IKEA UTNAEMND Induction Cooker/Hob Instruction Manual

UTNAEMND Induction Cooker/Hob
Instruction Manual

Product description

1. Single cooking area (210 x 190 mm) 2100W, with Booster 3000W.
2. Single cooking area (210 x 190 mm) 2100W, with Booster 3000W.
3. Single cooking area (200 mm) 2300W, with Booster 3000W.
4. Single cooking area (160 mm) 1400W, with Booster 2100W.
5. Control panel

1+2 Bridge cooking area (210 x 380 mm) 3000W, with Booster 3700W.

Pot detection
Each of the cooking areas is equipped with a system to detect the presence of a pan.
The pan presence detection system recognizes pans with a magnetizable base suitable for use with induction hobs.
If the pan is removed during the operation, or if an unsuitable pan is used, the display shows the symbol .
Residual heat indicator
The residual heat indicator is a safety feature, indicating that the surface of the cooking area is still at a temperature of 50° C or above, which may cause burns if touched by a naked hand. The digit for the corresponding cooking area is displayed .

Control panel

Functions

Boost
Each cooking area can be set to an extra power level for 5 minutes at most.
To activate: select one of the 4 cooking areas and select the value “Boost” on the scroll keypad. The corresponding digit displays .
To deactivate select one of the other possible values on the scroll keypad.
Child lock
This function prevents an accidental operation of the appliance.
To activate: simultaneously press and , release and the press again. All the digits display . The operations described must be completed within 10 seconds.
To deactivate: simultaneously press and , release and the press again. All the digits displayed go out. The operations described must be completed within 10 seconds.
Lock
It is possible to lock the hob functions during use to avoid accidental modifications, for example in order to clean the hob.

To activate press .
To deactivate press .

Cooking areas Timer
Timer with alarm for cooking times.
To activate: turn the hob on and select one of the 4 cooking areas, press “+” and “-” to set the Timer. The symbol for the cooking area lights up.
Press individually on “+” and “-” to set the countdown. The Time increase and decrease during set-up vary according to the time to be set. The Displays in the Timer management commands area show the countdown.
Do not touch anything for 5 seconds to confirm the time.
To disable: wait until the end of the countdown or set the Timer values to zero (press “+” and “-” and set zero with “-”.
Timer (generic)
Timer with alarm for generic use.
To activate: turn the hob on, press “+” and “-” to set the Timer. Press individually on “+” and “-” to set the countdown. The Time increase and decrease during set-up vary according to the time to be set.
The Displays in the Timer management commands area show the countdown.
Do not touch anything for 5 seconds to confirm the time.
To disable: wait until the end of the countdown or set the Timer values to zero (press “+” and “-” and set zero with “-”.

Automatic Function (hobs)
Select one of the 4 cooking areas and press and hold for 3 seconds on the selected value (from 1 to 8) on the scroll keypad. The Hob will have a peak of up to maximum power for a time that varies according to the previously set cooking power and then remains to the value set at the beginning(from 1 to 8).

Pause Function
This function freezes all the hob settings if the person using the hob needs to go away for a time.
During the pause, all digits display to indicate that:

• No energy is being produced in any of the cooking areas.
• All functions and timers are disabled

To activate: with the hob working, press and hold for at least 1 second.
To deactivate: Press and hold for at least 1 second and slide your finger from minimum to maximum along the scroll keypad that shows an animation.

Recall Function
This function is used to recall all the hob function settings in the event of involuntary shut-down using .
With the hob turned off, to recover the previous settings press within 6 seconds, and press within 6 seconds. A beep sounds to confirm the operation.
With the hob turned off, if it is not turned on again within 6 seconds the previous function settings will be lost.
Melting function
To activate select one of the 4 cooking areas and press .
The digit for the selected area will show
To deactivate press or press .

Bridge Function
This function allows 2 cooking areas to be connected so that they can be controlled as a single, large cooking area. This means it is possible to use larger pans.
This function can only be used in the left-hand cooking areas.
To activate: simultaneously press both left scroll keypads until a digit displays and the symbol will light up.
To set the power of the bridge zone use the furthest left scroll keypad.
In both the cooking areas, the symbol will light up.
To deactivate: simultaneously press the buttons that have been used to activate the bridge, until the symbols and disappear.
Important! The hob automatically recognizes a larger pan occupying two cooking areas, but it will treat the areas independently unless the bridge function is activated.

Hob technical data

| Unit| Value
---|---|---
Type of product| | Built-in Hob
Dimensions| Width| mm| 780
Depth| mm| 520
Min./max height| mm| 54
Total power| W| 7400
Parameter| Value
---|---
Power supply voltage/frequency| 220-240 V, 50 Hz;
60 Hzw
220 V, 2N- 380-415 V. 50 Hz;
2N- 380 V, 60 Hz;
Weight of the appliance| 10,4 Kg

The energy efficiency of hob

Left rear 210 x 190 mm
Right rear 0 200 mm
Right front 0 160 mm
Energy consumption per Bridge cooking area| 192 Wh/kg
Energy consumption per cooking area| Right rear 185 Wh/kg
Right front 187 Wh/kg
Energy consumption of the hob (electric cooking)| 188 Wh/kg

To download the full version visit www.ikea.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>