Master MFG HDT-AC 60 Gallon Premium Trailer Sprayer Instruction Manual
- June 13, 2024
- MASTER MFG
Table of Contents
Master MFG HDT-AC 60 Gallon Premium Trailer Sprayer
Product Information
Product Name: Heavy-Duty Trailer Assembly HDT-AC
Components Included:
- Frame Assembly (1) – Part Number: 32-100041
- Axle (1) – Part Number: 32-100100
- Tongue (1) – Part Number: 32-100106
- 5/16-18 Flange Nut (12) – Part Number: 33-100113
- Washer (4) – Part Number: 33-100115
- 5/16-1 Hex Bolt (12) – Part Number: 32-100116
- Cotter Pin (2) – Part Number: 33-100127
- 3/8-16 Flange Nut (2) – Part Number: 33-100131
- 3/8-1 Hex Bolt (2) – Part Number: 33-200020
- Hitch Pin (1) – Part Number: 722HP
- Locking Hitch Pin (1) – Part Number: 905PA
- Wheel (2) – Part Number: TWA16X6.50-8
- Boom Mount (1) – Part Number: 32-100063
- Adjustable Hitch (1) – Part Number: 32-100066
Product Usage Instructions
Step 1: Assemble Trailer Tongue
- Align the holes on the Adjustable Hitch and Tongue.
- Insert 3/8 – 1 Hex Bolts and tighten with 3/8 Hex Nuts using a 9/16 Socket Wrench.
- Insert the Tongue into the Frame Assembly and secure with the 722HP Hitch Pin.
Step 2: Attach Axle and Wheels to Frame
- Align the holes in the axle plate with the holes in the back of the Frame Assembly.
- Secure with 5/16 – 1 Hex Bolts and 5/16 Flange Nuts.
- Tighten securely with a 1/2 Socket Wrench.
Step 3: Add Boom Mount to Frame Assembly
- Align the holes of the end of the Boom Mount to the holes on the rear of the Frame Assembly.
Step 4: Hitches Sprayer Tongue to Vehicle
- Stand the Sprayer up on its Wheels.
- Slide the Tongue over the open end of the Frame Assembly.
- Line up Tongue and Frame Assembly Holes.
- Insert Locking Hitch Pin through holes and close Lock Pin.
If you encounter any difficulties during assembly or have any questions, please call our support team at: 800.825.5397
TOOLS REQUIRED
NOTE:
IF YOU PURCHASED A COMPLETED BROADCAST SPRAYER, FOLLOW THE SPOT SPRAYER MANUAL
AND BOOM KIT ASSEMBLY INSTRUCTIONS BEFORE YOU COMPLETE THE FOLLOWING ASSEMBLY
STEPS.
INCLUDED COMPONENTS
PARTS
Align the holes on the Adjustable Hitch and Tongue. Insert 3/8” – 1” Hex Bolts and tighten with 3/8” Hex Nuts with 9/16” Socket Wrench. Then, insert the Tongue into the Frame Assembly and secure with the 722HP Hitch Pin.
Assembles Trailer Tongue
Align holes in axle plate with holes in back of Frame Assembly. Secure with 5/16” – 1” Hex Bolts and 5/16” Flange Nuts. Tighten securely with 1/2” Socket Wrench. Slide Wheels over Axle making sure Valve Stems are facing out away from the Frame Assembly. Insert Cotter Pins through the holes on each Axle. Use Pliers to bend the ends of the Cotter Pins, to ensure the Wheels can’t slide off the Axles.
Attaches Axle and Wheels to Frame
NOTE: Boom Mount has holes for installation of Boom Assembly. Reference
Boom Assembly Card for needed components to install.
Align the holes of the end of the Boom Mount to the holes on the rear of the
Frame Assembly. Secure Boom Mount with 5/16”-1” Hex Bolt, Washers, and Flange
Nuts. Tighten with ½” socket wrench. The washer needs to be installed on the
side with the slots.
Adds Boom Mount to Frame Assembly
Stand the Sprayer up on its Wheels. Slide the Tongue over the open end of the
Frame Assembly. Line up Tongue and Frame Assembly Holes. Insert Locking Hitch
Pin through holes and close Lock Pin.
NOTE: Follow your Boom Assembly Card to complete your boom before
finishing this step.
Hitches Sprayer Tongue to Vehicle
BREAKDOWN
| ID | Part Number | Description | Qty |
|---|---|---|---|
| 1 | 32-100041 | FRAME, TRAILER, 40/60GAL | 1 |
| 2 | 32-100063 | MOUNT, BOOM, 40&60 GAL | 1 |
| 3 | 32-100100 | TONGUE, FLEX FRAME, 40/60GAL | 1 |
| 4 | 32-100066 | HITCH, ADJ, 40 & 60 GALL | 1 |
| 5 | 32-100100 | AXEL, FLEX FRAME, 40/60GAL, 1″ | 1 |
| 6 | 722HP | KIT, BOLT, 40/60GAL TRAILER | 1 |
| 7 | TD-150 | CLAMP, TIE DOWN, 1.5″ STRAP, ZINC | 4 |
| 8 | 31-100160 | BRACKET, UPRIGHT, SPRAY BOOMS | 2 |
| 9 | TWA16X6.50-8 | TIRE WHEEL ASSY. 16X6.50-8 X 1″ SEALED AXLE BRG. | 2 |
| 10 | 33-103739 | Pad, Rubber, 1/8″ x 3″ x 25″, Anti-Slip | 2 |
| 11 | TDS1.5-67 | TIE DOWN STRAP, POLYESTER, BLACK, 1.5″x67″ | 2 |
| 12 | 33-200020 | BOLT, 3/8`-16 X 1″, HEX HEAD | 6 |
| 13 | 33-100113 | NUT, 5/16-18, SERRATED FLANGE | 8 |
| 14 | 33-100127 | COTTER PIN, 1/8″X1-1/2″ LONG | 2 |
| 15 | 33-100131 | NUT 3/8″, SERRATED FLANGE | 2 |
| 16 | 33-100115 | WASHER, 5/16″, ZINC PLATED | 4 |
| 17 | 33-100136 | NUT, NYLON LOCK, 3/8″ | 4 |
| 18 | 33-100116 | BOLT, 5/16-18 X 1″ | 12 |
| 19 | 905PA | PIN, LOCK FOR PTO ADAPTOR, 3/8″ PIN DIAMETER | 1 |