PYPES PERFORMANCE EXHAUST SMC31MS Pype Bomb Axle Back Exhaust System Instructions

June 13, 2024
PYPES PERFORMANCE EXHAUST

PYPES-PERFORMANCE-EXHAUST-logo

PYPES PERFORMANCE EXHAUST SMC31MS Pype Bomb Axle Back Exhaust System

PYPES-PERFORMANCE-EXHAUST-SMC31MS-Pype-Bomb-Axle-Back-Exhaust-System-
product

Product Information

  • Product Name: SMC31MS
  • Compatible Vehicles: 2015-20 Challenger & Charger SRT8 & Scat Pack
  • Manufacturer: Pypes Performance Exhaust
  • Address: 2705 Clemens Rd, Hatfield, PA 19440
  • Website: www.pypesexhaust.com
  • Contact Number: 800-421-3890

Product Usage Instructions

  1. Begin by placing the vehicle on a lift or four jack stands at maximum height. This will aid in an easier installation.
  2. This axle-back system does not require complete removal of the factory system, but may make the installation easier for some customers.
  3. Begin by removing the factory tips by loosening the clamps that retain them. Note that the clamp is welded to the pipe and not the tips, so removal is possible.
  4. Next, cut the factory tailpipes on the tangent line of the last bend leading to the active exhaust valves, as per the included diagrams. Additional trimming may be required to achieve the desired fit.
  5. Install and align the tips using the HCV26U clamps in the valance openings and tighten all clamps. The use of air tools is recommended for this step.
  6. Now it’s time to install SMC31MS. Slide the HVC26 band clamps over the slotted portion of SMC31MS.
  7. Next, slide the wire forms into the factory rubber mount hangers.
  8. Finish by sliding the expanded portion over the factory piping. Be sure to file or grind off any metal burrs.
  9. Install and align the tips and tighten all clamps.

STOP
READ THIS WARNING!
Make sure you test fit these exhaust components BEFORE any cutting, welding or unnecessary bending is done. Once modified, the components of the system are

NOT RETURNABLE.
If you are unsure of the proper installation procedures or fitment, please contact a qualified exhaust shop or call our tech lines toll free at 800-421-3890 or visit our in­stallation gallery at: www.pypesexhaust.com/install
One of our experienced exhaust techs will be glad to assist you in any way. Thanks and enjoy you new …
Pypes Performance Exhaust!
SCROLL DOWN FOR INSTRUCTIONS

Overview

SMC31MS
2015-20 CHALLENGER & CHARGER
SRT8 & SCAT PACK
Thanks again for purchasing your new stainless steel Pypes Performance Exhaust. Please take the time now to review these installation instructions and confirm that all the components in the kit were received in your shipment before you begin disas­sembly. If you find a component missing or have questions about the installation please contact our technical department at tech@pypesexhaust.com or through our live chat room found on the home page of the Pypes website at www.pypesexhaust.com.

Pypes Performance Exhaust
2705 Clemens Rd Hatfield, PA 19440 www.pypesexhaust.com
800-421-3890

BILL OF MATERIALS

  1. SMC31MS
  2. HVC26 Clamps
  3. HVC26U Clamps

Installation Instuction

PYPES-PERFORMANCE-EXHAUST-SMC31MS-Pype-Bomb-Axle-Back-Exhaust-
System-02

  1. Begin by placing the vehicle on a lift or four jack stands at maximum height. This will aid in an easier installation.
  2. This axleback system does not require complete removal of the factory system, but may make the installation easier for some customers.
  3. Begin by removing the factory tips buy loosening the clamps that retains them. Note that the clamp is welded to the pipe and not the tip so removal is possible.
  4. Next, cut the factory tailpipes on the tangent line of the last bend leading to the active exhaust valves per the includ­ed diagrams. Additional trimming maybe required to achieve the desired fit.
  5. Install and align the tips using the HCV26U clamps in the valance openings and tighten all clamps. The use of air tools is recommended for this step.
  6. Now it’s time to install SMC31 MS. Slide the HVC26 band clamps over the slotted portion of SMC31 MS.
  7. Next, slide the wire forms into the factory rubber mount hangers.
  8. Finish by sliding the expanded portion over the factory piping. Be sure to file or grind off any metal burrs.
  9. Install and align the tips and tighten all clamps.

Now it’s time to fire up your ride and enjoy your new Pypes Performance exhaust!

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals