INVENTUM IOM6035RT Built In Multifunctional Oven User Manual

IOM6035RT Built In Multifunctional Oven
User Manual

IOM6035RT Built In Multifunctional Oven

|
---|---
|

Introduction

HOW TO USE THIS DOCUMENT

1. Read this document completely. Make sure that you know and understand all the instructions.
2. Obey the safety instructions to prevent injury and/or damage to the appliance and its surroundings.
3. Do the procedures completely and in the given sequence.
4. Keep this document in a safe area for future use. This document is a part of the appliance.

SYMBOLS USED IN THIS DOCUMENT

obey the instructions.
| Caution| “Caution” means that damage to the appliance is possible if you do not obey the instructions.
| Note| “Note” is used to give additional information.

Safety

SAFETY INSTRUCTIONS

• Read the instructions before operating the appliance and keep the instructions for future use.

• The appliance is only intended for domestic use within a home.
  Do not use corrosive chemicals or vapors in this appliance. This appliance is specifically designed to heat. It is not designed for industrial or laboratory use.

• Do not place any object between the door of the appliance. Do not allow soil or cleaner residue to accumulate on the sealing surfaces.

• If the door or the door seal is damaged, the appliance must not be operated until it has been repaired by a competent person.

• Do not heat liquids and other foods in sealed containers because the container can explode.

• Only a competent person is allowed to carry out any service or repairs that involve removing the cover.

• Keep the appliance out of reach of children. Children do not understand the danger of handling electrical appliances.

• This appliance cannot be used by children from 0 to 8 years.
  This appliance can be used by children aged from 8 years and above if they are continuously supervised. The appliance can also be used by people with reduced physical, sensory or mental capabilities or lack of experience or knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  Keep the appliance and its cord out of reach of children aged less than 8 years.

• Cleaning and maintenance cannot be done by children.

• Children must not play with the appliance.

• Only use materials that are suitable for use in ovens.

• The appliance must be cleaned regularly and any food deposits must be removed.

• When you see smoke, switch off and unplug the appliance.
  Keep the door closed in order to stifle any flames.

• Do not place items on the door of the appliance.

• Install the appliance only in accordance with the installation instructions.

• Always carry out regular checks of the appliance and the main cable to make sure that no damage is evident. Should there be any signs that the appliance or the mains cable is damaged in the slightest degree, the entire appliance should be returned to the Customer Service Department. For your own safety, only use the accessories and spare parts from the manufacturer which are suitable for the appliance.

• Only use and store the appliance indoors.

• Do not use the appliance near water, in a wet basement/garage, or near a swimming pool.

• Avoid touching hot surfaces, especially the inside of the appliance.

• Do not cover any vents of the appliance.

• Do not bend the main cable and keep it away from the heated surface.

• Failure to keep the appliance clean could lead to deterioration of the surface which could adversely affect the life of the appliance and possibly result in a hazardous situation.

• The appliance is not intended to be operated by means of an external timer or a separate remote-control system.

• The appliance can only be used when it is built-in kitchen furniture.

• Never leave the appliance unattended when in use.

• For your own safety, only use the accessories and spare parts from the manufacturer that are suitable for the appliance.

• Never unplug the appliance from the mains socket by pulling the mains cable.

• Always make sure that your hands are dry before handling the mains cable, mains plug, or switch.

• Should you decide not to use the appliance anymore, make it inoperative by cutting the mains cable after removing the mains plug from the mains socket. Make all potentially dangerous parts of the appliance harmless, particularly for children who might be tempted to play with it.

• Never immerse any part of the main body, lid, mains cable, and mains plug in water or any other liquid to protect against electrical hazards.

• If the appliance is used for other purposes than intended, or if it is not handled in accordance with the instruction manual, the full responsibility for any consequences will rest with the user. Any damages to the appliance or other things are not covered by the warranty.

• Never use a pressure cleaner or steam cleaner to clean the appliance.

• Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with the symbol indicating a separate collection of such equipment must be returned to a municipal waste collection point.

• Do not cover the bottom of the appliance with aluminum foil.
  The aluminum foil stops the heat and causes poor results and damage to the enamel.

• The appliance has a fan that continues after the operation.

• Only a qualified installer is allowed to install the appliance.

• In case of incorrect installation or connection, the warranty becomes invalid.

• If the mains cable is damaged, it may only be replaced by the manufacturer, its service organization or similarly qualified persons, in order to prevent hazardous situations.

• The electrical connection must meet national and local regulations.

• The main socket and main plug must always be within reach.

• The appliance may not be connected to the main supply via a power strip or extension cable. If this is not observed, the safety of the appliance cannot be guaranteed.

• The appliance must be earthed.

• Only connect the appliance to alternate current, to an earthed mains socket. Make sure that the voltage in your home corresponds with the voltage printed on the type plate of the appliance.

• Make sure that the appliance is switched off before you replace a lamp.

Description

INTENDED USE
The appliance is intended to be used for preparing food.
Do not use the appliance for any other purpose than described in this document.

BUILT-IN OVEN
(Figure 1)

Use the baking tray for cake rolls and roasting.
Note:
The appliance is supplied with two baking trays with different depths.
Grill rack| To cook food.
Use the grill rack for grilling meat and for toasting bread.
Temperature sensor| To measure the core temperature of a dish during cooking.

CONTROL PANEL
(Figure 2)

defrost, temperature sensor, delayed start, dough proving, light).
Oven indicator| To show the available and selected oven functions. Refer to section ‘Oven modes:
Clock| •To show the remaining time during operation.
•To show the current time when the appliance is off.
Temperature indicator| To show the selected temperature.
Start/pause button| To start or pause the appliance.
Lamp button| To activate/deactivate the lamp inside the appliance.
Temperature button| To select the temperature.
Clock button| To set the clock.
Up button| Adjust the settings.
Slider| Adjust the settings.
Touch and hold the slider to the left to decrease the setting.
Touch and hold the slider to the right to increase the setting.
Down button| Adjust the settings.
Function button| Select a function.
Quick-preheat button| Select the quick-preheat function.
Delayed-start button| Select the delayed-start function.
Timer/child-lock button| To use the timer or to activate/deactivate the child lock.
Cancel button| To cancel a function or program.

Note:
You can use both the up/down button or the slider to adjust the settings of the appliance. All three buttons have the same function.

Installation

SAFETY INSTRUCTIONS FOR INSTALLATION

• Safety during use can only be guaranteed if the installation was done correctly and according to the instructions. The installer is liable for damage caused by incorrect installation.
• The electrical installation must be carried out by a qualified electrician. The electrician must comply with national and local regulations.
• The appliance has protection class I and may only be used in combination with an earthed connection.
• The appliance must be connected to a permanent installation in which provisions for switching off are integrated, in accordance with the installation instructions.
• Make sure that the mains cable does not get jammed during installation or is running along sharp edges. The mains cable must be placed in such a way that no contact is made with hot parts of the appliance.
• The connection point, mains socket, and/or mains plug must always be accessible.
• The kitchen furniture in which the appliance is installed must be heat resistant to at least 90°C. This also applies to the doors or front of the furniture.
• Make sure that the kitchen furniture in which the appliance is installed is firmly attached, for example by fastening the furniture to adjacent elements.
• In case of incorrect installation or connection, the warranty becomes invalid.
• Changes to the appliance, including replacing the mains cable, must be carried out by a certified installer.
• Make sure that there is sufficient ventilation and fresh air around the appliance.

UNPACKING

1. Remove the packaging.
   Caution:
   Make sure that you remove the sticker from the door.

2. Examine the appliance for damage.

3. Make sure that the voltage is the same as on the type plate.

PREPARING FOR INSTALLATION
(Figure 3)
(*) The minimum dimension for B1 is 585 mm and the maximum dimension is 595 mm.

Note:
Make sure that the kitchen furniture is prepared according to the dimensions of the appliance.

INSTALLING THE APPLIANCE
Preliminary requirements

| 1. Make sure that the kitchen furniture is prepared according to the correct dimensions.
---|---

Warning:
Two persons are required to install the appliance.
Caution:
Make sure that the mains cable does not get jammed during installation or is placed on top of the appliance.
Caution:
Do not cover the opening between the kitchen furniture and the top of the appliance. The opening is required for ventilation.
Note:
It is possible to connect the appliance to the main supply before positioning the appliance.

Procedure

1. Put appliance (A) in the center of the kitchen furniture.
   (Figure 4)
   Caution:
   Make sure that there is a minimum space of 2 mm between the appliance and the walls of the kitchen furniture.

2. Open the door (E) of the appliance.

3. Place the appliance in the kitchen furniture.

4. Install the plugs (B).

5. Fasten the appliance to the kitchen furniture. Use the screws (D).

6. Install the covers (C).

7. Close the door.

8. Connect the appliance. Refer to the section ‘Connecting the appliance’.

CONNECTING THE APPLIANCE

1. Make sure that the voltage in your home corresponds with the voltage of the appliance.
2. Make sure that the electrical system in your home is supplied with a 16 Amp fuse.
3. Use the supplied mains cable to connect the appliance to the mains socket.
   After connecting, the clock shows ’00:00′ and you will hear a sound signal.

REPLACING THE MAINS CABLE

If necessary, you can replace the supplied mains cable with a longer or different mains cable.

Warning:
Replacing the mains cable must be carried out by a qualified person.

Note:
Make sure that the new mains cable has a minimum core cross-section of 1.5 mm2 and a length of 1 m.
If you use a mains cable that is too short, you cannot connect the appliance and position it in the kitchen furniture before connecting the appliance to the mains socket.

PREPARING FOR OPERATION

1. Remove the accessories from the appliance.

2. Clean the appliance and the accessories. Use warm water and a mild cleaning agent.

3. Rinse the appliance and the accessories thoroughly with water.

4. Dry the appliance and the accessories.

5. Use the oven for 60 minutes at a temperature of 250°C to remove any production residues, such as oil and to prevent bad smells. Refer to section ‘Using the oven function’.
   Warning:
   Make sure that the room is properly ventilated.

6. Let the appliance cool down.

7. Clean the appliance again. Use warm water and a mild cleaning agent.

8. Rinse the appliance thoroughly with water.

9. Dry the appliance.

10. Install the guide racks. Refer to section ‘Installing the guide racks’.

INSTALLING THE GUIDE RACKS

1. Identify the guide racks for the left side (A) and the right side (B).
2. Push the guide rack (C) in the opening at the rear of the appliance.
3. Push the guide rack in the opening at the front of the appliance.

SETTING THE CLOCK

1. Touch the clock button. The clock display shows ‘00:00’ and the value for hours flashes.

2. Touch the up/down button or the slider to adjust the hours.
   Note:
   The value must be between 0 and 23.

3. Touch the clock button again. The value for minutes on the clock display flashes.

4. Touch the up/down button or the slider to adjust the minutes.
   Note:
   The value must be between 0 and 59.

5. Touch the clock button to save the settings. The ‘:’ in the clock display flashes.

6. Repeat the procedure to adjust the time.

SETTING THE KITCHEN TIMER
The kitchen timer can be used independently from the cooking timer.

1. Touch the timer/child-lock button. ‘00:00’ flashes on the clock display.

2. Touch the up/down button or the slider to adjust the hours.
   Note:
   The value must be between 0 and 23.

3. Touch the timer/child-lock button again. The value for minutes on the clock display flashes.

4. Touch the up/down button or the slider to adjust the minutes.
   Note:
   The value must be between 0 and 59.

5. Touch the timer/child-lock button to save the settings. The ‘:’ in the clock display flashes and the timer counts down.
   When the kitchen timer finishes, you will hear a sound signal 10 times and the clock display shows the current time. The appliance does not automatically switch off and the program or function continues.

SETTING THE COOKING TIME

1. Touch the clock button. ‘00:00’ flashes on the clock display.
2. Touch the up/down button or the slider to set the cooking time.
   When the cooking time finishes, you will hear a sound signal 5 times and the display shows ‘End’.

USING THE DELAYED-START FUNCTION
You can use the delayed-start function to make sure that your dish is ready at a preset time. The appliance will automatically start.
Note:
Make sure that the clock is set before you use the delayed-start function. Refer to the section ‘Setting the clock.
Note:
You cannot use the kitchen timer when the delayed-start function is active.

1. Touch the delayed-start button. The indicator for the delayed-start function on the display is on and the value for hours flashes.

2. Touch the up/down button or the slider to adjust the hours.
   Note:
   The value must be between 0 and 23.

3. Touch the delayed-start button again. The values for minutes on the display flash.

4. Touch the up/down button or the slider to adjust the minutes.
   Note:
   The value must be between 0 and 59.

5. Touch the delayed-start button to save the settings.

6. Touch the function button to select the desired function.

7. Touch the up/down button or the slider to select the temperature.

8. Touch the clock button and then touch the up/down button or the slider to set the time.

9. Touch the start/pause button to finish. The indicator for the delayed-start function on the display flashes.
   When the delayed-start time finishes, you will hear a sound signal, and the appliance starts.

USING THE INSERT LEVELS
The appliance has 5 insert levels to ensure that you can partly remove the grill rack or baking tray without tilting. As a result, you can safely remove the dish from the appliance and the grill rack or baking tray will not accidentally fall from the appliance.

Caution:
For safety reasons, the baking tray should be placed in one of the insert levels. Do not place the baking tray on the bottom of the appliance.

1. Use the guide racks to correctly place the grill rack (A) or baking tray (B) in the appliance.
2. Make sure that the accessories are fully placed in the appliance and that they do not make contact with the door. (Figure 8)

USING THE OVEN FUNCTION
For an overview of the available oven modes, refer to the section ‘Oven modes’.

1. Touch the function button. The oven indicator shows the conventional mode.
2. Touch the function button again to select the desired oven mode. The oven indicator shows the selected mode.
3. Touch the up/down button or the slider to select the temperature.
4. Set the cooking time. Refer to section ‘Setting the cooking time.
5. Touch the start/pause button to start the appliance.
   Note:
   If you open the door of the appliance during cooking, you must touch the start/pause button to continue the cooking.

USING THE QUICK-PREHEAT FUNCTION
You can use the quick-preheat function to quickly preheat the appliance to a set temperature.

Note:
The quick-preheat function cannot be used for dough proving (oven mode).

1. Touch the function button to select the desired oven mode.
   Note:
   If the mode does not support the quick-preheat function you will hear a sound signal.

2. Touch the quick-preheat button. The indicator for the quick-preheat function on the display is on.
   When the appliance is preheated, a sound signal sounds and the indicator for the quick-preheat function goes off.
   You can now place your dish in the appliance.

USING THE TEMPERATURE SENSOR
When using the temperature sensor, you can measure the core temperature of a meat or fish dish.
Note:
For an overview of the core temperature for a number of dishes, refer to the section ‘Core temperatures’.

1. Remove the cap (A).

2. Connect the temperature sensor (B) to the appliance.
   (Figure 9)
   The display shows the indicator for the temperature sensor function and the clock shows the temperature setting of the sensor.

3. Place the temperature sensor into the dish.
   Note:
   Do not place the temperature sensor near a bone or a hole in the dish.

4. Touch the up/down button or the slider to select the desired core temperature of the dish.

5. Touch the function button to select the desired oven mode.

6. Touch the up/down button or the slider to adjust the temperature of the oven.

7. Touch the start/pause button to start the appliance.
   When the dish reaches the core temperature, you will hear a sound signal 5 times and the program finishes.
   Note:
   During cooking, you can touch the temperature button to change the temperature of the sensor or the core temperature of the dish.

CHANGING THE TEMPERATURE DURING COOKING
You can change the temperature at any time.

1. Touch the temperature button.
2. Touch the up/down button or the slider to adjust the temperature. The temperature indicator shows the selected temperature.

CHANGING THE COOKING TIME DURING COOKING
You can change the cooking time at any time.

1. Touch the clock button.
2. Touch the up/down button or the slider to adjust the time.

PAUSING THE APPLIANCE

1. Push the start/pause button to pause the appliance.
2. Push the start/pause button again to start the appliance again.

ACTIVATING AND DEACTIVATING THE CHILD LOCK
When the child lock is activated, you cannot operate the touch buttons.
Activating the child lock

1. Touch and hold the timer/child-lock button for 3 seconds to activate the child lock. You will hear a long sound signal and the clock display shows a lock.

Deactivating the child lock

1. Touch and hold the timer/child-lock button for 3 seconds to deactivate the child lock. You will hear a long sound signal and the clock display no longer shows a lock.

STOPPING THE APPLIANCE

1. Touch the start/pause button to stop the appliance.
   Note:
   When you are choosing a cooking function, the cancel button can also be used to cancel the function at any time.

Cleaning and maintenance

CLEANING THE APPLIANCE
Warning:
Make sure that the appliance is switched off and cooled down before cleaning.
Caution:
Do not use a pressure cleaner or steam cleaner to clean the appliance.
Caution:
Do not use abrasive cleaning agents or sharp scrapers.
Note:
You can remove the guide racks and the door to easily clean the appliance. Refer to sections ‘Removing the guide racks’ and ‘Removing the door’.

1. Clean the inside of the appliance after every use. Use a damp cloth.

2. In case of heavy dirt, clean the inside of the appliance with warm water and a mild cleaning agent. Thoroughly rinse and dry the inside after cleaning.
   Note:
   Leave the door open slightly to make sure that the appliance dries completely.

3. Clean the accessories. Use warm water and a mild cleaning agent. Dry the accessories after cleaning.

4. Clean the outside of the appliance. Use a damp cloth or sponge.

5. In case of heavy dirt, clean the outside of the appliance with a mild detergent.
   Note:
   The cover of the door can become discolored or the glass inside the door can be dirty. You can remove the cover for thorough cleaning. Refer to section ‘Removing the cover of the door’.

6. If necessary, clean the cover of the door and the glass inside the door. Use warm water and a mild cleaning agent. Dry the cover after cleaning.

REMOVING THE GUIDE RACKS

1. Pull the guide rack (A) from the opening at the front of the appliance.
2. Pull the guide rack from the opening at the rear of the appliance.
3. Remove the guide racks.
4. After cleaning, install the guide racks again. Refer to section ‘Installing the guide racks’.

REMOVING THE DOOR
Warning:
Risk of injury. Keep your hands away from the hinges.

1. Open the door (A) of the appliance.
   Caution:
   Do not use a sharp object to open the levers. This can cause damage to the appliance. (Figure 11)

2. Open the levers (B) on each side of the door.

3. Close the door halfway.

4. Remove the door. Use both hands.

5. After cleaning, install the door again. Refer to section ‘Installing the door’.

INSTALLING THE DOOR
Warning:
Risk of injury. Keep your hands away from the hinges.

1. Carefully place the door (A) in the appliance.
   Caution:
   Make sure that the hinges are placed correctly. If the hinges are placed incorrectly, you cannot open the door. (Figure 12)

2. Open the door.

3. Close the levers (B) on each side of the door.

4. Close the door of the appliance.

REMOVING THE COVER OF THE DOOR

1. Push the pins (A) on each side of the door.

2. Remove the cover (B).
   Note:
   When the cover is removed, the glass panels inside the door are also accessible.

3. After cleaning, install the cover again. Refer to section ‘Installing the cover of the door’.

INSTALLING THE COVER OF THE DOOR
Caution:
Make sure that the glass panels are installed correctly.

1. Carefully push the cover (A) in the door until you hear a click.

REPLACING THE LAMP
Warning:
Make sure that the appliance is cooled down.

| 1. The appliance is switched off.
2. The appliance is disconnected from
the mains supply.| | • Halogen lamp (25W, 230V, T300°C)
---|---|---|---

Procedure

1. Turn the glass cover (A) counter-clockwise to remove it.
2. Carefully pull the lamp (B) to remove it.
3. Replace the lamp.
4. Install the glass cover.

Closing requirements

1. Connect the appliance.

REPLACING THE SIDE LAMP
Warning:
Make sure that the appliance is cooled down.

Preliminary requirements

| 1. The appliance is switched off.
2. The appliance is disconnected from the main supply.| | • Halogen lamp (25W, 230V, T300°C)
---|---|---|---

Extra information

OVEN MODES

cookies. The heat comes from the heating elements at the rear of the appliance.| 50-250°C
| Hot air, eco| Used for baking at several levels while saving energy. The heat comes from the heating elements at the rear of the appliance.| 140-240°C
| Conventional + fan| Used for baking at several levels, for example, baking trays with cookies. The fan distributes the heat from the heating elements evenly throughout the appliance.| 50-250°C
| Single grill| Used for grilling small portions and for browning food. Place the dish in the middle of the appliance.| 150-250°C
| Double grill + fan| Used for grilling a layer of food or to gratin dishes.| 50-250°C
| Double grill| Used for grilling large portions of meat.| 150-250°C
| Pizza| Used for pizzas and dishes that require heat from below. The heat comes from lower and rear heating elements.| 50-250°C
| Heat from below| Used for extra browning of pizza bottoms, quiches, and pies. The heat comes from the lower heating element.| 30-220°C
| Defrost| Used for slowly defrosting food.| –
| Dough proving| Used for proving yeast dough and sourdough.| 30-45°C
| Temperature sensor| Used for baking meat. The temperature sensor measures the core temperature of the dish.| 40-99°C
Dish| Core temperature (°C) – rare| Core temperature (°C) – medium| Core temperature (°C) – well done
---|---|---|---
Beef| Steak| 50| 55| 65
Tenderloin| 48| 52| 56
Pork| Roulade| –| 63| 70
Veal| Roast| 75| 80| 85
Veal shin| 85| 88| 90
Poultry| Chicken| 80| 83| 86
Duck filet| 60| 65| 70
Lamb| Leg of lamb, roast| 65| 70| 75
Game| Saddle of hare/venison| 50| 55| 65
Leg of hare/hare| 70| 75| 80
Fish| Salmon| 50| 55| 65
Trout| 50| 55| 65
Tuna| 45| 50| 55

Troubleshooting

GENERAL TROUBLESHOOTING PROCEDURE

1. Try to find a solution for the problem with the help of the troubleshooting table.
2. If you cannot find a solution to the problem, contact the Inventum-servicedienst

TROUBLESHOOTING TABLE

fuse, if necessary replace the fuse.
The mains cable is not connected.| Make sure that the mains cable is correctly connected to the mains socket.
The power is interrupted.| Do a check if the power in the kitchen is working.
The appliance does not start and the clock display shows a lock.| The child lock is activated.| Deactivate the child lock. Refer to the section ‘Activating and deactivating the child lock!
The display shows ’00:00′.| The power was interrupted.| Set the clock. Refer to section ‘Setting the clock:
A function or setting cannot be selected.| The temperature or the setting is not available for the selected function.| Make sure that you select a setting that is available for the selected function.
The lamp or side the side lamp does not work.| The lamp is broken.| Replace the lamp. Refer to section ‘Replacing the lamp or ‘Replacing the side lamp

Product fiche

TECHNICAL SPECIFICATIONS

General terms and conditions of service and warranty

We do not need to remind you of the importance of service. After all, we develop our products to a standard so that you can enjoy them for many years, without any concerns.  If, nevertheless, there is a problem, we believe you are entitled to a solution straight away. Hence our products come with an exchange service, on top of the rights and claims  you are entitled to by law. By exchanging a product or part, we save you time, effort and costs.
2-year full manufacturer’s warranty

1. Customers enjoy a 2-year full manufacturer’s warranty on all Inventum products. Within this period, a faulty product or part will always be exchanged for a new model, free  of charge. In order to claim under the 2-year full manufacturer’s warranty, you can either return the product to the shop you bought it from or contact the Inventum costumer service department via the form at ‘https://www.inventum.eu/service-aanvraag‘.
2. The 2-year warranty period starts from the date the product is bought.
3. In order to claim under the warranty, you must produce a copy of the original receipt.
4. The warranty applies only to normal domestic use of Inventum products within the Netherlands.

5-year Inventum warranty

1. Inventum offers a 5-year warranty on most large domestic appliances and a selection of small domestic appliances. This 5-year Inventum warranty consists of a 2-year full manufacturer’s warranty, extended by a further 3-year warranty. The only thing you need to do to qualify for the 3-year extended warranty is to register the product within  45 days of purchase. You can read more about registering the product in the following paragraph.
2. In accordance with the 5-year Inventum warranty provisions, a faulty product or part will always be exchanged for a new model during the first 2 years under the warranty.  During the 3rd to 5th year under the warranty, you will only pay the costs of exchange. The current costs of exchange are listed at ‘https://www.inventum.eu/ omruilkosten’.
3. In order to claim under the 5-year Inventum warranty, you can either return the product to the shop you bought it from or contact the Inventum customer service department via the form at ‘https://www.inventum.eu/service-aanvraag‘.
4. The 5-year warranty period starts from the date the product is bought.
5. In order to claim under the warranty, you must produce a copy of the original receipt.
6. The warranty applies only to normal domestic use of Inventum products within the Netherlands.

Product Registration

1. The 3-year extended warranty is easy to obtain, free of charge, by registering the product within 45 days of purchase, via the website ‘https://www.inventum.eu/garantie-registratie‘. If you did not register the product within 45 days of purchase, you can still do so up to 2 years after the purchase date. However, there will be a charge.
   The one-off registration charge is € 89 for each separate product. Registration is possible only for products that are subject to the 5-year Inventum warranty. Whether the product qualifies for the 5-year Inventum warranty is stated in the product user manual and in the product information sheet, on Inventum’s website.

2. The warranty period always starts from the date the product is bought. If the product is registered for the extended warranty at a later date, the warranty period still starts from the original date of purchase.

3. The 3-year extended warranty can only be applied for if you are in the possession of a copy of the original receipt and the Inventum 5-year warranty certificate.

Large domestic appliances

1. Breakdowns or faults in large domestic appliances (separate and built-in white goods) can be registered via the form at ‘https://www.inventum.eu/service-aanvraag‘, by calling the Inventum customer service department or in the store where you bought the device. The telephone number of the customer service department can be found at  ‘https://www.inventum.eu‘.
2. In the event of breakdowns or faults in large domestic appliances, Inventum will have the option to have a service engineer inspect the faulty device onsite at the customer in the Netherlands and to carry out repairs, there and then. The Inventum customer service department can also decide to have the device exchanged.
3. If you suffer a breakdown or fault in a large domestic appliance during the first 2 years from the date of purchase, Inventum will not charge any costs for the exchange, call- out or parts and labor.
4. If you registered the product as described before at ‘https://www.inventum.eu/garantie-registratie‘ and you subsequently report a breakdown of a large domestic appliance in the 3rd to 5th year of the date of purchase, the 5-year Inventum warranty applies and the device will be repaired or exchanged, free of charge. In the event of a repair or exchange of the device, you only pay the costs of the exchange. The current costs of exchange are listed at ‘https://www.inventum.eu/omruilkosten‘. If you did not register the product, the 3-year extended warranty does not apply.
5. When reporting a breakdown or fault, a service engineer will contact the customer within 1 working day in order to make an appointment. When the report is made in a  weekend or during a public holiday, this will be the next working day.
6. If you report a breakdown or fault via the form at ‘https://www.inventum.eu/service-aanvraag‘, you will be kept informed of the progress via mobile messages and e-mail.
7. The warranty period starts from the date the product is bought.
8. In order to claim under the warranty, you must produce a copy of the original receipt and the Inventum 5-year warranty certificate.
9. The warranty applies only to normal domestic use of Inventum products within the Netherlands.

Breakdowns or faults outside the warranty period

1. Breakdowns or faults in small or large domestic appliances outside the warranty period can be reported to the customer services department via the form at  ‘https://www.inventum.eu/service-aanvraag‘ or by calling the customer services department.
2. The customer services department may ask you to send the product for inspection or repair. The costs of dispatch will be at your expense.
3. The inspection to establish whether the repair is possible involves a charge. You need to grant your permission for this, in advance.
4. In the event of a large domestic appliance, Inventum, at your request, can send out a service engineer. In that case, you will be charged the call-out costs, as well as parts and labor.
5. In the event of an instruction to repair, the repair costs must be paid in advance. In the event of a repair by a service engineer, the costs of the repair must be settled with the engineer onsite, preferably by means of PIN payment.

Warranty exclusions

1. The following is excluded from the aforesaid warranties:
   • normal wear and tear;
   • improper use or misuse;
   • insufficient maintenance;
   • failure to comply with the operating and maintenance instructions;
   • unprofessional installation or repairs by third parties or the customer himself;
   • non-original parts used by the customer;
   • use for commercial or business purposes;
   • removal of the serial number and/or rating label.

2. In addition, the warranty does not apply to normal consumer goods, such as:
   • dough hooks, baking tins, (carbon) filters, etc.;
   • batteries, bulbs, carbon filters, fat filters, etc.;
   • external connection cables;
   • glass accessories and glass parts such as oven doors;
   • and similar items.

3. Transport damage not caused by Inventum is also excluded. Therefore, inspect your new device before starting to use it. If you detect any damage, you must report this to  the store where you purchased the product within 5 working days, or to the Inventum customer service department via the form at ‘ https://www.inventum.eu/service-aanvraag‘. If transport damage is not reported within this period, Inventum does not accept any liability in this respect.

4. The following are excluded from warranty and/or replacement: faults, loss of, and damage to the device as a result of an event that is normally insured under the home contents insurance.

Important to know

1. The replacement or repair of a faulty product, or a part thereof, does not lead to an extension of the original warranty period.
2. Parts that have been replaced, packaging material, and exchanged devices are taken back by the service engineer and become the property of Inventum.
3. If a complaint is unfounded, all costs arising from it will be at the customer’s expense.
4. Following the expiry of the warranty period, all costs of repair or replacement, including administration costs, dispatch, and call-out charges, will be charged to the customer.
5. Inventum cannot be held liable for damage as a result of devices built in incorrectly.
6. Inventum cannot be held liable for damage caused by external events unless this liability arises from mandatory statutory provisions.
7. These warranty and service provisions are governed by Dutch law. Disputes will be settled exclusively by the competent Dutch court.

Inventum huishoudelijke Apparaten B.V.
Postbus 5023
6802 EA Arnhem
www.inventum.eu
facebook.com/inventum1908
youtube.com/inventum1908

IOM6035RT/01.0920
Modifications and printing errors reserved

References

• Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
• Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
• Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>