HYUNDAI FOB-4F81M44 Remote Keyless System Instructions

Manual for vehicle manufacturer
Model name: FOB-4F81M44

OUTLINE

How to use FOB-4F81M44
‐ FOB-4F81M44 is a part of Remote Keyless System.
‐ This unit controls door lock/door unlock/tail gate open/panic/trunk open/remote engine start-stop/forward/backward wirelessly.

1. Introduction of Transmitter (FOB-4F81M44)
   – These units use the battery
   ‐ Frequency is 433.92MHz

GENERAL DESCRIPTION

PRIMARY FUNCTION

• Remote  door lock/unlock/tail gate/panic
• Operating voltage: 3V DC
• Center freq.: 433.92MHz

MANUAL

1. LOCK Button
   If the LOCK button is pressed, then TRANSMITTER sends the LOCK data.

2. UNLOCK Button
   If the UNLOCK button is pressed, then TRANSMITTER sends the UNLOCK data.

3. Tail gate Button
   If the Tail gate  button is pressed, then TRANSMITTER sends Tail gate open data.

4. HOLD Button
   If the HOLD button is pressed, then TRANSMITTER sends the HOLD data.

5. FORWARD Button
   If the FORWARD button is pressed, then TRANSMITTER sends the FORWARD data.

6. BACKWARD Button
   If the BACKWARD button is pressed, then TRANSMITTER sends BACKWARD data.

FCC/ISED NOTICE
[FCC]
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution:  Any changes or modifications to this device not explicitly approved by manufacturer could avoid your authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC
[ISED]
This device contains licence‐exempt transmitter(s)/receiver(s) that comply withInnovation, Science and Economic DevelopmentCanada’s licence‐exempt RSS(s). Operation is subject to the following two conditions:
1.This device may not cause interference.
2.This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the ISED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>