VEVOR I Hanger Sliding Barn Door Hardware Closet Track Kit User Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR I Hanger Sliding Barn Door Hardware Closet Track Kit
Introduction
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Safety Instruction
WARNING:
Read this material before using this product. Failure to do so can result in serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Product capabilities apply to properly and completely assembled product only.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
- For safety reasons This hardware is recommended to be installed by 2 people
Use precautions
- This product is not a toy. Do not allow children to play with this item.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS
Installation Instruction
This hardware is recommended to be installed by 2 people , which can be easier and more efficient . Professional customer service team help you solve all installation problems in time , please feel free to contact us .
HARDWARE LIST
| 10ft Single Door
---|---
| 2PCS
| 7PCS
| M8x90 (7PCS)
****| Φ10×50（7PCS）
| ST4.2×25(2PCS)
| 1PCS
| Φ8（2PCS）
| 1PCS
| 1PCS
| 2PCS
| 1PCS
| 2PCS
****| 4PCS
Tools Required
Dimension
Assembly Instructions
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 Made In
China
Customers Support
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>