di-soric LI 40-10-390-450 I Light Curtains Grids Owner’s Manual
- June 13, 2024
- di-soric
Table of Contents
di-soric LI 40-10-390-450 I Light Curtains Grids
Product Information
The 207192 LI 40-10-390-450 I Light grids are a type of light grid system with
evaluation electronics. They are designed for measuring and switching
purposes. The system consists of a
transmitter, receiver, monitoring height, profile length, evaluation
electronics, and profile cross section. The light grids have a compact design
with an aluminum housing, making them easy to install. The light grids are
available with different evaluation electronics options, including LVE, LVX,
and LVB. They offer beam evaluation in horizontal or diagonal directions. The
housing material is made of aluminum, and the protection class ensures
durability and reliability.
Technical Data
- Service voltage: (typ.)
- Assembly: Profile cross section
- Dimension: Profile length
- Housing material: Aluminum
- Protection class: (not specified)
- Evaluation: Evaluation electronics
- Output function: Switching output
- Light source: (not specified)
- Color: (not specified)
- Wavelength: (not specified)
- Beam evaluation: Horizontal or diagonal
- Beam separation: (not specified)
- Number of beams: (not specified)
- Monitoring height: (not specified)
- Range: (not specified)
- Measuring range: (not specified)
- Ambient temperature during operation: (not specified)
- Protection type: (not specified)
- Connection: (not specified)
Product Usage Instructions
-
Unpack the light grid system and ensure all components are included (transmitter, receiver, monitoring height, profile length, evaluation electronics, and profile cross section).
-
Identify the required evaluation electronics option (LVE, LVX, or LVB) based on your application needs.
-
Choose the desired beam evaluation direction (horizontal or diagonal) for your specific application.
-
Install the light grids by following the provided installation instructions. Ensure proper alignment and positioning between the transmitter and receiver.
-
Connect the evaluation electronics to the light grids according to the specified connection instructions.
-
Check the service voltage requirements and provide the necessary power supply.
-
Configure the output function of the light grids based on your application requirements (switching output).
-
If applicable, adjust the monitoring height and range settings according to your specific needs.
-
Ensure that the ambient temperature during operation is within the specified range for optimal performance.
-
Follow the recommended protection type guidelines to protect the light grids from external factors.
-
If additional information or accessories are needed, refer to the provided link: https://www.di-soric.com/207192
- With evaluation electronics LVE … / LVX … measuring and switching
- With evaluation electronics LVB … switching
- Beam evaluation horizontal or diagonal
- Compact design
- Aluminum housing
- Easy to install
-
Transmitter
-
Receiver
-
Monitoring height H
-
Profile length L
-
Evaluation electronics
-
Profile cross section
To be used with evaluation electronics LVE …/ LVX ../ LVB …
BN: brown- GN: green
- GY: grey
- WH: white
- YE: yellow
Technical data (typ.)
- Service voltage 20 … 26 V DC (see evaluation electronics)
- Assembly Threaded bolt (2)
- Profile cross section 12 x 24 mm
- Dimension
- A: 75 mm
- B: 300 mm
- X: 13,5 mm
- Y: 38,5 mm
- Profile length 450 mm
- Housing material Aluminum (natural)
- Protection class III, operation on protective low voltage
- Evaluation absolute, percentage, Configurable via evaluation electronics
- Evaluation electronics external
- Output function Configurable via evaluation electronics
- Switching output Configurable via evaluation electronics, NO, NC
- Light source LED
- Color Infrared
- Wavelength 880 nm
- Beam evaluation via external evaluation electronics
- Beam separation 10 mm
- Number of beams 40
- Monitoring height 390 mm
- Range 250 … 6.000 mm (adjustable via evaluation electronics)
- Measuring range 390 mm
- Ambient temperature during operation -20 … +40 °C
- Protection type IP 54 (IP 65 optional)
- Connection Cable, 4,0 m (with plug connector, additional variants on request)
More information / accessories https://www.di-soric.com/207192
di-soric GmbH & Co. KG . Steinbeisstraße 6 . DE-73660 Urbach . www.di-
soric.com
© di-soric . Right to change reserved . 13.08.2022 .
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>