hama 186075 Vendetta 300 Wireless Gamepad Instruction Manual

: June 13, 2024
: Hama

Table of Contents

186075 Vendetta 300 Wireless Gamepad
Explanation of warning symbols and notes
Package contents
Safety instructions
Start-up and operation
Turbo function
Auto function
Care and maintenance
Warranty disclaimer
Technical data
Declaration of Conformity
Documents / Resources

00
186075
Operating Instructions

186075 Vendetta 300 Wireless Gamepad

VENDETTA 300
WIRELESS GAMEPAD

| XInput
---|---
| DInput

DOWNLOADS
Further information are available on: download.urage.com/186075
IT’S ALL ABOUT U!
Whether it be sports simulations or beat-em-ups, experience your game even more intensively: with our Vendetta series, you really are in the centre of the action right from the get-go. Equipped with motors and vibration functions, they offer you situation-dependent reactions you can feel to your game play. Assign your additional keys as you wish with individual functions or entire combos. An ergonomic design and ideal grip make our products especially comfortable. They allow you to enjoy complete and precise control at any speed.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

Vendetta 300 game pad
USB-C charging cable
Nano USB dongle
These operating instructions

Safety instructions

The product is intended for private, non-commercial use only.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
As with all electrical products, this device should be kept out of the reach of children.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits specified in the technical data.
Do not use the product in areas in which electronic products are not permitted.
Be considerate. High volumes can disturb or interfere with your surroundings.
Do not open the device or continue to operate it if it becomes damaged.
The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Use the product for its intended purpose only.
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
Use the item only in moderate climatic conditions.
Do not operate the product outside the power limits given in the specifications.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not throw the battery or the product into fire.
Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Start-up and operation

Note – Pairing the controller

Note that the maximum range is 10 metres without obstacles such as walls, people, etc.

4.1 Connecting the controller

Connect the USB dongle of the controller to your PC and press the Home button on the controller.

4.2 Charging the battery
Warning – rechargeable battery

Only use suitable charging devices or USB connections for charging.
As a rule, do not charge devices or USB connections that are defective and do not try to repair them yourself.
Do not overcharge the product or allow the battery to completely discharge.
Avoid storing, charging or using the device in extreme temperatures and extremely low atmospheric pressure (for example, at high altitudes).
When stored over a long period of time, batteries should be charged regularly (at least every three months).
Fully charge the controller once before using it for the first time.
Connect the supplied USB-C charging cable to the USB-C port on the controller.
Connect the free plug on the USB-C charging cable to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.
During the charging procedure, the respective LEDs light up red.
If the controller is not connected to the PC, all 4 LEDs will flash.

Note – charging procedure

A complete charging cycle takes about 2.5 hours
The controller’s rechargeable battery can be charged both when it is connected and when on standby.
If the battery capacity is too low, the player LED will flash and the vibration function will start
Please use the enclosed USB-C cable only for charging the controller.
The actual battery life will vary depending on how you use the device, the settings and the environmental conditions (batteries have a limited life).4.3 Additional keys

4.3. Additional keys

The following action keys can be assigned to the additional keys: 1/2/3/4/L/R/L2/R2/L3/R3/ D-PAD
Individual functions or key combinations can be programmed.
Your settings remain active after an interruption to the connection.
Programming mode is aborted after 30 seconds.
Programming mode is ended after 25 keys.

4.4 Programming the additional keys

Press and hold the respective M button and Start briefly.
The four LEDs will now flash alternately.
Now enter the individual key or key combination.
To finish, press the relevant M key again.
To delete the M keys, hold “Start” and an M key pressed.
Now press the M key for which you wish to delete the setting.

Turbo function

The following action keys can be assigned a Turbo function: 1/2/3/4/L/R/L2/R2/L3/R3
To assign the relevant key, press and hold the action key and Turbo key at the same time.
To remove the Turbo function, repeat the procedure.
Your settings will be reset after an interruption to the connection.

Auto function

The following action keys can be assigned the Auto function: 1/2/3/4/L/R/L2/R2/L3/R3
To assign the relevant key, press and hold the action key and then press the Turbo key twice.
To remove the Auto function, repeat the procedure.
Your settings will be reset after an interruption to the connection.

Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical data

Batt. type	3.7 V Li-Po
Min. capacity	490 mAh / 1.81 Wh
Type capacity	500 mAh / 1.85 Wh
Charging time	Approx. 2.5 hours
Operating time	Approx. 15 hours

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00186075] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity can be found on the following website: download.urage.com 00186075 ****Downloads

Frequency band(s)	2400 – 2483 MHz
Maximum radio-frequency power transmitted	0 dBm

All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.

Service & Support
www.hama.com
+49 9091 502-0 hama 186075 Vendetta 300 Wireless Gamepad - Symbol
6 Hama GmbH & Co KG
86652 Monheim / Germany
00186075/03.23

Documents / Resources

| hama 186075 Vendetta 300 Wireless Gamepad [pdf] Instruction Manual
186075 Vendetta 300 Wireless Gamepad, 186075, Vendetta 300 Wireless Gamepad, 300 Wireless Gamepad, Wireless Gamepad, Gamepad
---|---