VEVOR SF-890 Shipping Scale User Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR SF-890 Shipping Scale
NEED HELP? CONTACT US! Have product questions?
Need technical support?
Please feel free to contact us: at
CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, the user must read the instructions manual carefully.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices
INSTRUCTION
Thank you very much for choosing this digital scale. weighing scales are precision instruments that should always be handled with care. Please read all of the instructions before using it. The information will help you achieve the best possible results.
- A ON/OFF button
- B TARE button
- C MODE button
- D HOLD button
- E Coiled cable
- F LCD display
- G Weighing plate
- H RJ11 joint
I Power Adapter
FEATURE
- Large LCD display with backlight
- Low battery indication “LO”, overload indication “O_Ld”
- If you don’t operate the scale, it will automatically power off after 5 minutes.
- If the scale is powered by an adapter or during calibration, the scale will not automatically power off.
| Capacity × Graduation | 50kg×2g |
|---|---|
| Weighing units | Kg, lb, lb: oz, g |
| Weighing pan size | 9.84”×9.84” |
| Overload indication | [ O_Ld ] or [ Err ] |
| Low voltage indication | [ LO ] |
| Optimum operating temperature | 5℃-35℃ |
| Power Supplier | 2xAAA(1.5V) batteries or AC adapter |
(110-240V AC to 5V DC)
BUTTON FUNCTION
Button Functions
- ON/OFF Button: Pressing this button will turn the scale on and off
- TARE Button: Pressing this button will take the weight of the load.
- The tare function will eliminate the weight put on the scale, such as a container or vessel. This will give the weight only of the items added to the container.
- MODE Button: Pressing this button changes the unit of measure for the scale.
- HOLD Button: Press the HOLD button to lock the readout, even if you take away items, the readout will keep on.
OPERATION
- Please put a scale on a level platform.
- Please put batteries into the scale or plug the adapter into the scale.
- Press the “ON/OFF” button to turn the scale on.
- Wait until the display shows “0” (zero) before placing any weight on the scale.
- Carefully place the item(s) on the platform.
- After a few seconds, the weight will stabilize and you can now get weight data from the LCD display.
- Press the “MODE” button, you can switch between weighing units.
- You can set auto-off time by following the method: long press the TARE button to choose the auto-off time and press the TARE button to shift from “1” “3” “5” “-“(OFF), press the MODE button to confirm.
CALIBRATION
- Put the scale on a flat platform
- Turn on the scale, and press the “MODE” for six seconds, the scale will show the capacity
- Press the “TARE” button to choose the calibration value from “2kg/5kg/10kg”. Please press “MODE” to confirm the calibration value.
- Put counterweight on the platform according to what the indicator shows. The indicator will show “PASS” after the readout is stable.
- If the loading weight is not stable or you stop calibration, the scale will show “Err” and automatically turn off after one minute.
- You can press ON/OFF to stop calibration.
CARE INSTRUCTIONS
- Don’t put the scale on an uneven surface
- Don’t expose the scale to moisture
- Don’t drop or mistreat the scale
- Don’t overload the scale. This will permanently damage it!
- Don’t leave weight on the scale when not in use.
- Replace the battery when the scale shows “LO” on the display.
| items | Description | |
|---|---|---|
| 1 | Name | Shipping Scale |
| 2 | Model | SF-890 |
| 3 | Parameter | Rating(s)：2×1.5AAA or 5Vdc，Capacity:50kg/110Ib, Division:2g |
| 4 | Package |
Size
| 295x280x105mm
5| G.W.| 2.3KG
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Jiangyin SuoFei Electronic Technology Co., Ltd.
Address: Building 70, Chuangrong Industrial City, Yucheng Street, Yuhuan
City, Zhejiang Province
Made In China
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>