CTA PAD-PARAFW Paragon Premium Locking Floor Stand Kiosk Instruction Manual
- June 13, 2024
- CTA
Table of Contents
CTA PAD-PARAFW Paragon Premium Locking Floor Stand Kiosk
Product Information
- Product Name: Paragon: Premium Locking Floor Stand Kiosk (White)
- Model Number: PAD-PARAFW
- Manufacturer: CTADigital
- Contact Email: support@ctadigital.com
- Website: https://manual-hub.com/
Product Usage Instructions
- To route a charge cable through the stand:
- Attach the weighted pendant to your charge cable.
- Pass the cable with the weighted pendant through the ring at the top of the stand.
- When the cable reaches the bottom of the stand:
- Pull the cable through the hole at the back of the stand.
- Remove the weighted pendant from the cable.
- If your cable end is too big:
- Remove the ring from the top of the stand.
- Pass the cable with the weighted pendant directly through the opening without using the ring.
- Finally, route the cable out from the back of the stand and remove the weighted pendant.
- To lock the stand:
- Turn the locking point clockwise to secure it (Note: The enclosure is not rotary).
Installation Instructions
- To route a charge cable through the stand, attached the weighted pendant to your charge cable, then pass through ring at the top of the stand.
- When cable reaches the bottom of the stand, pull through the hole at the stand back and remove the weighted pendant.
- If your cable end is big, remove the ring first and pass the cable with weighted pendant directly through the opening.
- Cable out from back & remove the weighted pendant.
Locking point
- Clockwise to lock
- (Enclosure not rotary)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>