POWER PROBE PPBJP01GS Power Pack and Jump Starter Instruction Manual

: June 13, 2024
: POWER PROBE

Table of Contents

SAFETY AND GENERAL INFORMATION
PRODUCT DESCRIPTION – Intelligent Jumpstarter
STANDARD PACKAGE
OPERATIONAL GUIDANCE
OPERATIONAL GUIDANCE CONTINUED OUTPUT: USB DC5V/2A
SPECIFICATIONS
REPLACEMENT PARTS
ONE YEAR LIMITED WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

POWER PROBE PPBJP01GS Power Pack and Jump Starter Instruction Manual

This s the safety alert symbol. It is used to alert you to potential personal injury hazards. n Obey all safety messages that follow this symbol to avoid possible injury or death

Warring Icon WARNING

Read, understand and follow the instructions before using the product.
The operating manual and safety information should be communicated in the native language of the operator before use.
Failure to do so may cause personal injury and or property damage.

Read this manual and follow all the Safety Rules and Operating Instron s before using this product.
WARNING

SAFETY AND GENERAL INFORMATION

For your safety, read, understand, and follow the information provided with and on this Intelligent Jump starter. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and proper use of this product, remove from service immediately.

Inspect before each use. Do not use if there are broken, bent, cracked or damaged parts (including labels). Any intelligent jump starter that appears damaged in any way, or operates abnormally shall be removed from service immediately.

Lithium Polymer batteries are volatile. Failure to read and follow the use and operating instructions may result in fire, personal injury and damage to property if charged or used improperly. Li-Polymer battery may explode and cause fire if misused or defective
To maintain the internal battery of the equipment, charge the unit as soon as possible after using to start a vehicle or to charge batteries in other electrical equipment
When charging Intelligent Jumpstarted, place on a hard level surface and keep away from combustible materials. Don’t leave unattended while charging.
Always use Intelligent Jump starter in a well ventilated area and keep out of reach of children and away from combustible materials and all liquids.
The Intelligent Jumpstarter is designed to be used only on vehicles or boats with 12V electrical systems.
The unit is not designed to be used in place of a vehicle battery.
Do not insert foreign objects into any sockets, vents, or any opening in the unit.
Never disassemble or modify the unit. Only certified repair technician should repair this unit.Do Not store in any location where temperature may exceed 70°C, Charge only at ambient temperatures between 0°C – 60°C

If the product is not used for a long period of time, fully charge the unit then store. Charge once every 3 months.

PRODUCT DESCRIPTION – Intelligent Jumpstarter

The Power Probe Power Pack is a high performance electrical product with many innovative features and benefits. Increased Safety: Reverse polarity protection- output short circuit protection – excessive voltage protection – excessive current protection – no sparking to ensure safety and
inverse charge protection – based on an artificial intelligence (Al) platform providing user safety.
Low Power Starting: This product can successfully jump start vehicles even with only 3 power status lights showing. Low Voltage Detection: _Even with internal voltage _of the car battery as low as 0.06V an engine can be started using this unique product. Low Inner Resistance: The low inner resistance and small size of this unit is unique equipment, out performs other similar looking products and can jump start 12V vehicle with gasoline engines up to 5.0 L depending on mode.

STANDARD PACKAGE

Host unit 2. Smart Jump Start Cable
USB connection cable
USB Wall Adapter 5. User Manual
CHARGING THE UNIT * At Home
Insert the USB plug into a 5V/1A, 100-120V power charger with USB output port (not included) and plug the micro USB end into the input charge port of the unit.
The LED’s flash individually during charging. The unit cell is fully charged once all 4 power LED’s are on.
Charge time to full capacity is based on size, see Specifications table for details.
In A Vehicle
Ensure that the vehicle electrical system is 12V. Do Not attempt to charge the unit from a 24V vehicle system 2.
Insert the USB plug into an appropriate 12V charging socket with USB output (not included). Insert the micro USB plug into the unit charging port 3.
The LED’s flash individually during charging. The unit cell is fully charged once all 4 power LED’s are on.

* From A Desktop Computer or Laptop

Plug the USB plug of the cables into the USB port of the computer with the computer power supply switched on. Plug micro USB plug into the input charge port of the unit to charge

OPERATIONAL GUIDANCE

*Power Indicator

Press the power button to show power indicator light, see below.
Power Indicator| Lightless| LED Flash| 1LED| 2LED| 3LED| 3LED
---|---|---|---|---|---|---
Battery Capacity| 0%| 10%| 25%| 50%| 75%| 100%
To ensure optimum condition of unit battery, charge fully as soon as possible after use.
If the power indicator light remains off after switching to the “on” position, the unit cell is fully discharged. Please charge the unit as soon as possible to avoid damage.

Jump Start 12V for Gasoline Engines under 5 Liters (310 in’)

With a minimum of 3 power indicator LED alight, this unit can successfully jump start a 12V petrol vehicle with engines up to 5 L. Charge the unit immediately after use.
It is advisable to turn off all vehicle electrical appliances, such as Radio, Air Conditioning, inter- nal and external lights etc.
Insert the larger Jump Start cable block into the unit’s EC5 socket. Connect the red clamp of the Jump Start cable to the RED positive (+) battery connection on the vehicle, and the black
clamp to the BLACK negative (-) battery cable, then turn on the vehicle ignition and start the engine.
The green light on the unit cable top-box will light when the clamp is correctly fitted to the ve- hicle battery, and you can tur the vehicle ignition on and start the engine. The red light on the cable top-box willlight if the unit clamp is incorrectly fitted to the vehicle battery. Check and re-fit the clamps to the vehicle battery before attempting to start the engine

Reset
If the red and green lights on the black box of the Smart Jump Start cable are not working during Jjump starting the vehicle, please reset the jump starter as follows.

Remove the red clamp from the positive (+) terminal of the car battery.
Connect the red clamp back on the positive (+) terminal. Now the green light is on again and the product is ready for use.

Notes:

Before attempting to start the engine of a vehicle check that the blue cable plug is fully inserted into the unit EC5 socket. Failure to have this properly connected to the unit can cause a bad connection which may result in failure to start or damage to the unit/plug.
If the engine fails to the first time, check that the unit power LED has at least 3 bars on, of that the vehicle is i full working order.

OPERATIONAL GUIDANCE CONTINUED OUTPUT: USB DC5V/2A

Charge 5V mobile phones and other electronic devices from the USB 5V/2A output port of the unit.
- After connected 5V electronic device with provided USB cable assembly to the host MUST press switch once to start charging

LED TORCH
Switch button operating cycle is as follows:

Press twice – LED light will turn ON as torch mode.
Press once more – LED light will begin to strobe (quick flash)
Press again – LED light will tur off.

SPECIFICATIONS

Specification	PPBJP
Output	USB-DC5V/2A Jumpstart port (EC5) – DC 12V
Input	DC5V/1A

REPLACEMENT PARTS

Not all components of the product are replacement items. When ordering parts, give model number, part number and/or description.

Go to www.powerprobe.com for more information
Call or write for current pricing:
Power Probe, Inc. 760 Challenger Street Brea, CA 92821, US.A
Tel:(800) 655-3585 Fax:(714) 990-9478
E-Mail: sales@powerprobe.com
Website: http://www.powerprobe.com

ONE YEAR LIMITED WARRANTY

Power Probe products undergo a strict quality control inspection for workmanship, function, and safety before leaving the factory. From the date of purchase, Power Probe, Inc will warranty or repair it’s products for one (1) year against defects in parts and workmanship. We have a general warranty claim form along with potential request of proof of purchase.

In the unlikely event a problem is experienced with any of our products, a return merchandise authorization (RMA) number must be obtained either through our website at www.powerprobe. com, or by contacting us toll-free at 800-655-3585. Each product to be returned must have the item number, description of the problem and proof of purchase. Al returns must have a RMA number marked clearly on the outside of the shipping box, and printed RMA form enclosed inside the box. Only Power Probe can determine if product can be repaired or must be replaced.

Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE. (2) Power Probe, Inc. SHALL NOT BE LIABLE FORANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or xclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Power Probe Inc. 760 Challenger Street Brea, CA 92821 800-655-3585
sales@powerprobe.com