FUJIFILM XF35mmF2 R WR Lens Owner’s Manual

FUJIFILM XF35mmF2 R WR Lens

Product information

The Fujinon Lens XF35mmF2 R WR and XF23mmF2 R WR are interchangeable lenses designed for use with Fujifilm cameras. These lenses provide high-quality image-capturing capabilities and are suitable for various photography applications.

Specifications:

• Lens Model: XF35mmF2 R WR
• Focal Length: 35mm
• 35mm Equivalent Focal Length: 53mm
• Maximum Aperture: F2
• Minimum Aperture: F16
• Minimum Focus Distance: 35cm
• Filter Size: 43mm
• Weight: 170g
• Lens Model: XF23mmF2 R WR
• Focal Length: 23mm
• 35mm Equivalent Focal Length: 35mm
• Maximum Aperture: F2
• Minimum Aperture: F16
• Minimum Focus Distance: 22cm
• Filter Size: 43mm
• Weight: 180g

Product Usage Instructions

Safety precautions:

• WARNING: Do not immerse the lens in water or expose it to water. This can cause fire or electric shock. Do not use the lens in the bathroom or shower.
• CAUTION: Do not disassemble the lens or open the case. This can cause fire, electric shock, or injury due to product malfunction.
• CAUTION: If the lens case breaks open, do not touch the exposed parts. This can result in electric shock or injury. Take the lens to the point of purchase for consultation.
• WARNING: Do not place the lens on unstable surfaces. It may fall and cause injury. Avoid viewing the sun directly through the lens or camera viewfinders to prevent permanent visual impairment.
• CAUTION: Do not use or store the lens in locations exposed to steam, smoke, high humidity, or extreme dust. This can cause fire or electric shock. Avoid leaving the lens in direct sunlight or in locations with very high temperatures.
• CAUTION: Keep the lens out of the reach of small children to prevent injury.
• CAUTION: Do not handle the lens with wet hands to avoid electric shock.
• CAUTION: When shooting backlit subjects, keep the sun out of the frame to prevent fire or burns caused by sunlight focused on the camera.

For Your Safety

Be sure to read these notes before use

Safety Notes
Thank you for your purchase of this product. For repair, inspection, and internal testing, contact your FUJIFILM dealer.

• Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.

About the Icons
The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.

• WARNING
  This icon indicates that death or serious injury can result if the information is ignored.

• CAUTION
  This icon indicates that personal injury or material damage can result if the information is ignored.

The icons shown below are used to indicate the nature of the instructions which are to be observed.

• Triangular icons tell you that this information requires attention (“Important”).
• Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
• Filled circles with an exclamation mark indicate an action that must be performed (“Required”).

WARNING

• Do not use it in the bathroom or shower

  • Do not immerse in or expose to water. Failure to observe this precaution can cause a fire or electric shock.

• Do not disassemble

  • Do not disassemble (do not open the case). Failure to observe this precaution can cause fire, electric shock, or injury due to product malfunction.

• Do not touch internal parts

  • Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the camera battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation.

• Do not place on unstable surfaces. The product may fall, causing injury.

• Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause permanent visual impairment.

CAUTION

• Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fire or electric shock.
• Do not leave in direct sunlight or in locations subject to very high temperatures, such as in a closed vehicle on a sunny day. Failure to observe this precaution can cause a fire.
• Keep out of the reach of small children. This product could cause injury in the hands of a child.
• Do not handle it with wet hands. Failure to observe this precaution can cause electric shock.
• Keep the sun out of the frame when shooting backlit subjects. Sunlight focused on the camera when the sun is in or close to the frame can cause fire or burns.
• When the product is not in use, replace the lens caps and store them out of direct sunlight. Sunlight focused by the lens can cause fire or burns.
• Do not carry the camera or lens while they are attached to a tripod. The product can fall or strike other objects, causing injury.

For Customers in the U. S. A.

Tested To Comply With FCC Standards FOR HOME OR OFFICE USE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment.

Notes on the Grant:
To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord.

For Customers in Canada

CAN ICES-3 (B)/NMB-3(B)

CAUTION:
This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water (excluding waterproof products).
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disposal of Electrical and Electronic Equipment in Private Households

In the European Union, Norway, Iceland and Liechtenstein:
This symbol on the product, in the manual in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead, it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.

• By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of the product.
• The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

In Countries Outside the European Union, Norway, Iceland and Liechtenstein:
If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal.

Before Using This Product

Some lens features are not available with older versions of the camera firmware. Be sure to update the camera firmware to the latest version. Instructions on viewing the camera firmware version and updating camera firmware are available from the following websites:

http://www.fujifilm.com/support/digital_cameras/software/#firmware

If you do not have access to a computer, support is available from the local distributor listed in the “FUJIFILM Worldwide Network” material provided with your camera.

Product Care

• When using a lens hood, do not pick up or hold the camera using only the hood.
• Keep the lens signal contacts clean.
• Use a blower to remove dust and lint from the glass surfaces of the lens or filter. To remove smudges and fingerprints, apply a small amount of lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• Attach the front and rear caps when the lens is not in use.
• Store the lens and filter in cool, dry locations to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting can cause irreparable damage. Wipe off rain and water droplets.
• Leaving the lens in extremely hot locations could cause damage or warping.

Parts of the Lens

XF35mmF2 R WR/XF23mmF2 R WR

1. Lens hood (XF35mmF2 R WR)
2. Lens hood (XF23mmF2 R WR)
3. Focus ring
4. Aperture ring
5. Mounting marks (focal length)
6. Lens signal contacts
7. Front lens cap
8. Rear lens cap

The lens mount includes a rubber ring to ensure that the lens remains dust- and splash-proof. The ring can be replaced for a fee at any FUJIFILM service center.

Supplied Accessories

• Front lens cap
• Rear lens cap
• Lens hood
• Cloth wrapping

Attaching the Lens

See the camera manual for information on attaching and removing lenses. Note that this product is not compatible with X-mount film cameras.

Removing the Caps

Remove the caps as shown.

Aperture ring

At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M).

Attaching the Hood

When attached, lens hoods reduce glare and protect the front lens element.

XF35mmF2 R WR

XF23mmF2 R WR
The lens cap attaches to the hood when the hood is in place.

You may not be able to attach the hood over thick lens filters. Thin filters are recommended.

Warning
If you attach the hood too tightly after attaching a filter to the lens, the filter may remain stuck to the hood when the hood is removed. Do not attempt to forcibly separate the hood and fi lter, as the fi lter threads could injure your hands. Cover both the hood and fi lter with silicone jar openers or the like and unscrew them us-ing the palms of your hands.

Specifications

elements in 6 groups (includes 2 aspherical elements)
Focal length (35 mm format equivalent)| f=35 mm (53 mm)| f=23 mm (35 mm)
Angle of view| 44.2°| 63.4°
Max. aperture| f/2| f/2
Min. aperture| f/16| f/16
Aperture control

Number of blades Stop size

|

9 (rounded diaphragm opening) 1⁄3 EV (19 stops)

|

9 (rounded diaphragm opening) 1⁄3 EV (19 stops)

Focus range| 35 cm – infinity| 22 cm – infinity
Max. magnification| 0.135 ×| 0.13 ×
External dimensions: Diameter × Length* (approx.)

• distance from camera lens mount flange

| ⌀60 × 45.9 mm| ⌀60 × 51.9 mm
Weight* (approx.)

• excluding caps and hoods

| 170 g| 180 g
Filter size| ⌀43 mm| ⌀43 mm

• Improvements may result in unannounced changes to specifications and appearance.
• Owing to how this lens is constructed, the “Distance indicator” displayed by the camera may in some cases differ from the actual focus distance. Use the “Distance indicator” as a guide only.

FUJIFILM Corporation
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN.

References

• サポート情報 | 富士フイルム Xシリーズ & GFX
• Support | FUJIFILM X Series & GFX - Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>