FRICO IHW15 Infrared Heater User Manual

June 13, 2024
FRICO

FRICO IHW15 Infrared Heater

FRICO-IHW1-Infrared-Heater-PRODUCT

Product Information

The product is an infrared heater available in two types: IHW with wide heat distribution and IHF with directed heat distribution. The IHW models have item numbers 11878, 11879, and 11880, while the IHF models have item numbers 11881, 11882, and 11883. The heaters have different heat output options of 1000W, 1500W, and 2000W. They operate at a voltage of 230V~ and have amperage ratings of 4.3A, 6.5A, and 8.7A. The length of the heaters  varies between 500mm and 676mm. The weight of the heaters rangesfrom 1.9kg to 2.5kg.

Product Usage Instructions

  1. Positioning:
    • Ensure that the heaters are mounted at a minimum distance from flammable materials.
    • Install the heaters at an appropriate installation height.
    • The heaters should heat from at least two directions for even heating.
  2. Replacing the lamp:
  3. Switch off the power supply before replacing the lamp.
  4. Remove the front grille by unscrewing the screws.
  5. Slide the grille to one side.
  6. Remove the reflector ends by loosening two clamps.
  7. Disconnect the lamp from the lamp holder.
  8. Install a new lamp ensuring proper power and safety requirements.
  9. Reassemble the reflector ends, grille, and screws.
  10. Wiring diagrams for Timer control:
    • Refer to the separate manual for detailed wiring diagrams.
    • For Timer control with contactor, follow the specified wiring connections.

For any further information and local contact details, visit www.frico.net.

The introduction pages consist mainly of pictures. For translation of the English texts used, see the respective language pages

Dimensions

FRICO-IHW1-Infrared-Heater-FIG- \(1\) FRICO-IHW1
-Infrared-Heater-FIG- \(2\)

Positioning

Installation height

Minimum mounting distance

FRICO-IHW1-Infrared-Heater-FIG-
\(5\)

Replacing the lamp

FRICO-IHW1-Infrared-Heater-FIG-
\(6\)

Accessories

FRICO-IHW1-Infrared-Heater-FIG- \(7\)

Controls

FRICO-IHW1-Infrared-Heater-FIG- \(8\)

Technical specifications

Infrared heater IHW with wide heat distribution (IP44)

Item number| Type| Heat output [W]| Voltage


[V]

| Amperage


[A]

| Max. filament temperature [°C]| Length


[mm]

| Weight


[kg]

---|---|---|---|---|---|---|---
11878| IHW10| 1000| 230V~| 4,3| 2200| 500| 1,9
11879| IHW15| 1500| 230V~| 6,5| 2200| 500| 1,9
11880| IHW20| 2000| 230V~| 8,7| 2200| 676| 2,5

Infrared heater IHF with directed heat distribution (IP44)

Item number| Type| Heat output [W]| Voltage


[V]

| Amperage


[A]

| Max. filament temperature [°C]| Length


[mm]

| Weight


[kg]

---|---|---|---|---|---|---|---
11881| IHF10| 1000| 230V~| 4,3| 2200| 500| 1,9
11882| IHF15| 1500| 230V~| 6,5| 2200| 500| 1,9
11883| IHF20| 2000| 230V~| 8,7| 2200| 676| 2,5

Wiring diagrams

Timer controlFRICO-IHW1-Infrared-Heater-FIG- \(9\)

Timer control with contactorFRICO-IHW1-Infrared-Heater-FIG-
\(10\)

Main office Frico AB Tel: +46 31 336 86 00 Industrivägen 41
SE-433 61 Sävedalen mailbox@frico.se
Sweden www.frico.net
For latest updated information and information about your local contact: www.frico.net

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals