REED 08226 Round It Straightener Rerounder Instructions
- June 13, 2024
- REED
Table of Contents
REED 08226 Round It Straightener Rerounder
Product Information
- Applies to: 08226, 08227, 08228
- Model Numbers: RCR3/4 #08226, RCR1 #08227, RCR341 #08228
- Designed for use with Type K Copper tubing
- The tool is used to straighten and round Type K copper tubing
- Work hardening and age hardening of copper can affect the tool’s performance
- The initial out-of-roundness of the tube can also impact the tool’s performance
Product Usage Instructions
- Rerounding:
- Place the tool over the copper tube.
- Push the handles together.
- Release the handles.
- Repeat as needed.
- Adjusting the tool:
- Loosen the Lock Screw.
- Turn the Adjusting Screw clockwise to close the jaws. (Turn counterclockwise to open the jaws.)
- Tighten the Lock Screw. (Note: Over tightening the Lock Screw may cause the handle to break during use.)
Contact Information:
Reed Manufacturing
1425 West 8th St. Erie, PA 16502 USA
Phone: 800-666-3691 or
+1-814-452-3691
Email: [email protected]
Website: www.reedmfgco.com
Manual Reference: 0123-58226
Use only with “K” Copper
The tool straightens and rounds anywhere along the length of Type K copper tubing. Work hardening and age hardening of copper can degrade the performance of this tool. The degree of initial out-of-roundness of tube can also degrade the toolʼs performance. Results may vary due to the above pre-existing conditions.
Rerounding
- Place the tool over the copper tube and push the handles together. Then, release.
- Rotate the tool 90º and push the handles together. Then, release.
- Repeat as needed.
Adjusting the tool
- Loosen the Lock Screw.
- Turn the Adjusting Screw clockwise to close the jaws.(Turn counterclockwise to open the jaws.)
- Tighten the Lock Screw. (Over tightening the Lock Screw will cause the handle to break in service.)
Reed Manufacturing 1425 West 8th St. Erie, PA 16502 USA
Phone: 800-666-3691 or
+1-814-452-3691
[email protected]
www.reedmfgco.com
References
Read User Manual Online (PDF format)
Loading......