tecnare DMA-8X8 Commercial Amplifiers and Matrix Processors User Guide
- June 13, 2024
- tecnare
Table of Contents
tecnare DMA-8X8 Commercial Amplifiers and Matrix Processors User Guide
Overview
The DMA8X8 is a powerful 8×8 audio Matrix. Thanks to its high-performance 24-bit AD/DA converters and 32 -bit floating point SHARC 4th generation DSP, it provides superior sound performance. It features an Ethernet control via RJ45 cable or Wi-Fi using an external router.
Installation of Control Software “DSP Software” is required to configure the device for the first time. From that moment it can work in Stand alone.
If it is necessary to control the system in real time, it can be done from the Windows software itself, or through the APP available for Android and iOS mobile devices.
- Signal Input terminal: Signal input connectors are 3 position screw terminal block
- Signal Output terminal: Signal output connectors are 3 position screw terminal block.
- USB Audio Port: USB sound card (1-in-1-out), which can be used to play audio or for recording function.
- RS-232 Port: Used for the serial communication port Tx = sending or data output or Rx = receiving or data input that connects to a third-party control device. The Serial Port setting should comply with the following specifications: 115200 baud (default), 8 data bits, 1 stop bit, no parity, no flow control. RS-485 Port: Used as serial communication port A-B that’s connected to a third-party control device. The Port setting should comply with the following specifications: 115200 baud (default), 8 data bits, 1 stop bit, no parity, no flow control. GPIO Port: 6-bit 3.81mm terminal. 4 input/output contacts to be assigned to different functions.
- Ethernet Port (RJ45): 10/100 Base-T Ethernet connector is used for IP-based PC Software and host and third-party accessory controller.
- Main socket: 230 Vac / 50Hz; 40W
Software “DSP Software”
DSP_Software for DMA-8X8 can be downloaded for free on our website, from the following link:
https://www.tecnare.co/wp-content/uploads/2023/01/Tecnare-DMA_DSP_1_2.zip
ANDROID Control APP
The control APP for Android devices can be downloaded for free from the following link:
https://www.tecnare.co/wp-content/uploads/2022/12/DSPPro_2.3.20.apk_.zip
iOS Control APP
The control APP for iOS devices can be downloaded for free from the Apple Store as DSP PRO V2:
https://apps.apple.com/es/app/dsp-pro-v2/id1509287028?l=en
Operation Manual
Operation Manual can be downloaded from in website, from the following link:
https://www.tecnare.co/wp-content/uploads/2022/11/DMA-8x8_OM_V1.1_UK.pdf
Software User Guide
The software User Guide can be downloaded from in website, from the following link:
https://www.tecnare.co/wp-content/uploads/2022/12/DMA-
8x8_Software_UG_V1.0.pdf
DMA-8X8 DSP MATRIX | rev.:2.0
Keep these important operatin instructions. Check
www.tecnare.com for updates