Custo1 Smart Parcel Box User Manual
- June 13, 2024
- CUSTO
Table of Contents
Custo Smart Parcel Box
Quick Guide
-
Download the app via the following QR code!
-
Create your account in the app and validate your account via email
-
Go back to the app and choose “Get started”.
-
Accept the privacy statement and scan the QR code in the box.
-
Enter all your details.
-
Insert the battery into the socket and wait 90 seconds to start up.
Attention: The screen will flicker a few times during this process. -
Your badge can now open your Custo® by holding it in front of the logo.
-
Done, your app is now linked to your Custo®.
Have fun! -
Now fix the lock on the door. You can find this in the packaging. (underneath the red sticker).
Note: don’t do this earlier! -
Your badge can now open your Custo® by holding it in front of the logo.
-
Done, your app is now linked to your Custo®. Have fun!
Hardware installation
- Optional: Dig a hole of 50cm x 50cm x 20cm. (length x width x depth) Only to be executed if you want to obtain a floating effect
- Level the surface with stabilized or poured concrete with a thickness of at least 5 cm. (must be level!) If you place a tile, it is best to reinforce it by applying cement along the side, so that the bus is firmly anchored in the ground. After drying, place your Custo® on the base and mark the 4 holes on the concrete. Drill the 4 holes and insert plugs. Sizes: plugs 12 x 60mm, bolts M8 x 50mm.
- Place your Custo® in the right place and screw the bolts into the base. Don’t forget the roundels!
- Close the pit with earth pebbles.
Aftersales
If you have questions about your Custo don’t hesitate to contact us at:
service@custo.io 0032 9 274 95
Custo® is a product in constant development.
If you have feedback or want to share new ideas, please let us know at:
feedback@custo.io
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>