EKVIP 024383 Wall Lamp Wall Instruction Manual

: June 13, 2024
: EKVIP

Table of Contents

EKVIP 024383 Wall Lamp Wall
Product Information
Safety Instructions
Product Usage Instructions
SAFETY INSTRUCTIONS
SYMBOLS
TECHNICAL DATA
INSTALLATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EKVIP 024383 Wall Lamp Wall

Product Information

Product Name: Wall Lamp
Model Number: 024383
Manufacturer: Jula AB
Copyright: Jula AB claims copyright on the documentation
Website: www.jula.com
Address: Jula AB Box 363, 532 24 Skara, Sweden
Technical Specifications:
- Voltage: 230 V ~ 50 Hz
- Max permitted output of light source: 60 W
- Socket: E27
- Protection rating: IP44
- Size: B15 x D19.5 x H32 cm

Safety Instructions

New installations and extensions to existing systems must be carried out by an authorized electrician.
Incorrect installation can result in fatal injury and the risk of fire.

Product Usage Instructions

Read the instructions carefully before installation and use.
Ensure that the lamp is installed by a registered electrician.
Make sure to recycle discarded products in accordance with local regulations.
Connect the lamp to a power source with a voltage of 230 V ~ 50 Hz.
Use a light bulb with a maximum output of 60 W and an E27 socket.
The lamp has a protection rating of IP44, which means it i protected against water splashes and solid objects larger than 1 mm.
The dimensions of the lamp are B15 x D19.5 x H32 cm.
Follow the figures provided in the manual for installation.
For any further information or updates, refer to the Jula website.
Please note that the provided text-extract from the user manual does not contain specific usage instructions.

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.

SAFETY INSTRUCTIONS

The product is only intended for outdoor use.
Switch off the power supply before installation.
Before cleaning, maintenance and/or other work on the product, switch off the power supply by removing the fuse or pulling out the plug.
Products with transformers must only be used with the original transformer.
Do not allow children to play with the packaging material or the product.
These instructions should be enclosed with the product if it is sold or passed on.
Do not connect the lamp to the mains while it is still in the pack.
Stop using the product immediately if it gets damaged, especially the power cord, plug and/or lamp socket, and if it is not working properly.
Repairs must be carried out by an authorised electrician.
Never attempt to modify or repair the product. Repairs that are not carried out correctly can result in a risk of serious personal injury and/or death.
The product’s earth wire (green/yellow) is connected to earth.
Be careful not to damage the insulation on the wires during installation. Make sure that the wires do not come into contact with sharp edges. Damaged insulation can result in a risk of electric shock.
Check that the mains voltage corresponds to the rated voltage on the type plate.
The plug, power cord, wires and connections must not be subjected to mechanical stress.
WARNING!
New installations and extensions to existing systems must always be carried out by an authorised electrician. If you have the necessary experience and knowledge (otherwise contact an electrician), you can replace power switches and wall sockets, fit plugs, extension cords and light sockets. Incorrect installation can result in fatal injury and the risk of fire.