FUJIFILM BL00005148-101 Fujinon XF56mm WR Lens Owner’s Manual
- June 13, 2024
- Fujifilm
Table of Contents
BL00005148-101
FUJINON LENS
XF56mmF1.2 R WR
OWNER’S MANUAL
For Your Safety
Be sure to read these notes before use
Safety Notes
Thank you for your purchase of this product. For repair, inspection, and internal testing, contact your Fujifilm dealer.
- Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use.
- After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.
WARNING
| This icon indicates that death or serious injury can result if the
information is ignored.
---|---
CAUTION
| This icon indicates that personal injury or material damage can result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
| Triangular icons tell you that this information requires attention
(“Important”).
---|---
| Circular icons with a diagonal bar tell you that the action indicated is
prohibited (“Prohibited”).
| Filled circles with an exclamation mark indicate an action that must be
performed (“Required”).
WARNING
Do not use in the bathroom or shower
| Do not immerse in or expose to water. Failure to observe this precaution can cause a fire or electric shock.
Do not disassemble
| Do not disassemble. Failure to observe this precaution can cause fire, electric shock, or injury due to product malfunction.
Do not touch internal parts
| Should the case break open as the result of a fall or other accident, do
not touch the exposed parts. Failure to observe this precaution could result
in electric shock or in injury from touching the damaged parts. Remove the
camera battery immediately, taking care to avoid injury or electric shock, and
take the product to the point of purchase for consultation.
| Do not place on unstable surfaces. The product may fall, causing
injury.
| Do not view the sun through the lens or camera view finders. Failure to
observe this precaution can cause permanent visual impairment.
CAUTION
| Do not use or store in locations that are exposed to steam, or smoke or
are very humid or extremely dusty. Failure to observe this precaution can
cause fire or electric shock.
| Do not leave in direct sunlight or in locations subject to very high
temperatures, such as in a closed vehicle on a sunny day. Failure to observe
this precaution can cause fire.
| Keep out of the reach of small children. This product could cause
injury in the hands of a child.
| Do not handle with wet hands. Failure to observe this precaution can
cause electric shock.
**| Keep the sun out of the frame when shooting backlit subjects.
Sunlight focused into the camera when the sun is in or close to the frame can
cause fire or burns.
**| When the product is not in use, replace the lens caps and store out
of direct sunlight. Sunlight focused by the lens can cause fire or burns.
| Do not carry the camera or lens while they are attached to a tripod.
The product can fall or strike other objects, causing injury.
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment.
Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord.
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water (excluding waterproof products).
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and Liechtenstein: This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal.
U.K. Importer:
FUJIFILM UK Limited
Fujifilm House, Whitbread Way, Bedford,
Bedfordshire, MK42 0ZE, United Kingdom
EU Importer:
FUJIFILM Electronic Imaging Europe GmbH
Fujistrasse 1 47533 Kleve, Germany
Australian RCM
Before Using This Product
The lens may not perform as expected and some features may not be available with outdated lens or camera firmware. Be sure to update the lens and camera firmware to the latest versions. Instructions on viewing firmware version information and updating firmware are available from the following website:
https://fujifilm-x.com/support/download/firmware/
If you do not have access to a computer, support is available from the local distributor listed in the “FUJIFILM Worldwide Network” material provided with your camera.
Product Care
- When using a lens hood, do not pick up or hold the camera using only the hood.
- Keep the lens signal contacts clean.
- Use a blower to remove dust and lint from the glass surfaces of the lens or filter. To remove smudges and fingerprints, apply a small amount of lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers.
- Never use organic solvents such as paint thinner or benzene to clean the lens.
- Attach the front and rear caps when the lens is not in use.
- Store the lens and filter in cool, dry locations to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.
- Keep the lens dry. Rusting can cause irreparable damage. Wipe off rain and water droplets.
- Leaving the lens in extremely hot locations could cause damage or warping.
Parts of the Lens
XF56mmF1.2 R WR
- Lens hood
- Mounting marks
- Focus ring
- Aperture ring lock release
- Mounting marks (focal length)
- Aperture ring
- Lens signal contacts
- Front lens cap
- Rear lens cap
The lens mount includes a rubber ring to ensure that the lens remains dust- and splash-proof. The ring can be replaced for a fee at any Fujifilm service center.
Attaching the Lens
See the camera manual for information on attaching and removing lenses.
This product is for use exclusively with the FUJIFILM X mount. It is not compatible with the G mount or with X mount film cameras.
Removing the Caps
Remove the caps as shown.
Attaching the Hood
When attached, lens hoods reduce glare and protect the front lens element.
Supplied Accessories
- Front lens cap
- Rear lens cap
- Lens hood
- Lens wrapping cloth
The Aperture Ring
Rotate the lens aperture ring to choose the aperture (f-number).
(1) A ( ): Set aperture to the value chosen automatically by the
camera.
(2) Other values ( ): Set aperture to the selected value.
To select A , or to select another value after selecting A , press the aperture ring lock release while rotating the aperture ring.
- Aperture ring lock release
- Aperture ring
Specifications
| Type | XF56mmF1.2 R WR |
|---|---|
| Lens construction | 13 elements in 8 groups (2 aspherical elements, 1 ED |
element)
Focal length (35 mm format equivalent)| f=56 mm (85mm)
Angle of view| 28.5°
Max. aperture| f/1.2
Min. aperture| f/16
Aperture control
Number of blades
Stop size
| 11 (rounded diaphragm opening)
1⁄3 EV (23 stops)
Minimum focus distance (measured from focal plane)| 0.5 m
Max. magnification| 0.14 ×
External dimensions: Diameter × Length (approx.) distance from front
of lens to lens mount fl ange| ⌀79.4 × 76 mm
Weight** (approx.) excluding caps and hoods| 445 g
Filter size**| ⌀67 mm
Improvements may result in unannounced changes to specifications and
appearance.
Owing to how this lens is constructed, the “Distance indicator” displayed by
the camera may in some cases differ from the actual focus distance. Use the
“Distance indicator” as a guide only.
FUJIFILM Corporation
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO
107-0052, JAPAN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>