FRICO IHF15 Short Infrared Instruction Manual
- June 13, 2024
- FRICO
Table of Contents
FRICO IHF15 Short Infrared
Product Information
The product is an infrared heater available in two types: IHW (with wide heat distribution) and IHF (with directed heat distribution). Each type comes in three different models: IHW10, IHW15, and IHW20 for IHW, and IHF10, IHF15, and IHF20 for IHF. The heat output ranges from 1000W to 2000W, and the voltage is 230V~. The heaters have an IP44 rating, indicating protection against solid objects larger than 1mm and water splashes from any direction. The length of the heaters varies between 500mm and 676mm, and the weight ranges from 1.9kg to 2.5kg.
Product Usage Instructions
- Positioning: The heaters should be positioned in such a way that they heat from at least two directions for even heating. Refer to Fig.1 for a visual representation.
- Minimum mounting distance: Maintain a minimum distance of 200mm between the heater and any other object or surface.
- Installation height: Install the heater at a suitable height according to your requirements. The recommended installation height is 1600mm.
- Flammable material: Ensure that there are no flammable materials within the vicinity of the heater to prevent fire hazards.
- Replacing the lamp: If required, refer to the separate manual for instructions on how to replace the lamp.
- Accessories: The product may have additional accessories available for purchase.
Refer to the list of accessories provided for more information. For any further information or specific instructions, please visit the official website at www.frico.net or contact the customer support team at +46 31 336 86 00 or mailbox@frico.se .
The introduction pages consist mainly of pictures. For translation of the English texts used, see the respective language pages
Dimensions
Wall bracket
IHE (18050)
Positioning Fig.1: The heaters should heat from at least two directions for even heating
Installation height
Minimum mounting distance
Replacing the lamp
Accessories
| 11884 | **IHUB*** |
|---|---|
| 18050 | IHE |
| 16975 | **IHXH*** |
| 16976 | **IHXL*** |
| 11887 | **IHT*** |
| 16974 | **IHTW*** |
| 16970 | **IHP*** |
| 92865 | KLS1KS |
| 93272 | IHAF |
| 220646 | IHL1000 |
| 220647 | IHL1500 |
| 206496 | IHL2000 |
*) See separate manual.
Controls
- 92867 IHBD3*
- 10740 CBT
*) See separate manual.
Technical specifications
Infrared heater IHW with wide heat distribution (IP44)
Item number| Type| Heat output [W]| Voltage
[V]| Amperage [A]| Max. filament temperature [°C]|
Length [mm]| Weight [kg]
---|---|---|---|---|---|---|---
11878| IHW10| 1000| 230V~| 4,3| 2200| 500| 1,9
11879| IHW15| 1500| 230V~| 6,5| 2200| 500| 1,9
11880| IHW20| 2000| 230V~| 8,7| 2200| 676| 2,5
Infrared heater IHF with directed heat distribution (IP44)
Item number| Type| Heat output [W]| Voltage
[V]| Amperage [A]| Max. filament temperature [°C]|
Length [mm]| Weight [kg]
---|---|---|---|---|---|---|---
11881| IHF10| 1000| 230V~| 4,3| 2200| 500| 1,9
11882| IHF15| 1500| 230V~| 6,5| 2200| 500| 1,9
11883| IHF20| 2000| 230V~| 8,7| 2200| 676| 2,5
Wiring diagrams
Timer control
Timer control with contactor
Dimensions
- Wall bracket
- Positioning
- The heaters should heat from at least two directions for even heating
- Installation height
- Minimum distance
- Flammable material
- IHE, ceiling bracket
- Replacing the lamp
- Accessories
- See separate manual.
- Controls
Timer control
Timer control with contactor
- Item number
- Type
- Heat output [W]
- Voltage [V]
- Amperage [A]
- Max. filament temperature [°C]
- Length [mm]
- Weight [kg]
Main office Frico AB Tel: +46 31 336 86 00
mailbox@frico.se
Sweden www.frico.net
For latest updated information and information about your local contact:
www.frico.net
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>