Dimplex DCTF91W 91cm and 117cm Tower Fan Instruction Manual

: June 13, 2024
: Dimplex

Table of Contents

DCTF91W 91cm and 117cm Tower Fan
Product Information
Specification
Parts
Assembly
Operation
Cleaning
Maintenance
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DCTF91W 91cm and 117cm Tower Fan

Product Information

Model: DCTF91W & DCTF117W
Color: White
Power Supply: 220-240V~, 50-60Hz
Rated Power: 45W
Speed Settings: 3
Modes: 4 (Normal, Natural, Sleep, Child)
Timer: 1-12 hours
Air Speed: 5.8m/s
Oscillating: Yes
Controls: Button & Remote Control
Noise Level: 5 4db(A)
Weight (net): 3.35kg (DCTF91W), 3.73kg (DCTF117W)
Dimensions (w x d x h): 315 x 315 x 910mm (DCTF91W), 315 x 315 x 1170mm (DCTF117W)

IMPORTANT
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.

Note also the information presented on the appliance

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY

Please read the operating instructions carefully before using your fan for the first time and keep them in a safe place.

WARNING : This appliance must not be used in a bathroom.

Do not use this appliance in the immediate surroundings of a bath, a shower, or a swimming pool.
Never immerse the appliance in water or other liquids.
Operate this unit only on a firm, flat surface.
Do not place on soft, unstable or non-horizontal/angled surfaces.
Never operate the appliance if a cable or connector has been damaged after the appliance malfunctioned, or if the appliance was dropped or is otherwise damaged.
If the mains lead is damaged it must only be replaced by the manufacturer’s service agent or a similarly qualified person in order to avoid a hazard.
Please ask a professional service agent to repair the product. Improper repair may cause danger to users.
Disconnect the appliance from mains power whenever it is not in use, before relocating it, and before cleaning.
Operate the appliance only at the voltage specified on the rating label.
Only connect the unit to a properly installed and easily accessible socket so that you can quickly disconnect the plug if necessary.
Do not connect this product to the mains using an extension lead.
This fan is only intended for INDOOR RESIDENTIAL applications. This fan should not be used for commercial industrial or leisure applications or in small enclosed spaces.
Never use the mains lead as a carrying strap or pulling lead.
To avoid a fire or electrocution hazard, NEVER put the cord near heat registers, radiators, stoves, or heaters.
DO NOT cover the cord with carpeting, throw rugs, runners, or similar coverings.
DO NOT route the cord under furniture or appliances. Take care to position the cord away from traffic areas and where it will not be a tripping hazard.
DO NOT use the unit near windows or where water collects. Rain and water collection may lead to a risk of fire or electric shock.
Only operate this appliance with a minimum of 50cm clearance all around i.e. away from walls, furniture, and overhanging objects such as curtains or a shelf.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
To prevent spillage, empty the water tank before lifting or relocating the appliance.
WARNING: To avoid the danger of suffocation please remove all packaging materials, particularly plastic and EPS, and keep these away from vulnerable people, children, and babies.
NEVER drop or insert any object or fingers into any openings.
Do not use the appliance in locations where paint, petrol, or other flammable liquids are used or stored.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not use bug sprays or other flammable cleansers/vapor sprays on or around the unit.
Always switch off the unit and take the plug out of the socket:
- If you are not using the unit
- Before you clean or carry out maintenance on the unit
- If a fault occurs
- In the event of an electrical storm.
Avoid electromagnetic interference. Keep the unit at least 1 meter away from electrical appliances such as televisions & radios.
DO NOT use this appliance with an extension lead or power board.

WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN

Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (in Australia) or 0800 764 766 (in New Zealand) for fast, expert advice.
Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if the compartment is not secure.
Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.

Dimplex-DCTF91W-91cm-and-117cm-Tower-Fan-FIG-1

Specification

Dimplex-DCTF91W-91cm-and-117cm-Tower-Fan-FIG-2

For greater precision, please always refer to the rating label placed on the product.

Parts

Assembly

Align the centers of the two parts of the base. Rotate one part to ensure the holes align, and the base sticks together.
Fix the fan body with four screws (included). Screw clockwise.

Operation

This tower fan can be operated by the control panel or remote control. Please refer to the below diagrams and descriptions.

Control Panel

Display Panel

Cable Hook
The Cable Hook is used to help hang the power cord when the device is no longer in use. Place on the back of the unit as per below.

Remote Control

Install x1 CR2025 button cell battery into the remote.
All remote control buttons are labled as below and function work identically to the manual controls.

Control Panel

Place the fan on a stable and flat surface. Plug the cord set into power outlet.
Turn the fan on by pressing the ‘POWER’ button. To turn the fan off, press the ‘POWER’ button again.
You can adjust the fan speed to the desired level between 1-3 by pressing the ‘SPEED’ button. The speed setting is displayed on the LED display.
You can adjust the mode by pressing the ‘MODE’ button. The four modes are ‘normal’ ‘natural’, ‘sleep’ and ‘child.’ NORMAL mode is the default mode the fan starts in. In NATURAL Mode, the fan speed rotates between high, medium and low speed in five second increments. In SLEEP Mode, if originally set at high speed, the fan will work on this setting for thirty minutes, then transfer to medium speed for thirty minutes, and then low until it turns off. If originally set at medium speed, the fan will operate on this setting for thirty minutes, and then transfer to low speed until it switches off. If originally set on low speed, the fan will work on low speed until it switches off. In CHILD Mode, the timer will automatically set to three hours, and the oscillation function will begin. The device will be on high speed for fifteen minutes, transfer to medium speed for 15 minutes and then act on low speed until it automatically switches off. The automatic oscillation can be switched off manually during this process.
To set the fans timer, press the ‘TIMER’ button. This allows you to set the fans length of operation between 1-12 hours.
To make the fan oscillate, press the ‘OSC’ button. This allows the fan to oscillate up to 65°.
The display can be temporarily switched off by pressing the ‘DISPLAY’ button on the remote control or by pressing the ‘SPEED’ button on the control panel for more than three seconds. The display will turn back on after any button is pressed again.

Cleaning

Over time, dust can accumulate on the fan grille, which can affect the fan’s performance. It is recommended to clean the fan at least once a month.

Turn the unit OFF and disconnect the appliance from the power supply.
Remove any dust build up with a soft brush.
Wipe the surface of the unit with a soft damp cloth. A mild detergent can be used for any stubborn marks.

Do not use abrasive sponges, scouring pads, or a stiff brush to clean the unit.

IMPORTANT
The control panel and other parts must not come into contact with water or any other liquids.

Storage
If not using the unit for an extended period of time. After cleaning please:

Turn the unit off, unplug and take care of the mains lead & plug.
Cover the unit and store it upright in a location where it will not receive direct sunlight. NB- Prolonged exposure to direct sunlight will discolour the enclosure.

Maintenance

If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate. Ask for advice by calling your local after sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ).

Warranty

Please refer to the warranty card in the box for warranty information. For any troubleshooting advice, please contact the relative Customer Care Centre below.

Glen Dimplex Australia Pty Ltd 8 Lakeview Drive,
Scoresby 3179, Victoria Australia
Ph: 1300 556 816

Glen Dimplex New Zealand Ltd
38 Harris Road, East Tamaki, Auckland 2013
Ne Zw ealand
Ph: 0800 666 2824

Recycling: Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the ground water, polluting the food chain and damaging health and well-being.

Customer Care: 1300 556 816 customer.care@glendimplex.com.au www.dimplex.com.au
Supplied by Glen Dimplex Australia 8 Lakeview Drive, Scoresby, Victoria, 3179