VEVOR KJ2118-PS-BLK Passage Door Handle Instruction Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR KJ2118-PS-BLK Passage Door Handle
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product.
INSTRUCTIONS TO USE
-
Recommendation: 965mm (38″) from the floor.
-
Drill the hole into the door.
-
Drill the hole into the door edge.
-
Cut the hole for the faceplate on the door edge.
-
Trace the hole for strike plate on door jamb.
-
Drill the hole into the door jamb for the strike plate.
-
Cut the hole for the strike plate on door jamb.
FURTHUR INSTRUCTIONS
-
Reverse the levers if necessary. Unscrew the set screw to take off the lever.
-
This handle part should be installed interior side of the door.
-
Optional
TEMPLATE
Technical Support and E-Warranty Certificate
www.vevor.com/support
We continue to be committed to provide you tools with competitive price. “Save Half’, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.