VEVOR T35K Portable Car Refrigerator Freezer Compressor User Manual

VEVOR T35K Portable Car Refrigerator Freezer Compressor

Product Information

The Car Refrigerator is a portable cooling device designed for use in cars. It is available in three models: T35K, T45K, and T55K. The refrigerator is manufactured by VEVOR, a company committed to providing tools at competitive prices.
Please note that the expressions “Save Half”, “Half Price”, or similar phrases used by the company represent an estimate of the potential savings compared to major top brands. It does not imply coverage of all tool categories offered by VEVOR. It is recommended to verify carefully before placing an order to ensure the expected savings.
The appearance of the product may vary from the images shown in the manual. VEVOR reserves the right to interpret their user manual and will not inform customers of any technology or software updates unless explicitly stated.
This product complies with European Directive 2012/19/EU. The symbol of a crossed-out wheelie bin indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with the same symbol. Please do not discard these items with normal domestic waste; instead, take them to a designated collection point for recycling electrical and electronic devices.

Technical Support and Warranty
If you have any product questions or require technical support, please contact VEVOR through email at [email protected].

Usage Instructions

Connect the Power Supply

1. Locate the DC power cord in the kit.
2. Connect the DC plug to the power outlet of the car refrigerator.
3. Place the refrigerators properly in the car (e.g., back-up, seats).
4. Lay out the power cords according to your car’s interior space.
5. Insert the cigarette lighter plug (one side of the power cord) into the car cigarette lighter hole.
6. Press and hold the ON/OFF button for 3 seconds to turn on the car refrigerator.

Adapter
The product can be connected to more than one power supply. The onboard refrigerator is directly connected to a DC12V/24V power supply. Additionally, the car refrigerator is equipped with an AC100-240V AC adapter, allowing it to be used at home with a voltage of AC100-240V.

Car Battery Protection
The onboard refrigerator features a built-in ECO electronic control module that monitors the vehicle battery voltage. It automatically disconnects the power supply before power consumption affects the standard ignition of the vehicle, ensuring that the vehicle battery power does not become too low to affect ignition.

Battery Voltage Reference

Note: When the power supply is connected and the refrigerator is  turned on, disconnecting or starting refers to disconnecting or  starting the compressor.

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us

[email protected]This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

This product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to acollection point for recycling electrical and electronic devices.

Attentions
Before using the refrigerator, please read this manual carefully and keep it properly.

1. Before using the refrigerator, clean it inside and outside with a damp cloth.
2. Do not fill the refrigerator with corrosive liquids. Do not directly pour liquids into the refrigerator.
3. When the refrigerator is not used for a long time, please disconnect the power supply and keep it dry.
4. Regularly clean the inner chamber to prevent odor and bacteria and ensure food safety.
5. This manual applies to T35K/T45K /T55K refrigerators (American and European markets).

Connect the Power Supply

1. Find the DC power cord in the kit. Connect DC plug to the power outlet of the car refrigerator.
2. Well place the refrigerators in the car (back-up, seats….).
3. Lay out power cords per your car’s interior space. Then, insert the cigarette lighter plug (one side of the power cord) into the car cigarette lighter hole.
4. Press “ON/OFF” for 3 seconds, and the car refrigerator can be turned on.

• Adapter
• Connect the car cigarette lighter
• Connect the car refrigerator

The product can be connected to more than one power supply.
The onboard refrigerator is directly connected to the DC12V/24V DC power supply.
The car refrigerator equipped with an AC100-240V AC adapter can be used at home with a voltage of AC100-240V.

Instructions

Car battery protection voltage reference
Built-in ECO electronic control module can automatically monitor the vehicle battery voltage. Before the power consumption affects the standard ignition of the vehicle, the onboard refrigerator will automatically disconnect the power supply to ensure that the vehicle battery power will not be too low to affect the standard ignition of the vehicle.

DC12.5V ON

| DC10.1V OFF

DC11.4V ON

| DC9.6V OFF

DC10.9V ON

DC24V| DC24.6V OFF

DC26.0V ON

| DC22.3V OFF

DC23.7V ON

| DC21.3V OFF

DC22.7V ON

---|---|---|---

Note: When the power supply is connected and the refrigerator is turned on, disconnecting or starting refers to disconnecting or starting the compressor.

Component Diagram

1. Cabinet
2. Classified plate
3. Case Cover
4. Door buckle
5. Sealing Strip
6. Control panel
7. Handle ( optional )
8. Wheel ( optional )
9. Power Interface

1. Setting for large compartment
2. large compartment
3. Setting button
4. Small compartment
5. Setting for small compartment
6. Cooling indicator
7. ON/OFF button
8. Max/Eco

Function Introduction
After power-on, the digital display screen will be fully lit for 1 second and displayed normally. The default is the last memory function. The display screen temperature figure will be permanently lit in the middle in standby mode.

Open and Close
After the power is turned on, the refrigerator will be in standby mode.
Now, press the ON/OFF button to open the refrigerator. After the refrigerator is opened, the display will show the current temperature of the storage room. It will start running.
Warning: The displayed temperature is only the temperature around the sensor. The temperature of different points in the storage room is different.
Therefore, this is normal if the displayed temperature differs from the measured temperature.
Press the ON/OFF button when the refrigerator is running, and the refrigerator will return to standby.

Temperature Setting

1. Switch on the fridge, press to raise the set temperature and to reduce the storage compartment’s temperature. Each press will change by 1 ℃, and the maximum can be set to 10 ℃, and the minimum can be set to – 20 ℃. Please note the clapboard shall be located in the correct position before the set temperature of the large compartment.
2. If the clapboard is removed from the compartment, the temperature display of the small compartment will be off. In this condition, there is only one storage compartment.
3. The temperature display will flash for 3 seconds and then fix the setting after adjusting the temperature and no more action on buttons. The setting temperature will be memorized, and the display will turn back to show the actual temperature of the storage compartment.
4. The default value for an initial startup is 0 ℃/32 ℉.

MAX / ECO Mode Conversion

• Directly press key to switch to MAX mode or ECO mode.
• MAX running mode : the fridge will work hard to reduce temperature fast.
• ECO running model: the fridge will work longer to reduce the temperature to save energy.

Celsius (° C)/Fahrenheit (° F) display switching
Press and hold the “+” key and the setting key on the left (large box) for over 3 seconds to switch.

Battery Protection Levels: H1 (High) N2 (Low) L3 (Medium)

Press key for 3s to enter the battery protection setting. Press the key again to switch H1 N2 L3 levels in turns.
If no operations were detected, the set level will flash for 3s, then exit and save the current setting.

Model Parameter Table

Model No.| Capa city| **** Voltage| **** AC

Power

| **** DC

Power

| Temper ature Adjust able| Plug type
---|---|---|---|---|---|---
T35K| ****

**** 35L

| AC100~24 0V

(50/60Hz) DC12V/24V

| **** Cooling

: 60W

| **** Coolin g

60W

| **** 50~-

4℉

| USA

plug DC

plug

**** T35K| **** 35L| AC100~24 0V

(50/60Hz)D C 12V/24V

| Cooling

: 60W

| **** Coolin g

60W

| **** 10~-

20

℃

| EU

plug DC

plug

---|---|---|---|---|---|---
**** T45K| **** 45L| AC 100~240V

(50/60Hz)D C 12V/24V

| **** Cooling

: 60W

| **** Coolin g:

60W

| ****

**** 50~-

4℉

| USA

plug DC

plug

**** T45K| **** 45L| AC 100~240V

(50/60Hz)D C 12V/24V

| **** Cooling

: 60W

| **** Coolin g:

60W

| **** 10~-

20

℃

| EU

plug DC

plug

T55K| **** 55L| AC 100~240V

(50/60Hz)D C 12V/24V

| **** Cooling

: 60W

| **** Coolin g:

60W

| **** 50~-

4℉

| USA

plug DC

plug

**** T55K| **** 55L| AC 100~240V

(50/60Hz)D C 12V/24V

| **** Cooling

: 60W

| **** Coolin g:

60W

| **** 10~-

20

℃

| EU

plug DC

plug

Notice for Temperature Setting
Insert the clapboard in the correct position of the storage compartment, and then switch on the fridge. The display will show the temperature of two storage compartments. When adjusting temperature, setting the temperature of the small compartment(TS) is not able to be higher than setting the temperature of the big compartment (TL).

TS ≤TL
For example, if the set temperature of the small compartment (TS ) to -10℃ (14 ℉), the range of setting temperature of the large compartment (TL) is from -10℃(14℉) to 10℃ (50℉).

• Tips: use a large compartment for fresh food and a small compartment for frozen food.

Power-off Memory Function
There is a power-off memory function for car refrigerators. When the power is lost, the working state (On/Off status, working mode, etc.) before power-off can be automatically recovered at the next startup; no need to set it again.

• ECO: Energy-saving cooling
• MAX: Powerful cooling

Use Clapboard

1. Align with two rails on inner liner.
2. Vertically push clapboard to bottom of liner.

Simple Fault Analysis
Advice: If abnormal situations cannot be resolved through a simple fault analysis, please get in touch with professional customer service for assistance.

Car Refrigerator Does Not Work

1. Check if the power is connected correctly. (check If the plug is loosened or positive and negative poles are reversed).
2. Check if the power switch on the operation panel is turned on.
3. Check if the cooling ventilation is normal.
4. Check if the fuse is blown.

Poor Cooling Performance

1. Check if the lid is closed correctly.
2. Check if the door seal is damaged or deformed.
3. Check if there is poor ventilation around the fridges.
4. Check if the temperature is set correctly.

Definition Of Error Codes On The Display

Abnormal Noise

1. The car refrigerator needs to be placed smoothly.
2. Touch a wall or other object.
3. There are parts loose or falling off inside.

Condensation on Refrigerator Surface
When the ambient air humidity exceeds 75%, slight condensation will occur on the box surface, which is normal.

Failures and Solutions

E1: Low Input Voltage

• Failure 1 : Insert the refrigerator power cord into the cigarette lighter before the car starts. Solution 1: Wait a while to connect the car after it starts.
• Failure 2 : The input voltage of the adapter is too low.
• Solution 2 : Adjust the battery protection level to middle-voltage or low-voltage. If it doesn’t work, please replace a new adapter.

E2: Fan Fault
Please replace a new fan when you identify there is a fan malfunction.

E3: Input Voltage Fault Due to Compressor Frequently Start
When the refrigerator is used in the car, and E3 appears, Please shut it down for 5 minutes and restart it.
If it doesn’t work, that can be identified to be El fault; please solve it according to the solution of El.
When the refrigerator is connecting with the adapter and E3 appearing

• Please adjust the battery protection level to the middle or low level.
• If it doesn’t work, please replace a new adapter.

E4: Low Rotational Speed of Compressor
Please adjust the input voltage and repower it.

E5: Overheating of Controller Chip
Please power off for 5 minutes and check if the lousy ventilation around the compressor causes the overheating.

Use Suggestions

1. If equipped with a backup battery, you can maintain any temperature you set under any circumstances without worries.
2. When placing ice cream, please adjust the temperature to the lowest; it must be powered on for a long time.
3. Prevent the health problems of drinking bottled water caused by high temperatures.
4. Frozen food, rare seafood, and vehicle-mounted refrigerators let frozen fresh food accompany the journey.
5. Healthcare products, insulin, and imported drugs need to be refrigerated, and the precise temperature control of onboard refrigerators will escort health along the way.
6. The tea leaves are effectively kept fresh in the car refrigerator, and you can drink fresh and delicious tea anytime during the self-driving tour.
7. The best storage temperature of red wine is 10 ℃ – 18 ℃ (50 – 64.4 ℉). The precise temperature control of the car refrigerator can effectively ensure the storage temperature of red wine.
8. The storage time of high-grade fruit in the car at high summer temperatures will be at least 2 hours. The storage time is shorter even if the air conditioner is turned on. Using a car refrigerator can effectively preserve high-grade fruit.
9. The coating of high-grade sunglasses will fall off under the high temperature in summer. The car refrigerator is an ideal place to place it.
10. High-grade cosmetics quickly deteriorate under high temperatures in the car. Carry cosmetics with the car; the car refrigerator will be your better choice.

Safety Precautions

1. Ensure that the power voltage connected to the onboard refrigerator is correct at any time (The parameters are labeled with the approved voltage parameters of the onboard refrigerator).
2. Do not pour liquid directly into the car refrigerator.
3. Modifying the refrigerator without permission is forbidden to avoid danger.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
5. Children should be supervised to avoid playing with the appliance.
6. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
7. To avoid a hazard due to the instability of the appliance, it must be fixed under the instructions.
8. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

WARNING: This appliance contains flammable foaming agent cyclopentane

1. Please avoid contact fire when you transport and use it.
2. Please ask a professional for servicing when the machine breaks down.
3. Please send it to your local appointed disposal station when you discard it.

WARNING: During use, service, and disposal of the appliance, please pay attention to a symbol similar to the left side, which is located on the rear of the appliance (rear panel or compressor) and with yellow or orange color. It’s a risk of fire warning symbol. There are flammable materials in refrigerant pipes and compressors. Please be far away fire source during use, service, and disposal.

Electrical Schematic Diagram

Technical Support and E-Warranty Certificate https://www.vevor.com/support

References

• Contact Us – Official VEVOR Support
• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>