anko 43295623 Rechargeable Fan Light with Remote User Manual
- June 13, 2024
- Anko
Table of Contents
anko 43295623 Rechargeable Fan Light with Remote
Product Information
-
Product Name: Rechargeable Fan/Light with Remote
-
Keycode: 43295623
Packaging Contents
- Fan x 1
- Remote control x 1
- USB-C cable x 1
- User manual x 1
Specifications
- Input : DC5V/2A
- Output : DC5V
- Led Power : 0.5W~2W
- Battery Capacity : 5200mAh
- USB Cable Length : 100cm
Product Usage Instructions
Control with no remote
- Press the button to control the fan speed. Press once for low wind, press twice for mid wind, press three times for max wind. Press again to turn the fan off.
- Press the button to control the light. Press once for low brightness, press twice for mid brightness, press three times for max brightness. Press again to turn the light off.
Control with remote
- Use the remote to control the fan and light without pressing the control panel on the fan.
- Press buttons 8, 9, and 14 to set the timer.
The power display shows the battery power. Charge the battery using the provided USB cable. The indicator light will flash to show 25%, 50%, 75%, and 100% battery until the fan is fully charged. Hang the device by the hook if required. This device could be used as a temporary power bank in case of emergency.
Caution
- Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
- The battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage, or transportation.
- Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion.
- Leaving a battery in an extremely high-temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Made in China
Safety instructions
Please read all safety instruction warnings carefully before using this product. Improper use of this product may result in damage to this or attached products.
To ensure the production works well, please never use this in the following conditions
- Moist or underwater conditions.
- Conditions near heater or high temperature service.
- Conditions with direct and strong sunshine.
- Do not use chemical solvent on cleaning this product.
- To avoid being involved by the motor, please keep your hair away from the fan blade cover
- KEEP FAN AWAY FROM HAIR AND JEWELLERY
Packaging contents
- Fan x 1
- Remote control x 1
- USB-C cable x 1
- User manual x 1
Specification
- Input： DC5V/2A
- Output : DC5V
- Led Power ：0.5W~2W
- Battery capacity : 5200mAh
- USB cable length : 100cm
- Wind switch
- Power display
- Light switch
- Wind switch
- Low wind
- Mid wind
- Max wind 8
- 2hrs timing
- 3hrs timing go
- Light switch
- low light
- Mid light
- Max light
- 5hrs timing
How to Use
Control with no remote
- Press button to control the fan speed. Press once for low wind, press twice for mid wind, press three times for max wind. Press again to turn the fan off.
- Press button to control the light. Press once for low brightness, press twice for mid brightness, press three times for max brightness. Press again to turn the light off.
Control with remote
- Use the remote to control the fan and light without pressing the control panel on the fan.
- Press 8○9○○14 button to set timer
Power display shows the battery power. Charge the battery using the provided
USB cable. The indicator light will flash to show 25% 50% 75% 100% battery
until the fan is fully charged.
Hang the device by the hook if required.
This device could be used as a temporary power bank in case of emergency.
Caution
- Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- Battery cannot be subjected to high or low extreme temperatures, low air pressure at high alt itude during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leaka ge of flammable liquid or gas.