VEVOR ZWE-DDJ-SS-09 Height Adjustable Desk User Manual

VEVOR ZWE-DDJ-SS-09 Height Adjustable Desk

Product Information

This product is a lifting flat table designed to provide a flat, level, and hard surface for various applications. It is made of steel and board, with a brown and black color scheme. The dimensions of the table are 1200mm (length) x 600mm (width) x 1145mm (height). The net weight of the table is 25.45kg, while the gross weight is 28.35kg.

Product Usage Instructions

Please follow these instructions carefully to ensure safe and proper usage of the lifting flat table:

• Assembly Precautions:
  • Assemble the table according to the provided instructions to avoid hazards.
  • Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
  • Ensure that the assembly area is clean, well-lit, and free from bystanders.
  • Do not assemble the table when tired or under the influence of alcohol, drugs, or medication.
  • The product capabilities apply only to properly and completely assembled products.
  • Assemble the table on a flat, level, hard, and smooth surface capable of safely supporting it.
  • Refer to the Assembly Diagram in the manual for additional information about the parts.
• Use Precautions:
  • This product is not a toy. Keep it away from children.
  • Use the table as intended and do not sit or stand on it.
  • Inspect the table before every use and do not use it if any parts are loose or damaged.
  • Use the table only on flat, level, and hard surfaces.
• Height Adjustment and Controller Operation:
  • Use the UP and DOWN keys on the controller to adjust the height of the table.
  • The controller also features Memory Keys for preset height settings.
  • Refer to the LED Display on the controller for height information.

WARNING:
Please read this manual carefully before using the product. Failure to do so may result in serious injury. SAVE THIS MANUAL

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Lifting Flat Table.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts on a clear work area.

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy. Do not allow children to play with or approach this item.
2. Use as intended only. Do not sit or stand on the table.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Use only on flat, level, and hard surfaces.

TECHNICAL SPECIFICATIONS

Product Dimensions

(L x W x H)

| ****

1200 x 600 x 1145 mm

Packing Size

(L x W x H)

| 1275 x 670 x 95 mm
Net Weight (kg)| 25.45
Gross Weight (kg)| 28.35

PACKAGE CONTENTS

ASSEMBLY STEPS

Controller Operation

Height Adjustment Controller Operation

• LED Display:
  Press any key once to wake up the LED display.

• UP Key:
  Press and hold the UP key to raise the desk.

• Down Key:
  Press and hold the DOWN key to lower the desk.

• Memory Key:

You must complete the Initialization Process to reset your desk before using it f or the first time.

Detailed Introduction

Detailed introduction of key functions

• Reset
  After running to the lowest height position, press and hold for 7 seconds. When the LED screen “rst” and “E-1” flash alternately, release the ↓ key, and press and hold the key again. After the desktop runs down to the lowest mechanical zero point, go back 5mm, the LED screen displays the lowest height value, and the reset is completed.

• Set memory height
  Press the S key once, and the height value will start flashing. At this time, press the 1, 2, and 3 keys to save the current height to the corresponding position.

• Execute memory height
  In normal state, press the number key to call up its corresponding height, and the lifting table will automatically run to the corresponding position.

• Lock key
  Press and hold the S key for 3 seconds. When the LED screen displays “SET”, learn to open the S key. Press the number key 3 to enter the lock screen state. At this time, the LED screen flashes and displays “OFF”. When the screen is locked, press and hold the S key for 3s, and the LED screen displays the height value. At this time, release the S key to complete the unlocking.
  Restore factory settings
  Press and hold the S key for 9 seconds, release the S key when the LED screen displays “FAC”, and operate the S key again to restore the factory settings.

Error Code Instructions

COMPLETION

CONTACT

• Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
• Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E
• RANCHO CUCAMONGA, California, 91730 United States of America
• SHUNSHUN GmbH
• Römeräcker 9 Z2021,76351
• Linkenheim-Hochstetten,Germany
• Pooledas Group Ltd
• Unit 5 Albert Edward House, The Pavilions
• Preston, United Kingdom
• Support and E-Warranty Certificate https://www.vevor.com/support.
• NEED HELP? CONTACT US!
• Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com.

MODEL NO.: ZWE-DDJ-SS-09, ZWE-DDJ-SS-10
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands. This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

References

• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>