SUNGROW iSolar Cloud App User Guide
- June 13, 2024
- SUNGROW
Table of Contents
iSolarCloud FAQ
iSolarCloud Quick-Guide Applicable to: iSolarCloud
iSolar Cloud App
To register for a new iSolarCloud account, choose Register on
iSolarCloud.eu.
Sign up
for an End User account and type in your details on the next page.
Type in your
Email address (1.) and request your Verification code (2.), check your emails
and insert the Verification Code (3.). Now insert a Password (4.), repeat the
Password (5.), choose your region (6.), accept Privacy Policy (7.) and
Register (8.).
Be
aware: You only see your plant after signing up with iSolarCloud, if your
registered Email address has been set as the plant owner. This is usually set
during commissioning.
Make sure, you sign in on the European Server on
https://www.isolarcloud.eu.
After signing in, you reach the plant overview, where you can
check Today Yield, Real-time Power and installed PV-Power.
If you click on the plant name
under the picture, you see the current energy flow in your system (1.) on the
right upper side. The arrows indicate the flow of energy. In this example to
load consumes 841W from the battery and 1.091kW from PV. The system does not
feed in or consume energy from the grid. On the lower left, the circle
describes the consumption of the DC-power (2.). In this example 79,55% of the
total DC energy this day was consumed by the load and 20,45% was used to
charge the battery. The other circle (3.) describes the load consumption.
20,29% of the consumed energy was generated by PV and 79,71% was supplied by
the grid.
Use the
left-hand side menu for navigating to the following options:
-
Fault:
Here you find Active faults (if present) and a Fault History (1.). You can choose a time period (2.) and Alarm type (3.) you want to look at.
-
Report:
In Report you can view Statistics Reports or create your own Customized Report.
-
Curve:
In Curve you can view and configure curves for several values of the entire plant, single inverters or communication module/dataloggers. You can choose the channel you want to visualize (1.), set time and refresh period (2.) and set if you want to show it as bar or line (3.). If you need to check this curve frequently, you can save it in the template library (4.).
-
Advanced:
The Advanced setup allows you set parameters (1.), view Live data (2.), Remote Maintenance (only when Logger installed) (3.) and Smart Alarm Analysis Setting (4.).
For further information, please download the user manual here.
https://file.isolarcloud.com/app_page/html/isolarcloud/download.html
This manual is intended for professional technicians who are responsible for
installation, operation, maintenance and troubleshooting of inverters, and
users who need to check inverter parameters. The inverter must only be
installed by professional technicians.
The professional technician is required to meet the following requirements:
- Know electronic, electrical wiring and mechanical expertise, and be familiar with electrical and mechanical schematics.
- Have received professional training related to the installation, commissioning and troubleshooting of electrical equipment.
- Be able to quickly respond to hazards or emergencies that occur during installation, commissioning and troubleshooting.
- Be familiar with local standards and relevant safety regulations of electrical systems.
- Read this manual thoroughly and understand the safety instructions related to operations.
© 2021 Sungrow. All rights reserved.
Subject to change without notice. Version 1.1
Sungrow Deutschland GmbH
Balanstr. 59
81541 München
www.sungrowpower.com
References
- iSolarCloud.eu
- support.sungrowpower.com/productDetail?id=195&vId=1408234037470924802
- Leading Solar Inverter and Energy Storage Solutions Provider - Sungrow US
- Leading Solar Inverter and Energy Storage Solutions Provider - Sungrow US
- isolarcloud.eu
- isolarcloud.eu/