering parts, please have the following
information available: Grill Model Number, Shelf Model Number, Part Number and
Description, and Quantity or Parts needed.
Tools Required
- Phillips Screwdriver
- 7/16-inch Socket and Ratchet or 7/16-inch Nut Driver
STATIONARY SIDE SHELF INSTALLATION
Stainless Steel Side Shelf
- Remove the cooking grids, briquets and briquet rack from the grill.
- Attach the Handle Shelf Bracket to the grill using the Hex Head Bolts, Flat Washers, Lock Washers, and Nuts. Do not over-tighten.
- Place the Tool Hook Bar inside the Shelf and place the Shelf on the Bracket, aligning the screw hole. Insert the Truss Head Screw and tighten. See Figure 1.
| Index No. | Part No. | Description |
|---|---|---|
| 1 | B076727 | SIDE SHELF |
| 2 | B073971 | TOOL HOOK |
| 3 | B101405 | HANDLE SHELF BRACKET |
| B100002 | HARDWARE PACKAGE |
DROP-DOWN SIDE SHELF INSTALLATION
All repair part orders should be placed through your local Broilmaster® dealer. To locate a dealer in your area, contact Broilmaster Customer Service• www.broilmaster.com. To ensure prompt and accurate service, please provide the following information when placing a repair part order: Model Number of your grill, Part Name, Part Number, and Quantity of parts needed.
DROP-DOWN SIDE SHELF INSTALLATION
Solid Surface Drop-Down Side Shelf
- Remove the cooking grids, briquets, and briquet rack from the grill.
- Attach the Bracket Attach Assembly to the grill using the Truss Head Screws, Flat Washers, Lock Washers, and Nuts. See Figure 1. Note: Ensure that the Bracket Attach Assembly is installed so that the match light access hole is on the bottom.
- Place the Side Shelf upside down on a clean surface and use the four coarse-thread screws to loosely attach the Support Brackets.
- Place the support stiffener on the inside of the shelf using (2) #10-16×1/2″ screws to secure it in place.
- Hang the shelf brackets on the lower pins of the Bracket attachment assembly. Tighten the four screws to secure the bracket arms to the shelf.
- To raise the shelf – swing it out and lift the notches over the upper pins. Make sure the shelf is securely in position before placing anything on it.
- To lower the shelf – lift up on both brackets simultaneously and pull out slightly.
BROILMASTER®
- A Division of Empire Comfort Systems, Inc. 918 Freeburg Ave.
- Belleville, Illinois 62220
- V1s1T ouR WEB SITE AT www.broilmaster.com
- If you have a general question about our products, please e-mail us at info@empirecomfort.com. If you have a service or repair question, please get in touch with your dealer.
B101559-3-0611
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>