di-soric LI 152-5-755-790 T Measuring Light Grids Owner’s Manual
- June 13, 2024
- di-soric
Table of Contents
di-soric LI 152-5-755-790 T Measuring Light Grids
Product Information
- Product Name: 206782 LI 152-5-755-790 T Light grids
- Function: Light grids with evaluation electronics for measuring and switching
- Features:
- Beam evaluation horizontal or diagonal
- Compact design
- Aluminum housing
- Easy to install
- Components:
1. Transmitter
2. Receiver
3. Monitoring height H
4. Profile length L
5. Evaluation electronics
6. Profile cross section- Color Codes:
- BN: brown
- GN: green
- GY: grey
- WH: white
- YE: yellow
- Technical Data:
- Service voltage
- Profile cross section
- Dimension
- Profile length
- Housing material
- Protection class
- Evaluation
- Evaluation electronics
- Output function
- Switching output
- Light source
- Color
- Wavelength
- Beam evaluation
- Beam separation
- Number of beams
- Monitoring height
- Range
Product Usage Instructions
To use the 206782 LI 152-5-755-790 T Light grids, please follow these instructions:
- Identify the transmitter and receiver units (1 and 2).
- Determine the monitoring height (H) required for your application.
- Install the light grids by aligning the transmitter and receiver units at the desired monitoring height.
- Measure the profile length (L) needed for your specific setup.
- Connect the evaluation electronics (5) to the light grids.
- Select the appropriate profile cross section (6) for your application.
- Refer to the color codes provided (BN, GN, GY, WH, YE) for wiring connections.
- Review the technical data for voltage, dimension, housing material, etc., to ensure compatibility with your setup.
- Adjust the beam evaluation (horizontal or diagonal) as required.
- Configure the output function and switching output based on your application needs.
- Ensure proper connection of the light source and set the desired color and wavelength.
- Determine the beam separation and number of beams required for accurate monitoring.
- Set the monitoring height according to your specific setup requirements.
- Verify the range of the light grids to ensure it covers the desired monitoring area.
For more information or to explore additional accessories, please visit https://www.di-soric.com/206782.
- With evaluation electronics LVE … / LVX … measuring and switching
- With evaluation electronics LVB … switching
- Beam evaluation horizontal or diagonal
- Compact design
- Aluminum housing
- Easy to install
- Transmitter
- Receiver
- Monitoring height H
- Profile length L
- Evaluation electronics
- Profile cross section
To be used with evaluation electronics LVE …. / LVX … / LVB …
- BN: brown
- GN: green
- GY: grey
- WH: white
- YE: yellow
Technical data (typ.)
- Service voltage 20 … 26 V DC (see evaluation electronics)
- Profile cross section 12 x 58 mm
- Dimension
- X: 17,5 mm
- Y: 17,5 mm
- Profile length 790 mm
- Housing material Aluminum (natural)
- Protection class III, operation on protective low voltage
- Evaluation absolute, percentage, Configurable via evaluation electronics
- Evaluation electronics external
- Output function Configurable via evaluation electronics
- Switching output Configurable via evaluation electronics, NO, NC
- Light source LED
- Color Infrared
- Wavelength 880 nm
- Beam evaluation via external evaluation electronics
- Beam separation 5 mm
- Number of beams 152
- Monitoring height 755 mm
- Range 250 … 6.000 mm (adjustable via evaluation electronics)
- Measuring range 755 mm
- Ambient temperature during operation -20 … +40 °C
- Protection type IP 54 (IP 65 optional)
- Connection Cable, 4,0 m (with plug connector, additional variants on request)
More information / accessories https://www.di-soric.com/206782
di-soric GmbH & Co. KG . Steinbeisstraße 6 . DE-73660 Urbach . www.di-
soric.com
© di-soric . Right to change reserved . 13.08.2022 .
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>