JL GLOBAL BV Just Perfecto 3-in-1 Stick Vacuum Cleaner Instruction Manual

INSTRUCTION MANUAL Vacuum cleaner JL-16
JL GLOBAL BV

Just Perfecto 3-in-1 Stick Vacuum Cleaner

MODEL NO.: JL-16
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING AND KEEP IT PROPERLY FOR FUTURE REFERENCE Part name:

1. Handle
2. Tube
3. Handle release button
4. Body
5. Switch button
6. Cable hanger up
7. Cable
8. Plug
9. Air outlet
10. Cable hanger down
11. Container release button
12. Dust container
13. Floor brush
14. Round brush
15. Nozzle
16. Connector

WSD9211 Technical data
Input voltage /current: 220 – 240V ~， 50Hz，
Protection class: II/
Important Notes:
Before using the device, please read the user manual carefully and save it for future reference.

• Check whether the operating voltage of the machine corresponds to the local power supply voltage before use.
• If the plug, power cord or the appliance itself is damaged, do not use it.
• If the power cord of this appliance is damaged, you must replace it to avoid danger.
• Keep electrical appliances out of the reach of children.
• Never absorb water or any other liquids, do not inhale flammable substances, do not inhale blades or other sharp objects.
• Do not put the tube or any other accessories on the eyes or ears, and do not put it in your mouth when it is connected to the vacuum cleaner.
• Please do not vacuum in unusual environments (such as cement, plaster), otherwise it will greatly shorten the long life of the vacuum cleaner, or even damage the vacuum cleaner.

Preparation :

Assemble handle and tube

Connect the interface of the connecting tube to the handle. When the handle is locked at the round hole of the handle and you hear the sound of the key being clicked, it will be installed in place.
If you want to connect the tube with a rope, hold the buckle with one hand, hold the connecting tube with the other hand and remove it.

Assemble & disassemble the floor brush

1. Align the interface of the floor brush with the entrance of the dust bucket, and make sure that it is not loose when pushed in place.
2. If you want to remove the floor brush, please hold the floor brush with one hand and the machine with the other hand, and then remove the floor brush.

Using nozzles

1. Before using the flat suction and round brush, you need to connect the conversion interface, and push the interface of the conversion interface to the entrance of the dust bucket in the assembly method, and make sure that it is not loose in place. Hold the conversion interface with one hand and unplug it.
2. Flat suction, suitable for cleaning small gaps or irregular surfaces, such as wall corners, window seams, keyboards, car corners, etc. The disassembly method is to turn the flat suction interface to the circular interface to ensure that it is not loose when pushed in place Can.
3. The round brush is suitable for cleaning sofas, seats, bedding, etc. The removal method is the same as the flat suction.

Caution

1. As shown in Figure 1, please make sure that the power supply is safe and that the local voltage is consistent with the voltage recognized by the product, and then first rotate the rotating wire hook 180 degrees before removing the power cord.
2. As shown in Figure 2, put the power plug in and out of the power socket.
3. As shown in Figure 3, press the power button to work normally.

As shown in Figure 1; Rotate the rotating hook 180 degrees and remove the power cord from the machine.As shown in Figure 2: Then plug the charging plug into the power supplyAs shown in Figure 3: Press the switch button, the product starts to work.

Clean the dust container

When the container reaches the max line or the suction power is significantly reduced, the dust container should be cleaned in time to ensure the best cleaning effect.
Stop the device. Put the device on the dust container. Press the lock of the dust bucket, you can remove the dust cup and lead the garbage in the dust cup into the dust container.

Change or Wash HEPA filter

The filter can be blocked after a period of time, thereby reducing suction. Therefore, it is very important to clean the filter in time.

1. Press the button of the dust bucket lock button to rotate the dust cup in the unlocking direction and pull it out;
2. Rotate HEPA a quarter turn to take out HEPA;
3. Remove the nylon net;
4. Rinse HEPA or blow out the filtered dust
5. After drying, put it in and use again.

Environment

At the end of the product’s life, don’t throw away your electrical appliances with ordinary household trash. Give it to an official collection point for recycling. This will protect the environment even more.
Warning：
Note: All the contents of this project are related to safety, please let users observe it. In order to use this product correctly, this project has taken preventive measures. Pay attention to the risks, the magnitude of the risks, and the possible accidents.

• Without the permission of the manufacturer, other parts are not allowed. If the machine fails, the warranty will be automatically suspended.

• After unpacking, please check whether the product is damaged and the parts are complete.

• If the power cord is damaged, it must be replaced by the manufacturer, maintenance department or similar department in order to avoid danger.

• Children and incapacitated people use this product under the supervision of their guardians.

• If a malfunction occurs, immediately unplug the power supply.

• Please do not place the vacuum cleaner too close to heat sources and other heat-generating objects to avoid deformation of the plastic parts and affect the use.

• When using a vacuum cleaner, please pay attention to each filter element installed, and do not use the vacuum cleaner without a filter element.

• Pay attention to check the plug, the power cord must be intact to avoid the risk of electric shock.

• Ensure the safety of the power supply, and the local voltage is consistent with the voltage recognized by the product.
  We recommend that you cut off the power before disposing of the product. It is also recommended that you have any possible danger, especially for dangerous children to take the same action.

• This product is for home use only. Do not use this product outdoors.

• Please do not use a vacuum cleaner to suck cigarette butts to avoid danger. Please do not inhale detergent, kerosene, gasoline, paint, sewage and other liquids, so as to prevent the liquid from entering the motor and causing the motor to malfunction.

• When using a vacuum cleaner, please do not inhale hair balls, large paper balls, which are easy to be blocked by the suction port, etc., which will cause the motor to be blocked. If inhalation causes blockage, please stop in time and pull out the dust bucket or interface to clean.

• When cleaning the vacuum cleaner, please use a damp cloth or neutral detergent, do not use gasoline, banana oil, etc., otherwise it will cause the shell to crack or fade.

• Please do not use a vacuum cleaner to suck fine particles such as cement, gypsum powder, starch, etc., otherwise it will cause malfunctions such as clogging of the vacuum cleaner filter and burning of the motor. If you inhale fine particles, please clean the filter in time.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>