The Home Depot 3.5 ft Tall Halloween Inflatable Pumpkin Duo Stack Instructions

Table of Contents

The-Home-Depot-3-5-ft-Tall-Halloween-Inflatable-Pumpkin-Duo-Stack-
PRODUCT

The product is an air-blown inflatable figure designed for decorative purposes. It comes with stakes and ropes for securing it in place, a fan for inflation, and an adaptor for power supply. The product should not be used during strong winds to ensure safe operation. Additionally, precautions should be taken to protect the electric fan and power cord from exposure to water.
It is important to note that the product should not be connected to the power supply while still in its packaging. To avoid fire or shock hazards, the product should not be exposed to rain, moisture, or dust. It is also advised not to touch the inflatable if your hand is wet, and to only place it on a clean, dry surface free of snow, dirt, wetness, leaves, and other debris.
All included fixing coils must be used to ensure a secure position of the inflatable figure.

Before using the product, carefully read all instructions in the manual.
Ensure that there are no unusually strong winds before inflating the figure. If it becomes too windy, allow the inflatable to deflate and secure it until conditions improve.
Protect the electric fan and power cord from water exposure.
If the external flexible cable or cord is damaged, do not use it. Only a qualified technician should repair the damaged mainconnection cable.
Do not connect the product to the power supply while it is still in its packaging.
To prevent fire or shock hazards, do not expose the product to rain, moisture, or dust.
Avoid touching the inflatable if your hand is wet.
Place the inflatable figure only on a clean, dry surface that is free of snow, dirt, wetness, leaves, and other debris.
Ensure all included fixing coils are used to secure the inflatable figure in place.

If the motor of the product is not working, consider thefollowing:

Cleaning, Storage, and Maintenance Instructions

Follow these instructions to clean, store, and maintain the product:

Use a mild detergent with cold water to wipe clean the inflatable figure.
Leave the figure inflated until it is completely dry.
Unplug the power cord, roll up the inflatable figure, and store it in the original package or a similar size box.
Do not wipe clean the motor.

Note: This unit is not intended for use by children.

Important: Please read all instructions carefully before using this product.
Caution: Do not attempt to inflate during unusually strong wind. If it becomes too windy for safe operation, simply allow your inflatable to deflate, secure it, and wait for better condition.
Caution: Electricity and water are a bad combination. Protect the electric fan and power cord from exposure to water.
- If the external flexible cable or cord is damaged, please do not use it.
- The repair of the damaged main connection cable is only allowed for a qualified technician

Warning

Do not connect the chain to the supply while it is in the packaging.
To reduce the risk of fire or shock hazard, do not expose this product to rain, moisture or dust. In addition, do not touch the inflatable if your hand is wet.
Only place the decorative item on a clean, dry surface free of snow, dirt, wetness, leaves, and other debris.
All of the included fixing coils must be used to ensure a secure position.

Remove contents from the packaging. Please lay out the inflatable on a smooth surface.
Please be sure to check that the sealing zipper by the fan valve is closed.
Take the fan adaptor and plug it into the power source to begin inflation.
If using outdoors, use the ground stakes provided to insert into the ground. When fastening the ropes from the stakes to the inflatable, be sure to have the ropes taut.
When ready to deflate, unplug the power adaptor from the power source.
For the fastest deflation, unzip the sealing zipper by the fan valve.

Troubleshooting checklist

If the motor is not working, the operation may be…

The power source is interrupted or the cord may be unplugged. Debris may be lodged in the motor.
Ensure the zipper is securely closed so air stays inside the figure.

Cleaning, storage, and maintenance instructions