T nB EBFEATWH3 Bluetooth Earphone Instructions
- June 13, 2024
- T-nB
Table of Contents
Bluetooth® earphone
Instructions
EBFEATWH3
OUR THANKS
Congratulations on your purchase and thank you for the trust you have placed in T’nB. Our products comply with the all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTIONS
– No guarantee will apply in case of misuse.
– T’nB accepts no liability if the safety instructions are not respected.
– Handle the device with care.
– The power supply of your device must match the initially specified
characteristics
– The socket of the electrical equipment must be located near the said
equipment and easy to get to.
– Keep the device away from flammable objects, explosive substances or
dangerous objects.
– Use and store your device in an environment where the temperature is between
0°C and 40°C.
– Store your device out of the reach of children.
– This device is not designed to be used by persons (including children) whose
physical, sensory or mental capacities are reduced, or persons without
experience or knowledge, except if they are supervised or receive prior
instruction on using the device by a person in charge of their safety.
– Do not disassemble your device and do not attempt to repair or modify it
yourself.
– Stop using your device if it has been hit or damaged.
– To avoid the risk of electric shock, disconnect your device from the mains
and from any other device before cleaning it or when not in use.
– Only use the supplied accessories and connectors. The use of any other type
of accessory not intended for this purpose may irremediably damage your
device.
– Make sure the appliance is switched off and cold before cleaning. Do not use
any product or lubricant which may damage the appliance.
– T’nB accepts no liability for damage caused by misuse of the product or by
use with an incompatible electrical device.
– Unless otherwise stated, never use your device in rain, in damp places or
near a water source.
– Unless otherwise stated, this product is for indoor use only.
– Do not leave wireless products near credit cards or other data storage
devices.
– Avoid using your wireless devices near sources of interference, such as
power supply cables, microwave ovens, fluorescent lamps, wireless video
cameras and wireless domestic telephones.
– To improve the quality and the strength of the wireless signal, reduce the
number of devices operating on the same wireless frequency.
– Switch off the helmet/earphones after use and tidy it/them away in a
suitable place to avoid damage, scratches and warping.
– Do not set the volume to a high level before switching on the product.
Slowly increase the volume to avoid damaged cause by a high volume.
– Do not use the helmet/earphones in a dangerous place or in a location where
you cannot hear outdoor sounds.
– Do not leave the device on charge unattended. In the event of a short
circuit or mechanical damage to the internal lithium battery, there is a risk
of overheating or fire.
– WARNING: risk of explosion if the battery is replaced with an inappropriate
model. Recycle used batteries in accordance with current regulations.
– Please fully charge before using the first time
- Touch control
- Charging case
RECHARGING YOUR CASE AND EARPHONES
Your case protects and recharges your earbuds.
It is fitted with an internal battery that can recharge your earbuds 3 times.
To recharge the case battery, use the USB-C cable supplied. Connect the cable to the case, then connect the other end to a USB port: computer, USB charger, etc. The indicator light under the case will flash red to show that the earbuds are being charged. When the case and the earbuds are totally charged, the indicator light will stay on green.
If the battery charge of the earbuds is low, they will emit a reminder by saying “low battery’s. Place them in the case now.The indicator light behind the earbuds will come on red, which tells you that the recharging case is charging your earbuds. The red Indicator light of each earbud will go off once they are fully charged.
TURNING ON THE EARBUDS
- The earbuds will turn on and pair automatically when you take them out of the charging case. The pairing mode is then activated.
- If the earbuds do not come on automatically, press the touch control button for 3 seconds.
PAIRING
The earbuds will automatically go into pairing mode when turned on.The earbuds must first of all connect to each other before connecting to the Bluetooth device. Activate the Bluetooth function of your device, then select”TNB FEAT”.
When you use the earbuds for the first time, the indicator lights of the earbuds will flash alterna-tely blue and red. This means they are in pairing mode. As soon as they have paired, the indicator light of one of the earbuds will go off, and light of the other earbud will flash alternately blue and red. Once the earbuds are connected to your device, a voice will say”connected”, then the indicator lights of both earbuds will switch off.
Once paired for the first time, the earbuds will automatically connect with each other as soon as they are taken out of the case.
TURNING OFF THE EARBUDS
- Put the earbuds back in their case; they will automatically turn off and start charging.
- Press the button on the Bluetooth touch control for 3 seconds.
FUNCTIONS
– Play/pause: press the multifunction button once. Press it again to restart
the music.
– Volume control: Press the left earbud twice to decrease the volume/press the
right earbud twice to increase the volume.
– Changing tracks: Press the left earbud for 2 seconds to go back to the
previous track/the right earbud for 2 seconds to skip to the next track.
– Picking up/hanging up a call: if you receive a call, the music will switch
off automatically. Press the multifunction button of the earbud once to pick
up, then do the same again to hang up. When the call is over, your music will
resume automatically.
– Rejecting a call: press the multifunction button of either of the earbuds
for 2 seconds.
– Voice assistant: press one of the earbuds three times.
FUNCTIONS
Bluetooth: 5.3
Touch control
Maximum range: 10 m
Type of battery: lithium-ion polymer
Battery capacity: 30 mAh per earbud/180 mAh for the charging case
Sensitivity: 100 dB
Impedance: 32 Ohms
Recharging: USB-C cable, included
Total earbud autonomy: 10 hours at 50% of the maximum volume
Frequency range: 20 – 20,000 Hz
NEED HELP?
Concerned about the satisfaction of our customers, you can contact us at info@t-nb.com. Maintenance, troubleshooting, miscellaneous information about this product, please visit our website: www.t-nb.com
| Direct current
To indicate on the rating plate that the equipment is suitable for direct
current only; to identify relevant terminals.
---|---
| Prolonged listening at full volume can damage the user’s ear.
T’nB SA France / Rue Nicolas Joseph Cugnot
PA de La Crau / 13300 Salon-de-Provence
OTICE_EBFEATWH3.indd 02/02/2023 12:4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>