PHILIPS MyCreation BA-L BA-S Series Dome Functional Pendants Instructions

: June 13, 2024
: Philips

Table of Contents

MyCreation BA-L BA-S Series Dome Functional Pendants
Inrush current
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

My CREATION
Dome
(BA-L BA-S series)
49S – 80S

MyCreation BA-L BA-S Series Dome Functional Pendants

PHILIPS MyCreation BA L BA S Series Dome Functional
Pendants PHILIPS MyCreation BA L BA S
Series Dome Functional Pendants - Symbol 1

Pendant track-mounted (BA-L T & BA-S T)

PHILIPS MyCreation BA L BA S Series Dome Functional Pendants -
Assembly PHILIPS MyCreation BA
L BA S Series Dome Functional Pendants - Assembly 2

Inrush current

The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
This luminaire is not suitable for use as emergency lighting.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Clean with dry cloth.
For the FMT version the luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 1.6 m is not expected.

ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES

Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors.
The control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualiﬁed person. The light source contained in this luminaire is not replaceable, in case of damage replace the luminaire.

Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque speciﬁcation to assure maximum strength over lifetime.

This product contains a light source of energy efﬁciency class: see table or label.

Disposal of the product.
This product is made of high quality materials and components that can be recycled and reused. If a product is marked with the crossed-out circular garbage can symbol shown here, it means that it is subject to the European Directive 2012/19/EU. You should check the information about local facilities collecting used electrical and electronic products and their packaging on your own. Local regulations prohibiting the discarding of equipment and packaging together with municipal waste must be strictly observed. Proper disposal of used packaging and product will help to avoid potential harmful eﬀ ects on the environment and human health.