Club 3D CAC-1922 Notebook Laptop Power Car Charger Installation Guide
- June 13, 2024
- Club-3D
Table of Contents
Club 3D CAC-1922 Notebook Laptop Power Car Charger
Product Information
The CAC-1922 is a high-performance and fashionable car charger with a maximum output of 63 watts. It is equipped with two USB connectors (one USB Type-C connector and one USB Type-A connector) for power. This charger supports QC3.0 and Power Delivery (PD), making it feasible to charge any devices such as digital cameras, PDAs, notebook computers, mobile phones, and USB accessories in your car.
The USB-C port is specially designed for Type-C supported devices. The car charger has built-in safeguards including over-current protection, over- temperature protection, short-circuit protection, and overcharging protection (OCP-OTP-SCP-OVP) to protect your devices against excessive current, overcharging, and overheating.
Product Usage Instructions
- After unpacking the product, check for any damages. If any parts are missing or damaged, inform your supplier immediately.
- Plug the Car Charger into the car cigarette lighter socket (12-24Volt DC). The LED light on the charger will turn blue.
- Connect your device(s) to the output port for charging.
- Observe the LED light on the charger. It will turn blue for Quick Charge (QC) mode or red for Power Delivery (PD) mode.
- Once your electronic equipment is fully charged, unplug the car charger from the cigarette lighter socket.
Important Safety Instructions:
- Please pull the car charger out after use or when the car engine is turned off.
- Do not use the car charger with electronic products that have over-charging specifications to avoid specification mismatching.
- The car charger may become slightly overheated during use, which is normal. The temperature should be less than 60 degrees Celsius or 140 degrees Fahrenheit under normal room temperature.
- If the car charger stops working due to over-current, over-temperature, or short-circuit protection, unplug the device and check compatibility with the charger.
- Avoid placing the car charger close to fire or in liquid.
- Do not wash the car charger with corrosive cleaner.
- If the car charger does not work properly, contact your supplier for assistance.
CAC-1922 QUICK INSTALLATION GUIDE
Thank you for purchasing our CAC-1922 Product. After unpacking the product, please make sure you have all the items provided and checked for any damages. In case of any missing/damaged parts please inform your supplier immediately.
You should have:
- CAC-1922 Notebook / Laptop Power Car Charger 63 Watt
- QIG, Quick Installation Guide (or download link)
The Club 3D CAC-1922 is a high-performance and fashionable design max. 63Watt Car charger with QC3.0 and Power Delivery (PD) support. With this charger, it is feasible for you to charge any devices (eg: digital cameras, PDAs, notebook computer, mobile phones, USB accessories) with your car when it is in necessity. It is equipped with two USB connectors (one USB Type-C connector and one USB Type-A connector) for power. This product allows two devices to be charged at the same time, and the product provides the maximum output of 63 watts. The USB-C port is specially designed for Type-C supported devices.
Ensuring busy travelers can stay productive on the move without waiting around for hours. Built-in safeguards protect your devices against excessive current, overcharging and overheating(OCP-OTP-SCP-OVP).
Operation Procedures
- Plug the Car Charger into the car cigarette lighter, LED light turns blue.
- Connect your device(s) to the output port for charging.
- Observe LED light turns blue for Quick Charge(QC) or Red for Power Delivery(PD) mode.
- Please unplug the car charger after the electronic equipment is fully charged.
WARNING:
-
Please plug the car charger after starting the car.
-
Please pull the car charger out after use or car flameout.
Note: Our products have protection functions, and the two tips above are suggestions just for safety. -
Please make sure that you use USB cables with the correct Power rating ! ie 100 Watt or to be absolutely safe you can use Club 3D’s 240 Watt rated cables.
-
Do not use the car charger with electronic products which own over-charging specifications, so as to avoid any problems caused by specification mismatching.
-
Car charger will be a little overheated in the use process, and it’s a normal phenomenon that the temperature is less than 60 degree Celsius or 140 degree Fahrenheit under normal room temperature.
-
When the car charger stops working under over-current, over-temperature or short-circuit protection, please unplug the device after it automatically returns to work, then you need to check whether the device is compatible with this charger.
-
Do not let the car charger close to fire, such as stove, candles etc.
-
Do not let the car charger soak into liquid, such as swimming pool, bathtub, etc.
-
Do not wash the car charger with corrosive cleaner.
-
If the car charger cannot work properly, please contact your supplier from whom you purchased this product.
Warning Safe Usage – Product Only to be used at altitude 2000 meters/6562 feet and below.
INSTRUCTION
WARNING:
- A. Please plug the car charger after starting the car.
- B. Please pull the car charger out after use or car flameout.
Please use USB cables with the correct Power rating
Disclaimer: While we endeavour to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www.club- 3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.
Copyright © 2023, Club 3D B.V. www.club-3d.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>