HYUNDAI HYUWSSENZOR43 WS Weather Station Sensor Instruction Manual
- June 13, 2024
- HYUNDAI
Table of Contents
HYUNDAI HYUWSSENZOR43 WS Weather Station Sensor
Product Information
The WS SENZOR 43 is an outdoor sensor that is designed to transmit temperature and humidity readings to a receiver. It is equipped with various features and components to ensure accurate and reliable data transmission.
Components
- C1 : Transmission Indication LED
- C2 : Temperature display
- C3 : Humidity display
- C4 : Wall mount hole
- C5 : RESET button
- C6 : Battery compartment
- C7 : Cable probe
Specifications
- Transmission frequency : 433.92 MHz
- ERP (Effective Radiated Power ): 0.104 mW
Safety Precautions
To avoid suffocation, keep the plastic bag away from babies and children.
Do not use this bag in cribs, beds, carriages, or playpens. The bag is not a
toy.
Disposal of Old Electrical & Electronic Equipment
If you are located in the European Union or other European countries with
separate collection systems, please follow the applicable regulations for the
disposal of old electrical and electronic equipment.
Manufacturer Information
The product is licensed by Hyundai Corporation Holdings, Korea. For more
information regarding the device and service, please visit our website at www
.hyundai-electronics.pl.
Product Usage Instructions
Getting Started
- Open the battery compartment located behind the back cover of the thermo sensor.
- Insert 2 x AA batteries into the compartment, observing the polarity [+ and – marks].
Installation
The remote sensor can be placed on any flat surface or securely mounted
onto a horizontal surface using the wall mount hole.
Note: For optimal transmission, ensure there are no interfering obstacles such as buildings, trees, vehicles, or high voltage lines in the open area between the receiver and transmitter. The maximum transmission range is up to 70 meters.
For detailed operating instructions and additional information, please refer to the user manual provided with the product.
INTRODUCTION
Thank you for buying our product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference.
Outdoor Sensor
- C1 : Transmission Indication LED
- C2 : Temperature display
- C3 : Humidity display
- C4 : Wall mount hole
- C5 : “RESET” button
- C6 : Battery compartment C7: Cable probe
Getting Started
Batteries compartment of thermo sensor is locating behind the back cover.
Insert 2 x AA batteries observing polarity [“+” and “−” marks]
Installation
The remote sensor should be placed onto flat surface or securely mounted
onto a horizontal surface.
Note: Transmissions between receiver and transmitter can reach up to 70 m in open area.
- Open Are a: there are no interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc
The use of 1,5 m cord Temperature Probe
- Insert the probe plug into the jack on the outdoor sensor.
- Put the cable outside and leave the Thermo Sensor Unit indoor to avoid freezing up the battery when the outdoor temperature is below −20 °C.
- Always use the temperature probe to sense the temperature when the temperature is between the following range: −50 °C ~ 0 °C and +50 °C ~ +70 °C
Specifications
- 433,92 MHz RF transmitting frequency, ERP 0,104 mW
We reserve the right to change technical specifications.
TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC BAG AWAY FROM BABIES AND
CHILDREN. DO NOT USE THIS BAG IN
CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.
Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact
your local Civic Office, your household waste disposal service or the shop
where you purchased the product.
Hereby, ETA a.s. declares that the radio equipment type WSSENZOR43 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.hyundai-electronics.cz/declaration_of_conformity
References
- Declaration of conformity– Hyundai CZ
- Hyundai Electronics– Hyundai CZ
- Hyundai electronics– Hyundai HU
- Hyundai electronics– Hyundai PL
- Hyundai Electronics– Hyundai SK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>