Pypes Performance Exhaust SGG61VS Axle-Back Exhaust Systems Instructions
- June 13, 2024
- PYPES PERFORMANCE EXHAUST
Table of Contents
Pypes Performance Exhaust SGG61VS Axle-Back Exhaust Systems Instructions
SGG60VS/SGG60VSB
2008-09 G8 304 Polished Stainless Axle-back w/ Violator Muffler
www.pypesexhaust.com
Thanks again for purchasing your new stainless steel Pypes Performance Exhaust
08-09 Pontiac G8 Axle-back system. Please be sure to confirm all the
components in the kit were received in your shipment before beginning
installation. These kits will include your new Axle-back system w/ Oval
polished stainless tips. If you find any components missing, please contact
our office at 800-421-3890 for
replacement. Installation of these kits will require a few simple tools: jack
stands, 13mm & 15mm wrenches and penetrat- ing oil. For a quicker and tighter
installation, air tools are recommended. Technical assistance is available
both online at www.pypesexhaust.com or
800-421-3890.
Begin by placing the vehicle on a lift or four jack stands at maximum
height. This will aid in an easier installation.
- Unbolt the factory axle-back mufflers from the stock flange using a 13mm wrench. Soaking your factory mounting points with penetrating oil will allow for easier removal. Next, slide the mufflers towards the front of the vehicle to remove them from the factory hangers.
- It’s time to install your new axle-back system. Simply slide the hangers on the new axle-back into the factory mounting point, making sure the gaskets are still in place. Next, bolt the flanges back in place, don’t forget the gasket.
Now it’s time to fire up that muscle car and enjoy your new Pypes Performance Exhaust.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>