ANKER PowerPort III 3 Port 65W Pod Dock User Manual

ANKER PowerPort III 3 Port 65W Pod Dock

Product Information

• Product Name: PowerPort III 3-Port 65W Pod
• Product Number: A2667 51005002916 V01
• Manufacturer: Anker Innovations Limited

Product Usage Instructions

1. Before using the product, read all the instructions in the user manual.
2. The product has three ports: C1, C2, and USB-A.
3. To connect a device using USB-C, use either C1 or C2 port.
4. To connect a device using USB-A, use the USB-A port.
5. For more information and FAQs, visit the support page on anker.com/support.
6. To dispose of the product in case of failure or component defect, contact customer support or follow the disposal guidelines provided by local authorities.
7. This product is for indoor use only and should not be treated as household waste. Please recycle it at the applicable collection point for electrical and electronic equipment recycling.

Attention

Read all the instructions before using the product.

• The product is designed for use with IT equipment only.
• The maximum ambient temperature during use of the appliance must not exceed 25°C.
• Naked flame sources, such as candles, must not be placed on the product.
• The disconnection from line voltage is made by AC plug.
• In case of broken plugs, the product must be disposed of.
• If you want to clean the product, only use a dry cloth or brush.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).

Using Your Product

For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 (800) 988 79733
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

IC Statement

• This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2667 is in compliance with Directive 2014/35/EU & 2014/30/ EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.
Hereby, Anker Innovations Limited declares that the product type A2667 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address:  https://www.anker.com.

• Indoor use only
• This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Anker Innovations Limited

• Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,
• Hong Kong
• Anker Innovations Deutschland GmbH
• Georg-Muche-Strasse 3, 80807 Munich, Germany
• Anker Technology (UK) Ltd
• Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA,
• United Kingdom

Specifications

• Input: 100-240V～1.8A 50-60Hz
• Use One Port: USB-C1 / USB-C2 :
  • 5.0V 3.0A / 9.0V 3.0A / 15.0V 3.0A
  • 20.0V 3.25A (65.0W Max)
  • PPS: 3.3V-16.0V 3.25A Max (52.0W Max)
  • USB-A: 4.5V 5.0A / 5.0V 4.0A / 5.0V 4.5A
  • 5.0V 3.0A / 9.0V 2.0A / 12.0V 1.5A (22.5W Max)
• Output: Use Two Ports:
  • USB-C1 + USB-C2 :
  • USB-C1: 5.0V 3.0A / 9.0V 3.0A / 15.0V 3.0A
  • 20.0V 2.25A (45.0W Max)
  • PPS: 3.3V-16.0V 3.0A Max (45.0W Max)
  • USB-C2: 5.0V 3.0A / 9.0V 2.22A (20.0W Max)
  • USB-C1 + USB-A:
  • USB-C1: 5.0V 3.0A / 9.0V 3.0A / 15.0V 2.67A
  • 20.0V 2.0A (40.0W Max)
  • PPS: 3.3V-16.0V 2.65A Max (40.0W Max)
  • USB-A: 4.5V 5.0A / 5.0V 4.0A / 5.0V 4.5A / 5.0V 3.0A
  • 9.0V 2.0A / 12.0V 1.5A (22.5W Max)
  • USB-C2 + USB-A: 24.0W Max
• Output: Use Three Ports:
  • USB1 + USB2 + USB3:
  • USB-C1: 5.0V 3.0A / 9.0V 3.0A / 15.0V 2.67A
  • 20.0V 2.0A (40W Max)
  • PPS: 3.3V-16.0V 2.65A Max (40.0W Max)
  • USB-C2 + USB-A: 12.0W Max Per Port
  • Total Output : 65.0W Max
• Average active efficiency JP: 81.95%
• Efficiency at low load (10%) JP: 64.35%
• No-load power consumption JP: 0.23W

Customer Service

• 18-month limited warranty *
• Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
• Lifetime technical support
• support@anker.com.
• support.mea@anker.com (For Middle East and Africa Only)
• (US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT)
• (UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00
• (DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00
• (Middle East & Africa) +971 42463266 Sun-Thu 9:00 – 17:30
• (UAE) +971 8000320817 Sun-Thu 9:00 – 17:30
• (KSA) +966 8008500030 Sun-Thu 8:00 – 16:30
• (Kuwait) +965 22069086 Sun-Thu 8:00 – 16:30
• (Egypt) +20 8000000826 Sun-Thu 7:00 – 15:30
• (AU) +61 3 8331 4800 Mon-Fri 8:30 – 17:00 (AEST)
• (TR) +90 0850 460 14 14 Mon-Fri 9:00 – 18:00
• (RU) +8 (800) 511-86-23 Mon-Fri 9:00 – 18:00 (MSK)

For FAQs and more information, please visit

• anker.com/support.
• @anker_official @anker_jp
• @Anker Deutschland @Anker Japan @Anker
• @AnkerOfficial @Anker_JP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>